Spatial and temporal variations and possible sources of dichlorodiphenyltrichloroethane (DDT) and its metabolites in rivers in Tianjin, China

Water, suspended solid (SS) and sediment samples were collected from nine water courses in Tianjin, China and analyzed for dichlorodiphenyltrichloroethane (DDT) and its metabolites (DDXs, including o,p'-,p,p'-DDT, DDD and DDE). The average DDX concentrations in water, SS and sediment were 59+/-30 ng l(-1), 2690+/-1940 ng g(-1)dry wt. and 340+/-930 ng g(-1)dry wt., respectively. Due to the termination of the extensive agricultural application and industrial manufacture, DDXs in river sediment decreased by one order of magnitude since 1970's and low DDT fractions in these sediments were observed. Still, DDXs in the sediments near the outlets of the major manufacturers remained relatively high attributed to the historic input. DDXs in sediment were also positively correlated with organic matter content. Spatial distributions of DDXs in SS and water was different from that in sediment. For SS, a negative correlation between DDX concentration and SS content indicated a dilution effect in many rivers. Dissolved organic carbon content was the major factor affecting DDX concentrations in water phase. Wastewater discharged from dicofol manufacturers and likely illegal agricultural application were the primary reasons causing high DDT (DDE+DDD) ratios in SS and water.     

Distribution of elements in needles of Pinus massoniana (Lamb.) was uneven and affected by needle age

Macronutrients (P, S, K, Na, Mg, Ca), heavy metals (Fe, Zn, Mn, Cu, Pb, Cr, Ni, Cd,) and Al concentrations as well as values of Ca/Al in the tip, middle and base sections, and sheaths of current year and previous year needles of Pinus massoniana from Xiqiao Mountain were analyzed and the distribution patterns of those elements were compared. The results indicated that many elements were unevenly distributed among the different components of needles. Possible deficiency of P, K, Ca, Mn and Al toxicity occurred in needles under air pollution. Heavy metals may threaten the health of Masson pine. Needle sheaths were good places to look for particulate pollutants, in this case including Fe, Cu, Zn, Pb, Cr, Cd and Al.     

Heavy metals in bark of <Emphasis Type="Italic">Pinus massoniana</Emphasis> (Lamb.) as an indicator of atmospheric deposition near a smeltery at Qujiang,China

Goal, Scope and Background Rapid urbanization and the expansion of industrial activities in the past several decades have led to large increases in emissions of pollutants in the Pearl River Delta of south China. Recent reports have suggested that industrial emission is a major factor contributing to the damages in current natural ecosystem in the Delta area. Tree barks have been used successfully to monitor the levels of atmospheric metal deposition in many areas, but rarely in China. This study aimed at determining whether atmospheric heavy metal deposition from a Pb-Zn smeltery at Qujiang, Guangdong province, could be accurately reflected both in the inner bark and the outer bark of Masson pine (Pinus massoniana L.). The impact of the emission from smeltery on the soils beneath the trees and the relationships of the concentrations between the soils and the barks were also analyzed. Methods Barks around the bole of Pinus massoniana from a pine forest near a Pb-Zn smeltery at Qujiang and a reference forest at Dinghushan natural reserve were sampled with a stainless knife at an average height of 1.5 m above the ground. Mosses and lichens on the surface barks were cleaned prior to sampling. The samples were carefully divided into the inner bark (living part) and the outer bark (dead part) in the laboratory, and dried and ground, respectively. After being dry-ashed, the powder of the barks was dissolved in HNO₃. The solutions were analyzed for iron (Fe), manganese (Mn), copper (Cu), zinc (Zn), chromium (Cr), nickel (Ni) and cobalt (Co) by inductively coupled plasmas emission spectrometry (ICP, PS-1000AT, USA) and Cadmium (Cd) and lead (Pb) by graphite furnace atomic absorption spectrometry (GFAAS, ZEENIT 60, Germany). Surface soils (0–10 cm) beneath the sample trees were also collected and analyzed for the selected metals. Results and Discussion Concentrations of the selected metals in soils at Qujiang were far above their environmental background values in the area, except for Fe and Mn, whilst at Dinghushan, they were far below their background values, except for Cd and Co. Levels of the metals, in particular Pb and Zn, in the soils beneath the sample trees at Qujiang were higher than those at Dinghushan with statistical significance. The result suggested that the pine forest soils at Qujiang had a great input of heavy metals from wet and dry atmospheric deposition, with the Pb-Zn smeltery most probably being the source. Levels of Cu, Fe, Mn, Zn, Ni and Pb at Qujiang, both in the inner and the outer bark, were statistically higher than those at Dinghushan. Higher concentrations of Pb, Fe, Zn and Cu may come from the stem-flow of elements leached from the canopy, soil splash on the 1.5 m height and sorption of metals in the mosses and lichens growing on the bark, which were direct or indirect results from the atmospheric deposition. Levels of heavy metals in the outer barks were associated well with the metal concentrations in the soil, reflecting the close relationships between the metal atmospheric deposition and their accumulation in the outer bark of Masson pine. The significant (p<0.01) correlations of Fe-Cu, Fe-Cr, Fe-Pb, Fe-Ni, Pb-Ni, and Pb-Zn in the outer barks at Qujiang again suggested a common source for the metals. The correlation only occurred between Pb and Ni, Cd and Co in the outer barks at Dinghushan, which suggested that those metals must possibly have other uncommon sources. Conclusions Atmospheric deposition of the selected metals was great at Qujiang, based on the levels in the bark of Pinus massoniana and on the concentrations in the soils beneath the trees compared with that at Dinghushan. Bark of Pinus massoniana, especially the outer bark, was an indicator of metal loading at least at the time of sampling. Recommendations and Perspectives The results from this study and the techniques employed constituted a new contribution to the development of biogeochemical methods for environmental monitoring particularly in areas with high frequency of pollution in China. The method would be of value for follow up studies aimed at the assessment of industrial pollution in other areas similar with the Pearl River Delta.     

Source analysis of particulate-phase polycyclic aromatic hydrocarbons in an urban atmosphere of a northern city in China

Particle-associated polycyclic aromatic hydrocarbon (PAH) concentrations were investigated at six sampling sites in the heating (February to March 2001) and nonheating (August to September 2001) periods in an industrial city in Northern China. Thirteen PAHs were measured. The total average concentrations (nanograms per meter cubed) of PAHs ranged between 78.93 and 214.63 during the heating period and from 31.48 to 102.26 in the nonheating period. Benzo(a)pyrene occurred at the highest level at a site near an industrial area but occurred at low concentrations far from the city center and industrial areas. In addition, ambient PAH profiles were studied. The five and six-ring species occurred in high fractions at the sampling site. By diagnostic ratio analysis, the major source at each sampling site in the city was coal combustion in the heating period; in the nonheating period, the major sources were relatively complex. Finally, the similarities among the six regions were assessed by principal component analysis, cluster analysis, and coefficient of divergence. These multivariate statistical analyses produced similar results, which agreed with the results from the diagnostic ratio analysis.     

纳米Al2O3改性PVDF超滤膜处理含油污水研究

在有机高聚物聚偏氟乙烯(PVDF)铸膜液中加入适量无机纳米Al2O3,采用相转化法合成无机改性有机超滤膜.改性PVDF膜的亲水性得到显著改善,进而提高了其通量和抗污染性能.用改性纳米Al2O3-PVDF管式膜装置处理含油污水,出水含油质量浓度0.2mg/L,悬浮固体质量浓度为0.2 mg/L,Toc去除率达98.86%,COD和浊度的去除率均达90%以上,粒径中值小于2 μm.研究表明,改性膜处理含油污水的出水指标均高于未改性膜.用扫描电镜对PVDF膜改性前后的污染情况进行观察和分析,并用不同的洗液对污染膜进行清洗,表明纳米Al2O3的加人明显改善了PVDF膜的抗污染性.用1%OP-10(pH值为10)表面活性剂洗液反冲洗,可使改性膜的通量恢复率达100%.     

“四沿”化工企业污水处理系统安全事故状态下负荷缓冲及安全环境(SE)联锁探讨

在对"四沿"(沿江、沿河、沿湖、沿海)化工行业污水处理方法及流程特点总结的基础上,归纳出应对水力和污染物冲击负荷的缓冲方法。为克服缓冲控制能力有限的缺点,提出一种新方法——SE(安全和环境)联锁,以期达到完善管理、提高控制效果的目的,并详细阐述了该方法在管理及技术层面的实施途径。     

关于“四沿”化工安全的战略性思考与探索

以基本能浓缩中国化工概貌的江苏省沿江、沿河、沿湖、沿海化工企业为背景,依据其形成和发展及基本概况,结合重大化工事故灾难,以安全与环境相耦合,对"四沿"化工安全进行了战略性思考,试图勾画临水化工本质安全的模型,提出在"四沿"地区构建化工本质安全化科技支撑体系的宏观构架,即建设"江苏省四沿区域化工本质安全和化工事故防范及应急系统"的思路、探索与实践。还提出了立法深化研究和技术标准制定、严格区域规划设计与建设的监督、强化监管执法力度等急需关注的问题。以江苏省"四沿"区域的化工安全为背景所提出的思路与对策,应该对整个华东地区乃至全国临水性化工企业安全具有重要的现实和借鉴意义,对我国高危行业的安全生产和环境保护有重大的示范效应。     

基于临水区域化工园区的整体安全研究

针对临水区域化工园区的生产特点及在整体安全方面存在的普遍问题,提出在临水区域化工园区内要进行合理布局,做到功能分区明确;同时需建立园区安全生产管理、监测预警及应急处置系统,主要是由固定危险源和移动危险源动态安全管理子系统、安全生产监测预警系统、突发事故应急处置平台等所组成;坚持安全监控信息化与标准化,对化工园区的整体安全性的提高将发挥巨大的作用,为建设"平安园区"打下坚实的基础。     

水体环境中氟喹诺酮类药物的污染现状及分析方法

阐述了水体环境中的氟喹诺酮类（FQs）药物的来源和污染现状,介绍了FQs在水体环境中的迁移、转化和转归途径,归纳了各种当前使用较多的FQs分析检测方法的功能特点和适用条件。指出今后在FQs分析技术的开发上,应注重提高检测容量、降低检出限和削减环境负面影响因素。     

城市防震减灾能力评估研究

首先论述了目前国内外关于城市地震灾害风险评估的研究,分析了这些研究取得的成果和存在的不足。然后,提出了城市防震减灾能力的概念,采用人员伤亡,经济损失和震后恢复时间作为衡量城市防震减灾能力强弱的3个最基本的要素。围绕这3个基本要素,列举出影响城市防震减灾能力的6大因素,在此基础上,提出了城市防震减灾能力评价指标体系的具体内容。