Management of sludge from fish ponds at the edge of the Itaparica Reservoir (Brazil): an alternative to improve agricultural production

Sludge generated in intensively managed tilapia fingerling breeding ponds near the Itaparica Dam in the semi-arid Brazilian northeastern region was tested as a soil conditioner to produce lettuce in an effort to mitigate the present environmental impact of the deposition of this sludge, thereby giving it a productive destiny. A greenhouse experiment was performed by mixing the sludge with a Haplic Planosol topsoil, a characteristic soil of the region, so that the sludge corresponded to 0, 25, 50, 75, and 100% of the mixture (substrate). The experiment was set up as a randomized block design with five blocks, each with three pots (5-kg substrate per pot) of the five sludge proportion treatments. One lettuce plant was transplanted into each pot, maintained under greenhouse conditions, and harvested 35 days after transplanting. Sludge, soil, and the substrates were evaluated for nutrient concentration and physical characteristics. Green and dry weights, stem diameter, and nitrogen, phosphorus, and potassium concentrations in the aboveground parts of the lettuce plants were determined. Sludge incorporation into the substrate improved its chemical and physical characteristics. The lettuce plants grew best in the substrate with 75% sludge, increasing its biomass production by 50% and more than doubling its nitrogen uptake.     

Leaf morphoanatomy of species tolerant to excess iron and evaluation of their phytoextraction potential

Setaria parviflora (Poir.) Kerguélen and Paspalum urvillei Steudel are grasses that grow naturally in a soil with high iron contents. This study aimed to characterize morphoanatomically and histochemically the iron phytotoxicity on leaves and evaluate the phytoextraction potential of these grasses. Saplings were cultivated in hydroponic solution with and without excess Fe-EDTA. Regarding measurements taken on leaves, reduction was observed among treatments of Fe-EDTA on height values of abaxial epidermis and bundle sheath in both species. As for iron histolocalization, stronger reaction was observed in leaves of S. parviflora, in comparison with P. urvillei. Anatomical damage, such as protoplast retraction, irregular xylem, changes in cell volume, and cell collapse, and visual symptoms, like leaf bronzing, chlorosis, and necrosis, were similar in both species when exposed to excess iron; however, P. urvillei showed more severe damage. This species accumulated more iron in shoots than S. parviflora and therefore is more favorable for use in phytoextraction. The root system of both species accumulated higher iron concentrations in relation to shoots.     

Biodegradation assessment of PLA and its nanocomposites

Poly(lactic acid) nanocomposites containing Cloisite 15A, Cloisite 30B, and Dellite 43B were prepared by melt-mixing in a batch mixer and were exposed to UV radiation, temperature, and microorganism in solution and in a compost. Exposed samples, collected along the time, were characterized by several techniques. While the addition of organoclays had a positive effect on thermal stability, the degradation rate of nanocomposites increased when exposed to UV radiation and microorganism. Moreover, the degradation rate depends on the organoclay type. Even though the degradation rate is higher for nanocomposites, Fourier transform infrared spectrometry and gel permeation chromatography results demonstrated that the degradation mechanism is the same.     

Can fish gill anomalies be used to assess water quality in freshwater Neotropical systems?

Gill anomalies in two fish species (Geophagus brasiliensis and Astyanax bimaculatus) were compared among three freshwater systems with different water quality: one eutrophic river, one eutrophic reservoir, and one oligotrophic reservoir. The raised hypotheses are that reservoirs with low water quality (eutrophic) have fish with more gills anomalies compared with reservoirs with high water quality (oligotrophic), and that the more stable environmental conditions of eutrophic rivers have fish with better healthy conditions than eutrophic reservoirs that have lesser stable environmental conditions. Gills of 36 adult individuals of G. brasiliensis and 23 of A. bimaculatus collected during the winter 2008 and winter 2009 were examined, and the proportions of occurrence of nine histological alterations were compared for the two species among the three systems using a binomial t test for independent samples. Histological changes in fish gills that are reversible and unspecific, such as epithelial lifting, interstitial edema, leukocyte infiltration, hyperplasia of the epithelial cells, lamellar fusion, and vasodilatation were common in both fish species in the three systems. However, lamellar aneurism, which is a more serious and often irreversible anomaly, and lamellar blood congestion occurred only in fish from the two reservoirs. Alternatively, necrosis occurred more in fish from the river. Fish gill anomalies in both species did not differ between the two reservoirs, despite having different water quality. We rejected the hypothesis that reservoirs with lower water quality have fish with more gill injuries compared with high water quality reservoirs. Moreover, the eutrophic river seems to affect differently the healthy condition of fish species, compared with the eutrophic reservoir.     

Simultaneous spectrophotometric determination of trace amount of polycyclic aromatic hydrocarbons in water samples after magnetic solid-phase extraction by using projection pursuit regression

Magnetic solid-phase extraction based on coated nano-magnets Fe₃O₄ was applied for the preconcentration of four polycyclic aromatic hydrocarbons (PAHs; anthracene, phenanthrene, fluorine, and pyrene) in environmental water samples prior to simultaneous spectrophotometric determination using multivariate calibration method. Magnetic nanoparticles, carrying target metals, were easily separated from the aqueous solution by applying an external magnetic field so, no filtration or centrifugation was necessary. After elution of the adsorbed PAHs, the concentration of PAHs was determined spectrophotometrically with the aid of a new and efficient multivariate spectral analysis base on principal component analysis-projection pursuit regression, without separation of analytes. The obtained results revealed that using projection pursuit regression as a flexible modeling approach improves the predictive quality of the developed models compared with partial least squares and least squares support vector machine methods. The method was used to determine four PAHs in environmental water samples.     

Simultaneous spectrophotometric determination of crystal violet and malachite green in water samples using partial least squares regression and central composite design after preconcentration by dispersive solid-phase extraction

In this paper, a simple, fast, and inexpensive method is introduced for the simultaneous spectrophotometric determination of crystal violet (CV) and malachite green (MG) contents in aquatic samples using partial least squares regression (PLS) as a multivariate calibration technique after preconcentration by graphene oxide (GO). The method was based on the sorption and desorption of analytes onto GO and direct determination by ultraviolet–visible spectrophotometric techniques. GO was synthesized according to Hummers method. To characterize the shape and structure of GO, FT-IR, SEM, and XRD were used. The effective factors on the extraction efficiency such as pH, extraction time, and the amount of adsorbent were optimized using central composite design. The optimum values of these factors were 6, 15 min, and 12 mg, respectively. The maximum capacity of GO for the adsorption of CV and MG was 63.17 and 77.02 mg g^?1, respectively. Preconcentration factors and extraction recoveries were obtained and were 19.6, 98% for CV and 20, 100% for MG, respectively. LOD and linear dynamic ranges for CV and MG were 0.009, 0.03–0.3, 0.015, and 0.05–0.5 (μg mL^?1), respectively. The intra-day and inter-day relative standard deviations were 1.99 and 0.58 for CV and 1.69 and 3.13 for MG at the concentration level of 50 ng mL^?1, respectively. Finally, the proposed DSPE/PLS method was successfully applied for the simultaneous determination of the trace amount of CV and MG in the real water samples.     

Lead isotope ratios in lichen samples evaluated by ICP-ToF-MS to assess possible atmospheric pollution sources in Havana,Cuba

Epiphytic lichens, collected from 119 sampling sites grown over “Roistonea Royal Palm” trees, were used to assess the spatial distribution pattern of lead (Pb) and identify possible pollution sources in Havana (Cuba). Lead concentrations in lichens and topsoils were determined by flame atomic absorption spectrophotometry and inductively coupled plasma (ICP) atomic emission spectrometry, respectively, while Pb in crude oils and gasoline samples were measured by ICP-time of flight mass spectrometry (ICP-ToF-MS). Lead isotopic ratios measurements for lichens, soils, and crude oils were obtained by ICP-ToF-MS. We found that enrichment factors (EF) reflected a moderate contamination for 71% of the samples (EF > 10). The ²⁰⁶Pb/²⁰⁷Pb ratio values for lichens ranged from 1.17 to 1.20 and were a mixture of natural radiogenic and industrial activities (e.g., crude oils and fire plants). The low concentration of Pb found in gasoline (<7.0 μg L^?1) confirms the official statement that leaded gasoline is no longer used in Cuba.     

Combining TiO2-photocatalysis and wetland reactors for the efficient treatment of pesticides

In the present work the photocatalytic and biological degradation of two commercial mixtures of pesticides (Folimat and Ronstar) and two fungicides (pyrimethanil and triadimenol) has been studied. The evolution of some components of these commercial products (dicofol, tetradifon and oxadiazon) and that of the two fungicides has been monitored by means of HPLC, GC-MS, TOC and toxicity (Lemna minor toxicity test) measurements. The photocatalytic method was able to degrade dicofol, tetradifon, pyrimethanil, triadimenol and the components of Ronstar with the exception of oxadiazon. In addition to this, the photocatalytic method eliminated pyrimethanil toxicity and reduced that of triadimenol by a 90%, Ronstar by a 78% and Folimat by an 87%. Nevertheless, the wetland reactors alone could reduce the toxicity of only the former. Finally, the proper dosage of the water containing the pesticides to a photocatalytic reactor followed by a wetland reactor resulted to be the most successful strategy for the detoxification of the studied compounds and their mixtures.     

Mass balance to assess the efficiency of a mechanical-biological treatment

Using mechanical-biological treatment of residual municipal solid waste, it is possible to significantly lower landfill volume and gas and leachate emissions. Moreover, the landfill characteristics are improved. The performance of the Mende (France) mechanical-biological treatment plant is assessed via mass balances coupled with manual sorting according to the MODECOMtrade mark methodology and biochemical methane potential after 90 days of incubation. The site includes mechanical sorting operations, a rotary sequential bioreactor, controlled aerobic stabilisation corridors, maturation platforms, and a sanitary landfill site for waste disposal in separated cells. Results showed that several steps could be improved: after a first sieving step, about 12% of the potentially biodegradable matter is landfilled directly without any treatment; mechanical disintegration of papers and cardboards in the rotary sequential bioreactor is insufficient and leads to a high proportion of papers and cardboards being landfilled without further treatment. Two fine fractions go through stabilisation and maturation steps. At the end of the maturation step, about 54% of the potentially biodegradable matter is degraded. The biochemical methane potential after 90 days of incubation is reduced by 81% for one of the two fine fractions and reduced by 88% for the other one. Considering the whole plant, there is a reduction of nearly 20% DM of the entering residual municipal solid waste.     

Factors and values of willingness to pay for improved construction waste management--a perspective of Malaysian contractors

Malaysia is facing an increase in the generation of waste and of accompanying problems with the disposal of this waste. In the last two decades, extensive building and infrastructure development projects have led to an increase in the generation of construction waste material. The construction industry has a substantial impact on the environment, and its environmental effects are in direct relation to the quality and quantity of the waste it generates. This paper discusses general characteristics of the construction contractors, the contractors' willingness to pay (WTP) for improved construction waste management, determining factors which affect the amount of their willingness to pay, and suggestions and policy implications in the perspective of construction waste management in Malaysia. The data in this study is based on contractors registered with the construction industry development board (CIDB) of Malaysia. Employing the open ended contingent valuation method, the study assessed the contractors' average maximum WTP for improved construction waste management to be RM69.88 (1US$=3.6 RM) per tonne of waste. The result shows that the average maximum WTP is higher for large contractors than for medium and small contractors. The highest average maximum WTP value is RM88.00 for Group A (large contractors) RM78.25 for Group B (medium-size contractors) and RM55.80 for Group C (small contractors). One of the contributions of this study is to highlight the difference of CIDB registration grade in the WTP for improved construction waste management. It is found that contractors' WTP for improved waste collection and disposal services increases with the increase in contractors' current paid up capital. The identified factors and determinants of the WTP will assist the formulation of appropriate policies in addressing the construction waste problem in Malaysia and indirectly improve the quality of construction in the country.