Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

With the increase in the number of municipal solid waste incineration (MSWI) plants constructed in China recently, great attention has been paid to the heavy metal leaching toxicity of MSWI residues. In this study, the effects of various parameters, including extractant, leaching time, liquid-to-solid ratio, leachate pH, and heavy metal content, on the release properties of Cd, Cr, Cu, Ni, Pb, and Zn from MSWI bottom ash were investigated. Partial least-squares analysis was employed to highlight the interrelationships between the factors and response variables. Both experimental research and geochemical modeling using Visual MINTEQ software were conducted to study the pH-dependent leaching behavior of these metals in fresh and weathered bottom ash, considering precipitation/dissolution and surface complexation reactions (adsorption by hydrous ferric oxide and amorphous aluminum oxide/hydroxide). The results showed that leachate pH was the predominant factor influencing heavy metal leachability. The leaching of Cu, Pb, and Zn was mainly controlled by precipitation/dissolution reactions, whereas surface complexation had some effect on the leaching of Cr, Cd, and Ni for certain pH ranges. The modeling results aggreed well with the experimental results. Part of this work was presented at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

陕西省雷电灾害易损性分析、评估及易损度区划

根据2002～2007年陕西省10个市的雷暴日和雷电灾害统计资料,结合陕西各市的经济和人口密度特征,提出了雷暴日数、雷电灾害频度、生命易损模数及经济易损模数作为各市雷电灾害易损性评估指标,并在此基础上,给出了陕西各市雷电灾害易损度评估结构.采用四级分区法对上述雷电灾害易损性评估指标进行了分级,并赋予各等级如下定值:极高级为1.0、高级为0.8、中级为0.5、低级为0.2.将陕西省10市按照四个雷电灾害易损性评估指标的所属等级获取相应等级值,将各市四个评估指标的等级值累加得到平均值作为雷电灾害易损性评估的评价指数,并利用上述四级分区法形成陕西省雷电灾害易损度区划.     

地震救灾过渡安置点避雷针的布设选点及安装要求

"5.12"汶川8级大地震波及范围很大,给陕西省部分地方造成了不小的损失.灾后,汉中、宝鸡的地震救灾过渡安置点由于缺乏防雷电保护,打雷时有遭受雷电灾害的可能,亟需要对其采取防雷电保护措施.对救灾过渡安置点采用独立避雷针进行防护,该措施安全可靠、简便易行,就成为首选,其布设选点要科学、规范,可使其效益最大化,避雷针的制作和安装应符合技术标准要求,做到牢固可靠,在施工中要因地制宜.综合考虑,始终把安全和牢靠放在首位.     

Improve Compliance with Limited Resources by a Three-Group Inspection Regime

Frequent monitoring and relatively high fines are usually necessary to bring about improvements in environmental quality, but more challenging for many countries with limited human, material, and financial resources is to put them into practice. This paper developed a three-group model of a state-dependent enforcement in a repeated game to improve the policy implementation under limited inspection capacities. A certain number of firms are grouped (group 1, group 2, group 3) for different supervision intensity (e.g., the order of inspection probability corresponding to each group is p ₁?<?p ₂?<?p ₃) based on their environmental performance. The optimal policy parameters, such as inspection probability of each group and the probability that a firm found in compliance is moved to a better reputation group, were obtained as the basis for regulator’s policy making. Numerical simulations indicated that the three-group inspection regime can significantly increase compliance rate as compared with static enforcement with the same monitoring probability. Among the number of firms in each group under steady state conditions, group 2 had the most, group 1 was the second, and group 3 had the smallest. Analysis and prediction of a three-group reputation example provided a good experiment for the model. The results give a practical reference for the policy makers with inspection capacity constraints to achieve higher compliance rate.     

Atmospheric depositional fluxes and sources apportionment of organochlorine pesticides in the Pearl River Delta region, South China

Organochlorine pesticides (OCPs) have variously been phased out in agricultural activities, but they are still widely detected in air, water, and soil systems due to their recalcitrant nature in the environment. The purposes of this study were to assess potential OCP pollution via dry and wet deposition over the fast developing Pearl River Delta area with 41,700 km², where the main effort has been focused on emerging pollutants such as petroleum hydrocarbons and PM2.5. We quantified both the dry and wet deposition fluxes of 19 OCPs including dichlorodiphenyltrichloroethanes (DDTs), endosulfans (Endos), and hexachlorocyclohexanes (HCHs). The results showed that each year about 67.4, 42.0, 15.0, and 8.07 kg of total OCPs, DDTs, Endos, and HCHs were returned to the ground, among which 11.7, 10.4, 0.84, and 0.16 kg were in the dry deposition forms. The large spatial variations in OCP deposition fluxes indicated that OCP pollution in the air is mainly influenced on local scales because evaporation from local soil is likely the major source of the phased out OCPs. Source analysis indicated that DDTs may be still in use as antifouling agent and/or dicofol, but Endos and HCHs were mainly derived from the residual of historical usage. The study suggests that the historical OCP pollutants are persistent at high levels in this area and should not be overlooked, while we tackle emerging pollutants.     

Accuracy and uncertainty assessment on geostatistical simulation of soil salinity in a coastal farmland using auxiliary variable

Understanding the spatial soil salinity aids farmers and researchers in identifying areas in the field where special management practices are required. Apparent electrical conductivity measured by electromagnetic induction instrument in a fairly quick manner has been widely used to estimate spatial soil salinity. However, methods used for this purpose are mostly a series of interpolation algorithms. In this study, sequential Gaussian simulation (SGS) and sequential Gaussian co-simulation (SGCS) algorithms were applied for assessing the prediction accuracy and uncertainty of soil salinity with apparent electrical conductivity as auxiliary variable. Results showed that the spatial patterns of soil salinity generated by SGS and SGCS algorithms showed consistency with the measured values. The profile distribution of soil salinity was characterized by increasing with depth with medium salinization (EC_e 4–8 dS/m) as the predominant salinization class. SGCS algorithm privileged SGS algorithm with smaller root mean square error according to the generated realizations. In addition, SGCS algorithm had larger proportions of true values falling within probability intervals and narrower range of probability intervals than SGS algorithm. We concluded that SGCS algorithm had better performance in modeling local uncertainty and propagating spatial uncertainty. The inclusion of auxiliary variable contributed to prediction capability and uncertainty modeling when using densely auxiliary variable as the covariate to predict the sparse target variable.     

PbO_2复合电极预处理甲苯二胺废水

通过涂覆—热分解法与电沉积法制备了β-PbO_2/α-PbO_2/SnO_2-Sb2O3/Ti复合电极(PbO_2复合电极),采用X射线衍射(XRD)、扫描电子显微镜(SEM)、循环伏安法(CV)、线性极化法(LSV)和加速寿命试验对电极进行表征。将PbO_2复合电极用于处理甲苯二胺(TDA)废水,考察了电解质浓度、电流密度对TDA降解效果的影响。实验结果表明:α-PbO_2呈梭状,β-PbO_2呈花菜状,多层结构的PbO_2电极利于提高电极的稳定性和活性;PbO_2复合电极的析氧电位(1.9 V)明显高于TDA的氧化电位(1.28 V),其使用寿命长达486 d;在电流密度为60 m A/cm2、Na2SO4质量浓度为10 g/L、电解时间为240 min的条件下,对COD为4 791.74 mg/L、TDA质量浓度为486.4mg/L的废水进行处理,TDA去除率高达97.3%,COD去除率可达88.1%。     

基于机器视觉的鱼类行为特征提取与分析

近年来,水污染问题备受关注。生物式水质监测成为目前国家环境保护工作的重要任务之一。为准确监测水质污染情况,本文以青鳉鱼(Oryzias latipes)为研究对象,采用非接触式的机器视觉监测技术,提取青鳉鱼的生理特征(呼吸频率)和运动特征(胸鳍和尾鳍的摆动频率),并分析这些特征与水质之间的关系。本文采用支持向量机(Support Vector Machine,SVM)准确提取鱼鳃,并根据鱼鳃呼吸面积大小变化计算出鱼的呼吸频率。基于形态学细化算法提取青鳉鱼骨架,求出胸鳍和尾鳍的摆动频率。结果显示:不同浓度铜离子暴露实验测得的青鳉鱼生理特征和运动特征与实际情况一致;通过对不同铜离子浓度下的毒性实验数据对比,发现了青鳉鱼的生理特征和运动特征会随不同的铜离子浓度发生相应变化,可以作为水质监测的评价标准。     

基于Ap/Vp的双薄壁高墩刚构桥抗震性能研究

为了研究地震频谱特性对柔性桥梁抗震性能的影响,以正弦波为例推导了地震动能量与A_p/V_p的关系,基于能力需求比提出了桥梁抗震性能评估方法及计算公式。以某典型高墩连续刚构桥为工程背景,采用地震动参数A_p=0.4g的22条正弦波和7条实际地震记录,对比研究了桥梁纵、横向抗震性能随A_p/V_p的变化规律。结果表明:在地震动参数A_p相同的情况下,桥梁关键截面抗震能力需求比在纵、横桥向均随A_p/V_p的增大而呈现增长的规律,最大增幅超过12.92倍(正弦波)和2.31倍(实际波);按正弦波得到能力需求比普遍大于实际波,且随A_p/V_p增大而增大的规律更明显。研究发现将地震动参数A_p作为单一的抗震设计指标会导致桥梁抗震性能离散性很大,A_p/V_p可作为柔性桥梁抗震设计的补充指标。     

高效脱硫菌的筛选及其性能研究

从高硫污染的活性污泥中富集培养,分离纯化得到一株可以降解噻吩的菌株s_4,并对该菌株的形态特征进行观察。应用Design—Expert8．0．5b软件进行响应面优化实验,研究了反应时间、噻吩浓度、微生物浓度3个因素的组合对菌株s_4脱硫效果的影响,并拟合得到多元二次回归方程,得出最佳实验条件。拟合结果表明,当反应时间27．46h,噻吩浓度为1．04％,微生物浓度4．04％时,预测噻吩降解率为14．8％,通过验证得最佳条件下的降解率为14．3％,与预测值相符。