冷轧厂废水处理破乳系统的改造

叙述了冷轧厂废水处理破乳系统原设计存在的问题，全面地介绍了该系统改造方案的选择，确定及实施情况，重点说明了超滤破乳工艺流程，主要性能参数及改造后的效果。     

以粉煤灰和电石渣为催化剂的聚丙烯裂解模型研究

对粉煤灰和电石渣为催化剂的聚丙烯裂解进行模型研究.通过模型计算了裂解反应的表观活化能、频率因子、反应级数等.模型计算表明随着反应温度的升高反应速率增加,达到相同转化率所需反应时间减少.当剂塑比从0增加到30%时,聚丙烯裂解的活化能呈现降低的趋势,特别当剂塑比为30%时,其活化能降低约50%.说明粉煤灰和电石渣对聚丙烯裂解具有一定的催化效果.     

BIOFOR工艺处理中成药废水

采用一段式生物过滤氧化反应器(BIOFOR)处理中成药生产废水与部分生活污水的综合废水。运行1a的结果表明:当进水CODCr为500mg/L,BOD5为230mg/L,SS为250mg/L,BOD5容积负荷为4·1kg/(m3·d),气水比为6·6∶1时,除冬季排水CODCr偶尔高于60mg/L外,其它季节排水中CODCr≤50mg/L,系统出水达到《污水综合排放标准》(GB8978-1996)一级排放标准。     

Toward Integrated Environmental Management for Challenges in Water Environmental Protection of Lake Taihu Basin in China

Lake Taihu is the third largest freshwater lake in China. It serves many social, economic, and ecological purposes in the drainage basin. Unfortunately, the water has been heavily polluted due to rapid industrialization and urbanization during the last two decades. Notwithstanding great efforts made so far to improve the water quality, the environmental situation is still far from being optimistic. The basin and the lake are facing a range of severe environmental challenges: rapid socio-economic development continues to place great pressures on the environment, current pollution control projects have many problems from the viewpoint of effectiveness and efficiency of their implementations, and the non-point sources of pollution such as agricultural fields, for which control is more difficult than for industrial point sources, have become the main contributors to serious eutrophication of the lake. Considering the characteristics of the environmental challenges and problems confronting the basin and the lake, we focus on integrated environmental management (IEM) as a promising and effective approach to overcome these predicaments. Current practices and problems of environmental management in the basin are examined, and potential future developments are discussed. Three aspects of the IEM are emphasized: institutional cooperation, public participation, and internalization of environmental externalities. We think these are the most critical for not only the basin but also for the whole of China to achieve a sustainable society.     

C-RAG模型在砷污染场地中的修正及应用研究

为了解我国基于人体健康《建设用地土壤污染风险评估技术导则》 (Chinese Risk Assessment Guide, C-RAG)在矿区场地中的分析模式及应用情景,以青海某废弃矿区场地为例,在结合矿场未来规划的基础上,通过对C-RAG模型参数的修正和改进,研究了该场地的风险状况及修复目标值,为污染地块适度修复提供...     

防控禽流感

当前,一些国家高致病性禽流感疫情严重,我国的疫情也十分严峻。充分估计防控禽流感工作的艰巨性和复杂性, 才能有力、有序、有效地开展好防控工作。     

Waste-to-energy for circular low-carbon society in Taiwan: a case study

Journal of Material Cycles and Waste Management - Taiwan is a developed nation with a high dependence (97.4%) on imported energy in 2021. Thus, the Taiwan government established the energy policy...     

氯苯驯化活性污泥对同类有机物的好氧降解性比较研究

利用测定微生物呼吸耗氧量的方法,对氯苯类中的５种优先污染物：氯苯,邻,间,对－二氯苯１,２,４－三氯苯,用接种活性污泥和经氯苯驯化的污泥地它们的生物降解性能进行了测试。实验结果表明,用未经驯化的污泥,５种氯苯皆存在的抑制作用,抑制作用的大小和抑制时间的长短氯代程度和浓度的影响,用氯苯将此污泥驯化后,该污染不仅表现出对苯具有降解能力,而且也表现出邻二氯苯,间二氯苯等同类有机物的共代谢降解能力,经分析     

固定化甲烷八叠球菌研究—─甲烷八叠球菌富集分离和固定化

用亨盖特（Hungate）厌氧技术,以甲醇为唯一碳源获得了甲烷八叠球菌的富集培养物,以甲醇或乙酸钠（或两者各50％）为碳源滚管培养,获得了以甲烷八叠球菌的分离培养物。用聚乙烯醇（PVA）为包埋剂对甲烷八叠球菌sp固定化,并对其特性进行了研究。结果表明：固定化甲烷八叠球菌与非固定化甲烷八叠球菌的总产气量相似,但两者的产气特性有明显不同。固定化甲烷八叠球菌产气迟于非固定化甲烷八叠球菌,固定化甲烷八叠球菌的产气集中,在产气的6天中,平均日产气量30.88mL甲烷,最高产气量可达2.80mL甲烷/h,在产气高峰两天中的产气量占总产气量的66.0％。非固定化甲烷八叠球菌产气平稳,平均日产气量为8.91mL甲烷。固定化甲烷八叠球菌的电子显微镜观察结果表明,细胞在固定介质中多呈较大包囊存在,包囊直径30～50μm。     

云南省大气污染扩散输送特征研究

通过分析各种野外探测资料和常规气象资料,全面讨论了影响云南省大气扩散输送能力的各种特征量的变化和特点,并试图说明高原山区的特殊地形及局地小气候条件对这些特征量的影响,认为云南全省大气扩散输送具有以下特征：大气稳定度以中性类居多,频率占50％以上;风速廓线指数值比平原地区大得多,也比一般山区的大;大气混合层高度春冬季较大,夏秋季较小,下午较大,凌晨较小;滇东和滇西北扩散参数较大,滇南较小;辐射雾出现频繁是一种影响当地大气扩散输送的天气现象。