低浓度二氧化碳检测管的研制

应用活性氧铝—百里香酚酞吸附ＣＯ２线性比长法研制出低浓度ＣＯ２检测管。测定范围０．０５～０．９０％;灵敏度为０．０５％;检测管变色长度与ＣＯ２浓度的相关系数γ＝０．９９８１,精密度与准确度符合国家标准８３ＧＢ７２２０～７２８０。其可靠性与经典的何氏气体分析器比较,结果基本一致。低浓度的ＳＯ２、Ｈ２Ｓ和ＮＨ３对测定无明显干扰,现场监测应用效果可靠,值得推广应用。     

上海世博会供用电系统安全柔性化应急响应机制研究

分析了上海世博会供用电系统的安全保障现状,提出了世博会供用电系统数量柔性与时间柔性参数的度量方法.从制定上海世博会供用电安全保障应急预案、完善输电系统的安全保障措施、构建供用电系统应对突发性安全事故的应急物流体系及相应的应急管理策略等方面提出了具体的方案.     

计算毒理学在内分泌干扰物筛选上的应用和展望

内分泌干扰物通过干扰内分泌系统导致多种疾病,如生殖疾病、肥胖症甚至癌症。然而,面对环境中大量潜在的内分泌干扰物,传统的体外、体内评估方法由于成本高、耗时长等问题,难以实现内分泌干扰物的高通量筛查。计算毒理学逐渐发展成为被美国环保局(Environmental Protection Agency,EPA)、经济合作与发展组织(Organization for Economic Co-operation and Development,OECD)等机构所推荐的内分泌干扰物筛选与预测方法。本文综述了计算毒理学在内分泌干扰物筛选上的进展,主要包括分子对接和分子动力学模拟的应用,并对有害结局路径(adverse outcome pathway,AOP)的方法进行介绍和展望。     

Advanced treatment of wet-spun acrylic fiber manufacturing wastewater using three-dimensional electrochemical oxidation

A three-dimensional electrochemical oxidation(3D-EC) reactor with introduction of activated carbon(AC) as particle micro-electrodes was applied for the advanced treatment of secondary wastewater effluent of a wet-spun acrylic fiber manufacturing plant. Under the optimized conditions(current density of 500 A/m~2, circulation rate of 5 mL/min, AC dosage of 50 g, and chloride concentration of 1.0 g/L), the average removal efficiencies of chemical oxygen demand(COD_(cr)), NH3–N, total organic carbon(TOC), and ultraviolet absorption at 254 nm(UV_(254)) of the 3D-EC reactor were 64.5%, 60.8%, 46.4%, and 64.8%, respectively; while the corresponding effluent concentrations of COD_(cr), NH_3–N, TOC, and UV_(254) were 76.6, 20.1, and42.5 mg/L, and 0.08 Abs/cm, respectively. The effluent concentration of COD_(cr) was less than 100 mg/L, which showed that the treated wastewater satisfied the demand of the integrated wastewater discharge standard(GB 8978-1996). The 3D-EC process remarkably improved the treatment efficiencies with synergistic effects for COD_(cr), NH_3–N, TOC, and UV_(254) during the stable stage of 44.5%, 38.8%, 27.2%, and 10.9%, respectively, as compared with the sum of the efficiencies of a two-dimensional electrochemical oxidation(2D-EC) reactor and an AC adsorption process, which was ascribed to the numerous micro-electrodes of AC in the 3D-EC reactor. Gas chromatography mass spectrometry(GC–MS) analysis revealed that electrochemical treatment did not generate more toxic organics, and it was proved that the increase in acute biotoxicity was caused primarily by the production of free chlorine.     

稠油污水回用锅炉处理工艺的应用

新疆油田公司稠油污水处理普遍采用成熟的离子调整旋流反应水处理技术,污水处理后达到回用锅炉水质标准SY/T 0097-2000《稠油油田采出水用于蒸汽发生器给水处理设计规范》,供给油田专用高压注汽锅炉用水。采用相同技术建成的采油一厂稠油处理站污水回用锅炉处理工艺投用后,处理后污水回用锅炉,减少了含油污水的外排,充分利用了稠油污水的热能,取得了良好的经济和社会效益。     

超细水雾抑制煤燃烧的模拟实验研究

为了研究超细水雾对煤燃烧的抑制效果,基于小尺寸空间抑制燃烧实验平台,研究了超细水雾对煤燃烧的抑制效果,计算在超细水雾作用下实验空间内部氧气、二氧化碳、一氧化碳体积分数的变化情况以及燃烧空间内不同部位的温度变化情况,并且与煤自由燃烧的情况做对比。研究表明超细水雾对煤燃烧的火灾发展过程有很好的抑制作用。研究结论对超细水雾应用于熄灭矿井煤炭火灾具有一定的指导意义     

土石坝管涌溃坝过程数学模型及应用

通过国内外土石坝管涌溃坝模型试验发现,管涌通道断面在溃坝过程中呈现城门洞形,并不断发展扩大直至坝顶发生坍塌。而目前常用的管涌溃坝过程数学模型大多假设管涌通道为圆形或矩形,与实际情况不符。基于土石坝管涌破坏机理,提出一个土石坝管涌溃坝过程数学模型,模型假设初始管涌通道断面为底部正方形顶部半圆形的城门洞形,采用基于水流剪应力的冲蚀公式模拟冲蚀过程管涌通道两侧边向外的发展,采用普罗托季亚科诺夫压力拱理论模拟管涌通道顶拱的发展;通过比较管涌通道上部坝体的重力与管涌通道两侧土体的抗剪强度判断管涌通道的垮塌,分别选择孔流和堰流公式模拟管涌通道坍塌前后的溃口流量;当管涌通道坍塌后,假设坍塌的土体立刻被溃坝水流带走,随后发生漫顶破坏,使用极限平衡法模拟漫顶溃坝过程中的溃口边坡稳定性。模型采用按时间步长迭代的数值计算方法模拟溃口的水土耦合过程,选择国内外25个具有实测资料的土石坝管涌溃坝案例对模型进行验证,比对峰值流量、溃口最终宽度及溃坝历时等参数发现,模型计算结果与实测值的相对误差可满足工程需求,验证了模型的合理性。     

辛置煤矿水力压裂卸压增透影响半径数值模拟研究

随着开采深度的增加,辛置煤矿瓦斯涌出量显著增大。为了提高瓦斯抽采效率,拟采用水力压裂卸压增透技术。理论分析了水力压裂对煤层的卸压增透作用,基于此利用RFPA模拟软件对辛置煤矿2-559回采工作面水力压裂卸压增透进行了数值模拟。研究表明,水力压裂主要在以下3个方面对煤体起到增透作用:使煤体卸压、提高煤层透气性;湿润煤体,增加塑性;改善瓦斯抽放环境。辛置煤矿2-559回采工作面水力压裂所需压力约为15MPa,压裂半径为5-6m,以此可以初步确定现场施工过程中水力压裂钻孔间距以不大于10m为宜。     

Geochemistry of heavy metal-contaminated sediments from the Four River inlets of Dongting lake,China

Environmental Science and Pollution Research - The concentrations of major and trace elements in the sediments from the Four River inlets of Dongting Lake were analysed. The results show that the...