长江中游荆南三口断流时间演变特征及其影响机制

研究河道断流演变特征对认识区域水文过程及人类活动具有重要作用。论文依据1951—2014年水文气候实测数据,运用Mann-Kendall检验法,以及蒸散发-断流天数和降水-径流双累积曲线统计模型等方法分析了长江中游荆南三口断流时间演变特征及其影响机制,结果表明：1）对各时期荆南三口平均断流天数而言,1951—2014年呈逐期増加趋势,且趋势性变化显著,而在2003—2014年间,断流天数虽也增加,但趋势性变化不显著,即增加趋势逐渐减缓;2）影响荆南三口断流天数增减変化的是径流变化过程,而导致径流变化的又是以降水和蒸散发为代表的气候因素和以水利工程、各行业（农业）用水为标志的人类活动;3）影响荆南三口断流天数持续增加的主要驱动因素是人类活动,以各自时段前一时段为基准期,1959—1966、1967—1972、1973—1980、1981—2002、2003—2014年的5个变异期中,气候波动对荆南三口断流天数增加的贡献率依次为24.93%、19.05%、6.36%、10.38%、7.56%;人类活动影响的贡献率分别为75.07%、80.95%、93.64%、89.62%、92.44%。     

Current status of indoor dust PBDE pollution and its physical burden and health effects on children

Environmental Science and Pollution Research - Polybrominated diphenyl ethers (PBDEs) are widely detected in indoor dust, which has been identified as a more important route of PBDE exposure for...     

红色非硫光合细菌的生长特性研究

红色非硫光合细菌菌种从城市污水处理厂活性污泥中分离得到,对红色非硫光合细菌的生长规律及其影响因素进行研究,试验表明在进行污水处理时所用的红色非硫光合细菌的最佳培养条件为接种量2%,pH7～8,光照强度为1500lx,光照厌氧条件下培养3～5d。这为红色非硫光合细菌应用于染料有机化工废水处理的进一步研究提供了理论依据。     

植物篱对土壤养分流失的控制机理研究

植物篱是一种能有效减少地表径流、保土蓄水的水土保持措施,但其控制土壤养分流失相关机理的研究甚少。2001年在长江上游支流吒溪河的二级支流王家桥小流域设立的6个香根草(Vetiveriazizanioides)植物篱试验小区中进行地形测量及采样分析,拟通过局部地形变化、土壤颗粒和养分在小区内的空间分布变化来分析植物篱对紫色土区土壤养分流失的控制机理。坡型测量结果表明,植物篱带前出现泥沙堆积,说明植物篱能有效阻止侵蚀泥沙的向下搬运;机械组成分析结果表明,侵蚀影响下的土壤颗粒粒径在空间上出现分布差异,侵蚀剧烈的局部>0.2mm土壤颗粒明显富集,而植物篱对不同粒径的土壤颗粒的流失均有控制效果,但对粒径较大的颗粒的流失控制效果更明显;全量养分和速效养分含量空间分布的分析结果则表明,植物篱对土壤养分流失具有明显的控制作用。     

青海玉树7.1级地震震害特点分析及启示

根据2010年4月14日玉树7.1级地震震害现场调查资料,对其震害特点进行了全面的分析总结,阐述了震区环境及其地质构造背景,对断层效应及场地效应等也进行了分析,并归纳总结了防震减灾的经验与启示。     

Study on evolution of groundwater-lake system in typical prairie open-pit coal mine area

Environmental Geochemistry and Health - Due to the drought climate and a large amount of groundwater drainage, there are widespread environmental geological problems in prairie open-pit coal mining...     

Novel perspective for urban water resource management: 5R generation

• 5R (Recover, Reduce, Recycle, Resource and Reuse) approaches to manage urban water. • 5R harvests storm water, gray water and black water in several forms. • 5R offers promise for moving solutions for urban water scarcity in practice. Demand for water is expanding with increases in population, particularly in urban areas in developing countries. Additionally, urban water system needs a novel perspective for upgradation with urbanization. This perspective presents a novel 5R approach for managing urban water resources: Recover (storm water), Reduce (toilet flushing water), Recycle (gray water), Resource (black water), and Reuse (advanced-treated wastewater). The 5R generation incorporates the latest ideas for harvesting storm water, gray water, and black water in its several forms. This paper has briefly demonstrated each R of 5R generation for water treatment and reuse. China has the chance to upgrade its urban water systems according to 5R principles. Already, a demonstration project of 5R generation has been installed in Qingdao International Horticultural Exposition, and Dalian International Convention Center (China) has applied 5R, achieving over 70% water saving. The 5R offers promise for moving solutions for urban water scarcity from “hoped for in the future” to “realistic today”.     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.     

Evaluation of the technoeconomic feasibility of electrochemical hydrogen peroxide production for decentralized water treatment

• Gas diffusion electrode (GDE) is a suitable setup for practical water treatment. • Electrochemical H₂O₂ production is an economically competitive technology. • High current efficiency of H₂O₂ production was obtained with GDE at 5–400 mA/cm². • GDE maintained high stability for H₂O₂ production for ~1000 h. • Electro-generation of H₂O₂ enhances ibuprofen removal in an E-peroxone process. This study evaluated the feasibility of electrochemical hydrogen peroxide (H₂O₂) production with gas diffusion electrode (GDE) for decentralized water treatment. Carbon black-polytetrafluoroethylene GDEs were prepared and tested in a continuous flow electrochemical cell for H₂O₂ production from oxygen reduction. Results showed that because of the effective oxygen transfer in GDEs, the electrode maintained high apparent current efficiencies (ACEs,>80%) for H₂O₂ production over a wide current density range of 5–400 mA/cm², and H₂O₂ production rates as high as ~202 mg/h/cm² could be obtained. Long-term stability test showed that the GDE maintained high ACEs (>85%) and low energy consumption (<10 kWh/kg H₂O₂) for H₂O₂ production for 42 d (~1000 h). However, the ACEs then decreased to ~70% in the following 4 days because water flooding of GDE pores considerably impeded oxygen transport at the late stage of the trial. Based on an electrode lifetime of 46 days, the overall cost for H₂O₂ production was estimated to be ~0.88 $/kg H₂O₂, including an electricity cost of 0.61 $/kg and an electrode capital cost of 0.27 $/kg. With a 9 cm² GDE and 40 mA/cm² current density, ~2–4 mg/L of H₂O₂ could be produced on site for the electro-peroxone treatment of a 1.2 m³/d groundwater flow, which considerably enhanced ibuprofen abatement compared with ozonation alone (~43%–59% vs. 7%). These findings suggest that electrochemical H₂O₂ production with GDEs holds great promise for the development of compact treatment technologies for decentralized water treatment at a household and community level.     

鄱阳湖蓝藻分布及其影响因素分析

利用鄱阳湖的原位监测数据,分析鄱阳湖水华蓝藻的分布现状及其影响因素,探索鄱阳湖水华蓝藻的源头.研究结果表明,鄱阳湖浮游植物的优势种为硅藻,蓝藻为鄱阳湖的次级优势种,蓝藻在浮游植物总生物量的比例有逐年增加的趋势.水华蓝藻的主要优势种为鱼腥藻,其次为微囊藻和浮游蓝丝藻. 鄱阳湖蓝藻水华形成初期的基本规律为水华蓝藻在营养盐浓度相对较高且水流较缓的内湾及尾闾区生长分布,在夏秋季水位较高时在水流和风的作用下向主航道输移聚集. 结合鄱阳湖水文特点,主航道的水华蓝藻聚集有可能是上游四个湖区的蓝藻向下游漂移综合作用的结果.研究成果可为控制鄱阳蓝藻水华区域风险灾害提供基础数据.