深冲钢板塑性变形形为研究

单相塑性材料的强度和塑性基本上是分别研究讨论的。此文以低碳深冲钢板为例,从能量观点出发,讨论了强度和塑性的内在制约关系,唯象地提出了单相塑性材料塑性破坏的判据,并解释了几个实验现象。此文的研究有助于加深对深冲钢塑性变形形为的理解。     

成都城区蔬菜地土壤中农药残留及其分布特征

采用GC-ECD检测、GC/MS-MS确证的方法对成都城区14个区县蔬菜地土壤中23种有机氯农药（OCPs）进行分析,以揭示OCPs的残留现状及其分布特征。结果表明,OCPs残留水平在不同区县间差异很大,变化范围20.18～104.33μg.kg-1之间,近郊区县（双流、龙泉驿、郫县、新都、温江）远低于边缘区县。被检出的18种OCPs中,DDTs、HCHs检出率最高（100%）,残留水平为16.11～99.51、1.31～9.34μg.kg-1,分别占OCPs残留总量质量分数的87.68%、8.15%;六氯苯（HCB）次之（90%）;灭蚁灵、环氧七氯、硫丹Ⅰ和γ-氯丹也有不同程度的检出（44.29%～47.14%）,主要分布在近郊区县;艾氏剂、狄氏剂、异狄氏剂、毒杀芬的检出率较低（32.86%～37.14%）,多分布于彭州、都江堰、大邑、崇州等地。土壤中OCPs的各种异构体、代谢物变化规律显示,DDTs、HCHs残留主要源于早期的使用或大气输入,但不排除金堂、青白江、新津地区近期可能有新的DDTs输入,崇州、彭州、都江堰、大邑地区可能有HCHs输入。     

Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.     

The size distribution of airborne bacteria and human pathogenic bacteria in a commercial composting plant

•Bacterial concentrations from eight stages were 10⁴–10⁵copies/m³. •Diameter influenced clustering of bacterial and HPB lineages. •Dg of 8 HPB ranged from 2.42 to 5.09 μm in composting areas. •Dg of 8 HPB ranged from 3.70 to 8.96 μm in packaging areas. •HPB had high concentrations and small sizes in composting areas. Composting plants are regarded as one of the important sources of environmental bioaerosols. However, limitations in the size distribution of airborne bacteria have prevented our comprehensive understanding of their risk to human health and their dispersal behavior. In this study, different sizes of airborne bacteria were collected using an eight-stage impactor from a full-scale composting facility. Size-related abundance and communities of airborne bacteria as well as human pathogenic bacteria (HPB) were investigated using 16S rRNA gene sequencing coupled with droplet digital PCR. Our results indicate that the bacterial concentrations from the eight stages were approximately 10⁴–10⁵copies/m³. Although no statistical correlation was detected between the particle size and the Shannon index, the influence of size on bacterial lineages was observed in both composting and packaging areas. For airborne bacteria from different stages, the dominant phyla were Firmicutes, Proteobacteria, and Actinobacteria, and the dominant genera was Bacillus. Seven out of eight HPB with a small geometric mean aerodynamic diameter had a high concentration in composting areas. Based on diameters of 2.42 to 5.09 μm, most HPB in the composting areas were expected to be deposited on the bronchus and secondary bronchus. However, in the packaging areas, the deposition of HPB (diameters 3.70 to 8.96 μm) occurred in the upper part of the respiratory tract. Our results on the size distribution, abundance, and diversity of these bacteria offer important information for the systematic evaluation of bacterial pathogenicity and the potential health impacts on workers in composting plants and the surrounding residents.     

Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal

• Mechanochemical treatment reduced the calcination temperature for biochar synthesis. • Biochar is converted to graphite after mechanochemical treatment. • Biochar was reduced to nanoscale after mechanochemical treatment. Biochar (BC) has been extensively studied as adsorbent for the treatment of water pollution. Despite the distinct advantages, the high calcination temperature and low adsorption capacity of pristine BC limit its practical applications. Most of the former studies focused on the structure and/or surface modification to improve the adsorption capacity of BC. However, the harsh experiment conditions involved in the biochar modification limited the application in industrial level. Herein, we introduced mechanical treatment into BC preparation to reduce the calcination temperature and improve the adsorption capacity simultaneously. The results indicated that the calcination temperature was reduced and the adsorption capacity of the treated BC was improved after mechanochemical treatment. Characterization of the samples disclosed that BCs were graphitized with the particle size reduced to nanoscale after treatment. Adsorption tests indicated that the mechanochemically treated BCs showed much better removal performance of organic contaminants than that of pristine BCs. For instance, among four pristine BCs (BC600, BC700, BC800, and BC900), only BC900 has strong adsorption capacity for MB, while BC600 has low adsorption capacity (1.2 mg/g). By comparison, the adsorption capacity of MB increased greatly to 173.96 mg/g by BC600-500/1 (treated at 500 r/min for 1 hour). To optimize the mechanochemical treatment, the effects of rotation speed and agitation duration were also investigated.     

专家系统在废水生物处理操作和控制中的应用

本文介绍了国外近二十年来专家系统在废水生物处理工艺控制领域的应用及开发的典型系统,分析了废水生物处理工艺难于控制的原因、各类系统的结构和特点及目前废水处理专家系统的不足,探讨了废水生物处理专家系统今后应深入研究的问题及方向     

天津市纪庄子污水处理厂恶臭气体排放研究

2011年,在天津市纪庄子污水处理厂内采集空气样品,并对其中恶臭气体的浓度、扩散模式、影响范围及污水厂内各主要构筑物间相关系数进行了分析研究。结果表明,污水处理厂格栅处恶臭气体浓度最高,为4.31 ng/mL,其中95.61%为H2S气体,其他构筑物恶臭气体浓度范围为0.09～0.32 ng/mL,恶臭气体浓度较前处理工艺相比有大幅度减少;各主要构筑物排放的恶臭气体符合高斯气体扩散模式,恶臭影响范围为厂界外100 m以内;格栅处恶臭气体的排放对于厂界处恶臭气体浓度的贡献度最大,为42.68%;格栅、初沉池、脱水机房、二沉池之间的相关度在90%以上。     

旋流分离器油水分离效率的模拟研究

采用计算流体力学的方法,探讨了操作条件和物料特性对旋流分离器分离油水效率的影响。旋流器为单锥双入口,其主直径为50 mm,锥角为5.5°。模拟过程中,采用商业用软件‘Fluent 6.3’中的雷诺应力模型和欧拉多相流模型来模拟不同条件下油水旋流分离器的分离性能。模拟结果表明,对于本研究的油水旋流分离器,最佳的分流比是10%,最佳的油滴浓度是0.5%(V/V)。在最佳的分流比和油滴浓度下,当进口流速为10.46 m/s时,油水旋流分离器可将15μm的油滴去除80%以上,油滴的分离界限粒径d50(50%的分离效率)为9.2μm。在模拟的基础上,用统计软件STATISTICA6.0对分离效率与操作条件和物料特性之间的关系进行拟合。通过拟合式预测的分离效率与实测值相吻合,误差小于15%。     

膜生物反应器处理微污染水源水的研究与应用现状

膜生物反应器及其组合工艺能实现水源水中微污染物的有效去除,是一种新型高效水处理工艺.总结了膜生物反应器处理微污染水源水的研究与应用现状、污染物去除效果和机制;在分析膜污染机制基础上归纳了膜污染控制和污染膜清洗方式,展望了膜生物反应器在给水领域应用需克服解决的技术难点.     

硝基苯类废水的预处理技术研究

Fe(OH)2对硝基苯具有强烈的还原作用，短时间内可把硝基苯还原为苯胺。催化铁屑法处理硝基苯类废水，除了包括铁屑法处理废水的各种反应外，还能使硝基苯在其表面直接还原，且反应在弱碱性条件下效果较好。m(Fe)：m(Cu)为10：1，pH为9．5，废水硝基苯进水质量浓度为250mg／L，反应时间为30min，硝基苯的去除率达100％。