Synthesis, characterization and application of Lagerstroemia speciosa embedded magnetic nanoparticle for Cr(VI) adsorption from aqueous solution

Lagerstroemia speciosa bark (LB) embedded magnetic nanoparticles were prepared by co-precipitation of Fe²⁺ and Fe³⁺ salt solution with ammonia and LB for Cr(VI) removal from aqueous solution. The native LB, magnetic nanoparticle (MNP), L. speciosa embedded magnetic nanoparticle (MNPLB) and Cr(VI) adsorbed MNPLB particles were characterized by SEM–EDX, TEM, BET-surface area, FT-IR, XRD and TGA methods. TEM analysis confirmed nearly spherical shape of MNP with an average diameter of 8.76 nm and the surface modification did not result in the phase change of MNP as established by XRD analysis, while led to the formation of secondary particles of MNPLB with diameter of 18.54 nm. Characterization results revealed covalent binding between the hydroxyl group of MNP and carboxyl group of LB particles and further confirmed its physico-chemical nature favorable for Cr(VI) adsorption. The Cr(VI) adsorption on to MNPLB particle as an adsorbent was tested under different contact time, initial Cr(VI) concentration, adsorbent dose, initial pH, temperature and agitation speed. The results of the equilibrium and kinetics of adsorption were well described by Langmuir isotherm and pseudo-second-order model, respectively. The thermodynamic parameters suggest spontaneous and endothermic nature of Cr(VI) adsorption onto MNPLB. The maximum adsorption capacity for MNPLB was calculated to be 434.78 mg/g and these particles even after Cr(VI) adsorption were collected effortlessly from the aqueous solution by a magnet. The desorption of Cr(VI)-adsorbed MNPLB was found to be more than 93.72% with spent MNPLB depicting eleven successive adsorption–desorption cycles.     

Iron and aluminium based adsorption strategies for removing arsenic from water

Arsenic is a commonly occurring toxic metal in natural systems and is the root cause of many diseases and disorders. Occurrence of arsenic contaminated water is reported from several countries all over the world. A great deal of research over recent decades has been motivated by the requirement to lower the concentration of arsenic in drinking water and the need to develop low cost techniques which can be widely applied for arsenic removal from contaminated water. This review briefly presents iron and aluminium based adsorbents for arsenic removal. Studies carried out on oxidation of arsenic(III) to arsenic(V) employing various oxidising agents to facilitate arsenic removal are briefly mentioned. Effects of competing ions, As:Fe ratios, arsenic(V) vs. arsenic(III) removal using ferrihydrite as the adsorbent have been discussed. Recent efforts made for investigating arsenic adsorption on iron hydroxides/oxyhydroxides/oxides such as granular ferric hydroxide, goethite, akaganeite, magnetite and haematite have been reviewed. The adsorption behaviours of activated alumina, gibbsite, bauxite, activated bauxite, layered double hydroxides are discussed. Point-of-use adsorptive remediation methods indicate that Sono Arsenic filter and Kanchan™ Arsenic filter are in operation at various locations of Bangladesh and Nepal. The relative merits and demerits of such filters have been discussed. Evaluation of kits used for at-site arsenic estimation by various researchers also forms a part of this review.     

A direct comparison of the consequences of plant genotypic and species diversity on communities and ecosystem function

Biodiversity loss is proceeding at an unprecedented rate, yet we lack a thorough understanding of the consequences of losing diversity at different scales. While species diversity is known to impact community and ecosystem processes, genotypic diversity is assumed to have relatively smaller effects. Nonetheless, a few recent studies suggest that genotypic diversity may have quantitatively similar ecological consequences compared to species diversity. Here we show that increasing either genotypic diversity of common evening primrose (Oenothera biennis) or species diversity of old-field plant species resulted in nearly equivalent increases (approximately 17%) in aboveground primary production. The predominant mechanism explaining this effect, niche complementarity, was similar for each type of diversity. Arthropod species richness also increased with both types of plant diversity, but the mechanisms leading to this effect differed: abundance-driven accumulation of arthropod species was important in plant genotypic polycultures, whereas resource specialization was important in plant species polycultures. Thus, similar increases in primary productivity differentially impacted higher trophic levels in response to each type of plant diversity. These results highlight important ecological similarities and differences between genotypic and species diversity and suggest that genotypic diversity may play a larger role in community and ecosystem processes than previously realized.     

An overview on the production of pigment grade titania from titania-rich slag.

To recover pigment grade TiO2, operating plants all over the world use chemical processes. Slag-based technology is considered to be attractive because of low waste generation and low chemical cost due to high titanium content and is poised to replace the conventional technology. This paper provides a review of the slag-based technology with the specific aim to produce leachable slag and achieving high titania yield from recovered wastes. Leachable oxides of the lower oxidation state, such as TiO and Ti2O3, facilitate the leaching process. However, during smelting these oxides increase the viscosity of the slag. Formation of titanium carbide or carbonitride is also not desirable as it leads to resistance to the leaching of titanium. This report highlights the problems and their possible solutions to obtain leachable slag.     

Environmental assessment,microstructural behaviour,stress–strain characteristics,and effect of exposure to extreme temperature on sustainable concrete made with dolomite mining residues

Environmental Science and Pollution Research - Mining and extraction of stones and minerals play a significant role in many countries economic growth in the world. The production of dolomite...     

A review on comparative study of Savonius wind turbine rotor performance parameters

One approach for reducing the level of environmental contamination threats around the world is to use renewable energy-harvesting equipment. Wind is a potential environmental resource that has become a desirable aspect of urban use due to advances in wind turbine design technology. Other variants have been developed based on the classic vertical-axis Savonius rotor model, which, according to experimental test findings and computational calculations, show higher operational characteristics performance. Generated power and shaft torque operational results are obtained by providing specific rotor blade shapes in these models, one of the most common designs, among small-scale rotor which uses a drag-based vertical axis whereas Savonius turbines having large-scale rotors not developed yet. This kind of rotor has the advantages of being simple to design, affordable, performing well at low speeds, and turns to flow direction independently. However, it was discovered that the Savonius rotor suffers through high quantity of negative torques created by the returning blade after a number of examinations into its performance. Many studies on various rotor types have been conducted to resolve the Savonius turbine’s performance constraints. The research showed and analyzed the difficulties and modification in design parameters of rotor, as well as their major impact on rotor performance.

     

Bactericidal effects of adsorbent on Escherichia coli for use in disinfection of drinking water

A synergistic action of silver (Ag) and groundnut husk carbon was shown, which markedly enhanced inactivation of Escherichia coli. The purpose of this study was to assess the feasibility of using a silver-impregnated groundnut husk carbon adsorbent (AdSG) for drinking water disinfection and evaluate % disinfection of E. coli. The results showed that contact of bacterial cells with AdSG resulted in a transfer of Ag ion to the cell, as evidenced by bactericidal activity. It is also possible that Ag produced generation of reactive oxygen species in the cell that led to bactericidal activity of the adsorbent. Data indicated that AdSG was effective as a bactericidal agent and may prove to be economically beneficial in drinking water disinfection.     

Air pollutant levels are 12 times higher than guidelines in Varanasi,India. Sources and transfer

Air quality in an urban atmosphere is regulated by both local and distant emission sources. For air quality management in urban areas, identification of sources and their relationships with local meteorology and air pollutants are essential. The critical condition of air quality in Indo-Gangetic plain is well known, but lack of data on both local and distant emission sources limits the scope of improving air quality in this region. Concentrations of particulate matter of size lower than 10 μm (PM₁₀) were assessed in the highly urbanized Varanasi city situated in middle Indo-Gangetic plain of India from 2014 to 2017, to identify the distant air pollution sources based on trajectory statistical models and local sources by conditional bivariate probability function. Modifying effects of meteorology and air pollutants on PM₁₀ were also explored. Mean PM₁₀ concentration for the study period was 244.8 ± 135.8 μg m^?3, which was 12 times higher than the WHO annual guideline. Several distinct sources of traffic as the major source of PM₁₀ were identified in the city. Trajectory statistical models like cluster analysis, potential source contribution function and concentration-weighted trajectory showed significant contributions from north-west and eastern directions in the transport of polluted air masses to the city. Dew point, wind speed, temperature and ventilation coefficient are the major factors in PM₁₀ formation and dispersion.