Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

Modeling assessment for ammonium nitrogen recovery from wastewater by chemical precipitation

Chemical precipitation to form magnesium ammonium phosphate (MAP) is an effective technology for recovering ammonium nitrogen (NH4 +-N). In the present research, we investigated the thermodynamic modeling of the PHREEQC program for NH4 +-N recovery to evaluate the effect of reaction factors on MAP precipitation. The case study of NH4 +-N recovery from coking wastewater was conducted to provide a comparison. Response surface methodology (RSM) was applied to assist in understanding the relative significance of reaction factors and the interactive effects of solution conditions. Thermodynamic modeling indicated that the saturation index (SI) of MAP followed a polynomial function of pH. The SI of MAP increased logarithmically with the Mg2+/NH4 + molar ratio (Mg/N) and the initial NH4 +-N concentration (CN), respectively, while it decreased with an increase in Ca2+/NH4 + and CO3 2??/NH4 + molar ratios (Ca/N and CO3 2??/N), respectively. The trends for NH4 +-N removal at different pH and Mg/N levels were similar to the thermodynamic modeling predictions. The RSM analysis indicated that the factors including pH, Mg/N, CN, Ca/N, (Mg/N) (CO3 2??/N), (pH)2, (Mg/N)2, and (CN)2 were significant. Response surface plots were useful for understanding the interaction effects on NH4 +-N recovery.     

响应面法优化复合微生物吸附剂对低浓度Cr3+的吸附

根据已有4种微生物吸附剂的吸附基团存在的差异特征,将其复配成复合吸附剂,借助统计学方法研究其对低ρ(Cr3+)废水的吸附性能.在单因素试验基础上,利用P-B(Plackett-Burman)法筛选出吸附过程4个主要影响因素分别为pH,初始ρ(Cr3+)及微生物吸附剂XB和TQ的投加量,应用最陡爬坡试验接近主要因素最优水平,采用Box-Behnken试验设计和响应面分析得到对低浓度Cr3+吸附过程的二阶模型.结果表明,最优吸附条件为pH 4.0,初始ρ(Cr3+)为4.86mg/L,XB和TQ的投加量分别为0.20和0.13 g/L,实际吸附率达到87.54%,与理论预测值(87.68%)接近,且高出单一吸附剂吸附率7.79%～17.35%.FT-IR扫描显示,复合微生物吸附剂性能提高与表面基团增多有关.通过响应面分析法优化复合微生物吸附,吸附性能明显提高.     

小型燃煤工业锅炉NO_x形成与释放规律模拟研究

NOx是我国十二五期间重点控制的污染物,燃煤工业锅炉是其重要来源。为了研究燃煤工业锅炉NOx的形成与释放规律,在实验室模拟了不同煤种的燃烧过程。采用原煤/焦炭燃烧法分别研究挥发分氮和焦炭氮生成NOx的反应,探讨燃料型NOx的形成与释放规律,并解释试验模拟条件下燃煤NOx产污系数和现场实测值的差异。结果表明,试验中烟煤、无烟煤、煤焦的NO转化率平均值分别为25.77%,22.17%和11.98%,产污系数平均值分别为4.31,5.08和2.00kg/t,高于现场实测结果核算值。燃煤工业锅炉NOx以燃料型为主,燃料型NOx的形成和释放是一个复杂的多相反应过程,由挥发分氮的氧化还原反应和焦炭氮的氧化还原反应组成,煤种、温度、空气流量、粒径、氧含量等因素对4种反应各自影响及影响程度并不相同。     

羟基多溴联苯醚对鲤鱼急性毒性及定量结构活性关系

羟基多溴联苯醚是一类具有环境风险的新兴污染物,它们已经在众多环境介质甚至人体内广泛存在。参照GB/T13267-91标准方法,采用静态生物急性毒性试验,测定了6种羟基多溴联苯醚(2′-OH-BDE7、4′-OH-BDE17、2′-OH-BDE28、2′-OH-BDE68、4′-OH-BDE90和2′-OH-BDE123)对普通鲤鱼的急性毒性96 h-LC50值,分别为697、1 130、854、550、644和522 ng.mL-1。除4′-OH-BDE17为高毒物质外,其他5种OH-PBDEs均为剧毒物质,高溴代的2′-OH-BDE123毒性最大。选用OH-PBDEs的KOW参数及由MOPAC软件PM3算法计算出的16个量子化学参数(EHomo、qBr+、ELumo等)为描述符,运用一元线性回归分析分别研究了96 h-LC50与他们之间的相关关系。结果表明:lgKOW和ELumo与6种羟基多溴联苯醚的96 h-lg LC50表现出较好的相关性,复相关系数均大于0.96,根据方程得到的96 h-lg LC50预测值与实验值基本相同,进一步对环境中广泛检出的其它OH-PBDEs的96 h-LC50值也进行了预测。     

成都地铁4号线施工期环境影响分析及对策

文章分别从施工噪声及振动环境、大气环境、水环境等方面分析了成都地铁4号线一期工程施工期对环境的影响,指出了上述几个方面对环境要素的影响范围及程度,并提出了对噪声振动源集中布置、合理安排作业时间、工地内定期洒水防尘、施工污废水分类处理排放等防治对策,最后从工程实施全过程的角度提出了加强环境管理的具体措施。     

粉煤灰基质复合滤料吸附Mn^2＋试验研究

以粉煤灰基质复合滤料为吸附材料,通过单因素和正交实验相结合的实验方法,考察了吸附滤料投加量、吸附时间、原水初始浓度、振荡频率、温度等因素对除锰效果的影响。从单因素实验可知：随着滤料质量的增大,Mn2＋去除率在开始时增长幅度较大,后来逐渐趋于平缓。在正交实验中固定滤料投加量为300 g/L,发现在锰离子的吸附过程中,吸附时间的影响最大,随后分别是原水浓度和温度,振荡频率的影响程度最小。     

稀释接种法测BOD5考核样品的一些注意点

用稀释接种法测定BOD5时,由于操作繁琐,全部实验时间需要5d,任一环节出现问题都会影响实验结果。在进行考核实验时,由于时间紧,样品量有限,因此每个实验操作步骤都要谨慎仔细。通过实践经验,就BOD,考核实验总结了一些注意点。     

主成分分析法在水环境质量评价中的应用进展

对研究水质的一种多元统计方法——主成分分析法做了详细介绍,并对主成分分析法在河流、地下水、矿区、湖泊水质评价中的应用进行了综述,简要分析了主成分分析法在水环境质量评价中尚有不足之处。     

型煤产业发展与提高

本文论述发展工业型煤产业的重要意义和技术质量保证,洁净煤技术是控制污染和节约能源,提高煤炭资源利用率的重要技术项目,将粉煤生产成型煤,为工业、民用提供洁净的燃料,既充分利用煤炭资源同时改善能源结构,又有显著的环保效益,国家把煤炭产业列入中国洁净煤技术有限发展项目,目前制约型煤产业的发展要造气型和燃烧型煤并举,同时有利于用户的节能效益。