Sequence of the main geochemical controls on the Cu and Zn fractions in the Yangtze River estuarine sediments

Metal speciation can provide sufficient information for environmental and geochemical researches. In this study, based on the speciation determination of Cu and Zn in the Yangtze Estuary sediments, roles of eight geochemical controls (i.e., total organic carbon (TOC), clay, Fe/Mn in five chemical fractions and salinity) are fully investigated and sequenced with correlation analysis (CA) and principal components analysis (PCA). Results show that TOC, clay and Fe/Mn oxides are key geochemical factors affecting the chemical speciation distributions of Cu and Zn in sediments, while the role of salinity appears to be more indirect effect. The influencing sequence generally follows the order: TOC>clay>Mn oxides>Fe oxides>salinity. Among the different fractions of Fe/Mn oxides, residual and total Fe content, and exchangeable and carbonate Mn exert the greatest influences, while exchangeable Fe and residual Mn show the poorest influences.     

Removal of elemental mercury by KI-impregnated clay

This study described the use of clay impregnated by KI in gas phase elemental mercury (Hg^o) removal in flue gas. The effects of KI loading, temperature, O₂, SO₂ and H₂O on Hg^o removal were investigated using a fixed bed reactor. The Hg^o removal efficiency of KI-clay with 3% KI loading could maintain at a high level (approximately 80 %) after 3 h. The KI-clay demonstrated to be a potential adsorbent for Hg^o removal when compared with activated carbon based adsorbent. O₂ was found to be an important factor in improving the Hg^o removal. O₂ was demonstrated to assist the transfer of KI to I₂ on the surface of KI-clay, which could react with Hg^o directly. NO and SO₂ could slightly improve Hg^o removal, while H₂O inhibited it greatly. The results indicated that after adsorption, most of the mercury escaped from the surface again. Some of the mercury may have been oxidized as it left the surface. The results demonstrated that the chemical reaction primarily occurred between KI and mercury on the surface of the KI-clay.     

Multiphase redistribution differences of polycyclic aromatic hydrocarbons (PAHs) between two successive sediment suspensions

Successive sediment suspensions often happen in estuary, yet little research has probed into the difference in the release behaviors of organic compounds among different suspensions. This study took polycyclic aromatic hydrocarbons (PAHs) as typical organic contaminants and investigated the release behaviors between two successive suspensions with a particle entrainment simulator (PES). Results showed that successive sediment suspensions lowered the concentration of dissolved PAHs in the overlying water via facilitating the re-adsorption of dissolved PAHs onto the suspended particles. Fast-release and slow-release periods of PAHs were successively observed in the both suspensions. The concentration changes of dissolved PAHs in the second suspension were generally similar with but hysteretic to those in the first suspension. More vigorous desorption and re-absorption of PAHs were induced in the second suspension. Successive sediment suspensions obviously decreased the concentrations of mineral composition and organic matters in the overlying water, which significantly affects multiphase distribution of PAHs.     

Key features of new particle formation events at background sites in China and their influence on cloud condensation nuclei

New particle formation (NPF) event at multi rural sites in China Identifying the characteristics of NPF event Comparing NPF event between clean and polluted conditions Quantifying contribution to the cloud condensation nuclei Implication of climate and air quality Long-term continuous measurements of particle number size distributions with mobility diameter sizes ranging from 3 to 800 nm were performed to study new particle formation (NPF) events at Shangdianzi (SDZ), Mt. Tai (TS), and Lin’an (LAN) stations representing the background atmospheric conditions in the North China Plain (NCP), Central East China (CEC), and Yangtze River Delta (YRD) regions, respectively. The mean formation rate of 3-nm particles was 6.3, 3.7, and 5.8 cm⁻³·s⁻¹, and the mean particle growth rate was 3.6, 6.0, and 6.2 nm·h⁻¹ at SDZ, TS, and LAN, respectively. The NPF event characteristics at the three sites indicate that there may be a stronger source of low volatile vapors and higher condensational sink of pre-existing particles in the YRD region. The formation rate of NPF events at these sites, as well as the condensation sink, is approximately 10 times higher than some results reported at rural/urban sites in western countries. However, the growth rates appear to be 1–2 times higher. Approximately 12%–17% of all NPF events with nucleated particles grow to a climate-relevant size (>50 nm). These kinds of NPF events were normally observed with higher growth rate than the other NPF cases. Generally, the cloud condensation nuclei (CCN) number concentration can be enhanced by approximately a factor of 2–6 on these event days. The mean value of the enhancement factor is lowest at LAN (2–3) and highest at SDZ (~4). NPF events have also been found to have greater impact on CCN production in China at the regional scale than in the other background sites worldwide.     

工业锅炉检验的节能减排

本文通过对锅炉的整个运行过程的检验,方面普遍存在的问题,在分析大量文献资料的基础上,术。针对各个环节进行分析,总结了工业锅炉在节能减排结合实际工作经验,提出了一些节能减排的方法和技术。     

The feasibility of concentrated rural settlement in a context of post‐disaster reconstruction: a study of China

There is growing appreciation of the use of concentrated rural settlement as an effective means of implementing infrastructure projects and helping to achieve sustainable development in rural areas. This occurs in China through the exchange of rural residential land for urban construction. However, this policy has not been effective under normal circumstances (called development‐driven conditions) as frequently farmers are reluctant to accept such an exchange. By contrast, in a time of disaster, such as after the 2008 earthquake in Sichuan Province, China, rural victims have accepted this policy of rural residential land exchange. Employing game theory, this paper identifies the reasons for the different outcomes and it contends that the implementation of concentrated rural settlement practice under disaster‐induced conditions is more effective than its introduction under development‐driven conditions. The results of the analysis indicate that, in China, concentrated rural settlement is feasible in a context of post‐disaster reconstruction.     

N2O emission from a sequencing batch reactor for biological N and P removal from wastewater

Nitrous oxide （N2O） is a greenhouse gas that can be released during biological nitrogen removal from wastewater. N2O emission from a sequencing batch reactor （SBR） for biological nitrogen and phosphorus removal from wastewater was investigated, and the aims were to examine which process, nitrification or denitrification, would contribute more to N2Oemission and to study the effects of heterotrophic activities on N2O emission during nitrification. The results showed that N2O emission was mainly attributed to nitrification rather than to denitrification. N2O emission during denitrification mainly occurred with stored organic carbon as the electron donor. During nitrification, NaO emission was increased with increasing initial ammonium or nitrite concentrations. The ratio of N2O emission to the removed ammonium nitrogen （N2O- N/NH4-N） was 2.5% in the SBR system with high heterotrophic activities, while this ratio was in the range from 0.14% to 1.06% in batch nitrification experiments with limited heterotrophic activities.     

我国最大的近代史博物馆南京总统府

南京市长江路292号,是我国最大的近代历史博物馆南京总统府所在地。我们出差南京顺道前往参观。     

Utilization of solidified phosphogypsum as Portland cement retarder

The utilization of the phosphogypsum (PG) as cement retarder is both an economical and an ecological approach to treat this solid waste. Cement using raw PG as retarder has two problems pressing for solution,namely, delaying the setting time and difficulty being fed into the cement mill. The soluble phosphates in PG behave as super-retarder and bring about retarding in the setting process of cement made with PG. Two types of solidified phosphogypsum (SPG) were prepared to solve those two problems. The strength and the water stability of the SPG were good enough to ensure that they may be conveyed easily and fed into the cement mill stably. The cements with SPG had a similar setting time and strength as cement made with natural gypsum (NG). The microstructure of two kinds of SPG were observed with SEM. During factory application of SPG, good techniques and economic benefits were obtained.     

Determination of three endocrine disrupting chemicals,triclosan, 4-n-nonylphenol,and di-n-butyl phthalate using stir bar sorptive extraction in samples of different matrices

Three endocrine disrupting chemicals (EDCs), triclosan (TCS), 4-n-nonylphenol (4-n-NP), and di-n-butyl phthalate (DBP) were determined using stir bar sorptive extraction (SBSE) along with high-performance liquid chromatography/photodiode array detection (HPLC/DAD). Benzyl butyl phthalate was used as an internal standard. The targeted analytes could be rapidly determined with limits of quantification (LOQ) ranging from 4.1 (DBP), 10 (TCS), to 34 (4-n-NP)?µg?L^?1 in real samples such as bottled waters, personal care products, soaps, lotions, and urine. The results show that the developed analytical scheme is solvent-saving, efficient, and capable of fast screening samples for these common EDCs.