Effect of dilution rate on dynamic and steady-state biofilm characteristics during phenol biodegradation by immobilized Pseudomonas desmolyticum cells in a pulsed plate bioreactor

Continuous pulsed plate bioreactor (PPBR) was used for phenol biodegradation. Pseudomonas desmolyticum cells immobilized on granular activated carbon was used. Dynamic and steady state biofilm characteristics depend on dilution rate (DR). Lower DR favour phenol degradation and uniform, thick biofilm formation. Exo polymeric substance production in biofilm are favoured at lower dilution rates. Pulsed plate bioreactor (PPBR) is a biofilm reactor which has been proven to be very efficient in phenol biodegradation. The present paper reports the studies on the effect of dilution rate on the physical, chemical and morphological characteristics of biofilms formed by the cells of Pseudomonas desmolyticum on granular activated carbon (GAC) in PPBR during biodegradation of phenol. The percentage degradation of phenol decreased from 99% to 73% with an increase in dilution rate from 0.33 h?1 to 0.99 h?1 showing that residence time in the reactor governs the phenol removal efficiency rather than the external mass transfer limitations. Lower dilution rates favor higher production of biomass, extracellular polymeric substances (EPS) as well as the protein, carbohydrate and humic substances content of EPS. Increase in dilution rate leads to decrease in biofilm thickness, biofilm dry density, and attached dry biomass, transforming the biofilm from dense, smooth compact structure to a rough and patchy structure. Thus, the performance of PPBR in terms of dynamic and steady-state biofilm characteristics associated with phenol biodegradation is a strong function of dilution rate. Operation of PPBR at lower dilution rates is recommended for continuous biologic treatment of wastewaters for phenol removal.     

Spectrophotometric determination of platinum(IV) in alloys, complexes, environmental, and pharmaceutical samples using 4-[N,N-(diethyl)amino] benzaldehyde thiosemicarbazone

4-[N,N-(Diethyl)amino] benzaldehyde thiosemicarbazone (DEABT) is proposed as an analytical reagent for the spectrophotometric determination of platinum(IV). The DEABT forms 1:2 yellow complex with Pt(IV), which is sparingly soluble in water and completely soluble in water–ethanol–DMF medium. The Pt(IV)–DEABT complex shows maximum absorbance at 405 nm. Beer’s law is valid up to 7.80 μg cm^???3, and optimum concentration range for the determination of platinum(IV) is 0.48–7.02 μg cm^???3. The molar absorptivity and Sandell’s sensitivity of the method are found to be 1.755 × 10⁴ dm³ mol^???1 cm^???1 and 0.0012 μg cm^???2, respectively. The relative error and coefficient of variation (n?=?6) for the method does not exceed ±0.43% and 0.35%, respectively. Since the method tolerates a number of metal ions commonly associated with platinum, it can be employed for the determination of platinum in environmental samples, pharmaceutical samples, alloys, catalysts, and complexes. The method is rapid as the Pt(IV)–DEABT complex is soluble in water–ethanol–DMF medium and not requiring any time consuming extraction method for the complex.     

Microbial disinfection of water with endotoxin degradation by photocatalysis using Ag@TiO2 core shell nanoparticles

Environmental Science and Pollution Research - The studies on photocatalytic disinfection of water contaminated with Escherichia coli using Ag core and TiO2 shell (Ag@TiO2) nanoparticles under UV...     

Solar photocatalysis for treatment of Acid Yellow-17 (AY-17) dye contaminated water using Ag@TiO2 core–shell structured nanoparticles

Wastewater released from textile industries causes water pollution, and it needs to be treated before discharge to the environment by cost effective technologies. Solar photocatalysis is a promising technology for the treatment of dye wastewater. The Ag@TiO₂ nanoparticles comprising of Ag core and TiO₂ shell (Ag@TiO₂) have unique photocatalytic property of inhibition of electron–hole recombination and visible light absorption, which makes it a promising photocatalyst for use in solar photocatalysis and with higher photocatalytic rate. Therefore, in the present work, the Ag@TiO₂ nanoparticles synthesized by one pot method with postcalcination step has been used for the degradation of Acid Yellow-17 (AY-17) dye under solar light irradiation. The Ag@TiO₂ nanoparticles were characterized using thermogravimetric–differential thermal analysis, X-ray diffraction, transmission electron microscopy, selected area electron diffraction, and energy dispersive X-ray analysis. The catalyst has been found to be very effective in solar photocatalysis of AY-17, as compared to other catalysts. The effects of pH, catalyst loading, initial dye concentration, and oxidants on photocatalysis were also studied. The optimized parameters for degradation of AY-17 using Ag@TiO₂ were found to be pH?3, dye/catalyst ratio of 1:10 (g/g), and 2 g/L of (NH₄)₂S₂O₈ as oxidant. Efficient decolorization and mineralization of AY-17 was achieved. The kinetics of color, total organic carbon, and chemical oxygen demand removal followed the Langmuir–Hinshelwood model. Ag@TiO₂ catalyst can be reused thrice without much decline in efficiency. The catalyst exhibited its potential as economic photocatalyst for treatment of dye wastewater.     

Auto-combustion synthesis of narrow band-gap bismuth ferrite nanoparticles for solar photocatalysis to remediate azo dye containing water

Environmental Science and Pollution Research - Narrow band gap of ferrites makes it a good photocatalyst, and it plays very prominent role in the level of degradation of organic dyes by...     

Effects of mycorrhizae and other soil microbes on revegetation of heavy metal contaminated mine spoil

The effects of mycorrhizal fungi and other soil microorganisms on growth of two grasses, Andropogon gerardii Vitm. and Festuca arundinacea Schreb., in heavy metal-contaminated soil and mine tailings were investigated. A. gerardii is highly dependent on mycorrhizal fungi in native prairie, while F. arundinacea is a facultative mycotroph and relies on mycorrhizal symbiosis only in extremely infertile soils. Regardless of microbial amendments, neither plant species was able to establish and grow in the mine tailings. Both plant species grew in the moderately contaminated or non-contaminated soils, although A. gerardii grew in these soils only when mycorrhizal. Other soil microbes significantly improved growth of A. gerardii only in uncontaminated soil, but to a lesser extent than mycorrhizae. Although F. arundinacea was more highly colonized by mycorrhizal fungi than A. gerardii, neither microbial amendment affected growth of fescue in any soil. In several treatments mycorrhizal fungi adapted to uncontaminated soil stimulated plant growth more than mycorrhizae adapted to the moderately contaminated soil. However, mycorrhizal fungi adapted to contaminated soil did not increase the productivity of plant growth in contaminated soil more than fungi adapted to uncontaminated soil. A. gerardii plants inoculated with mycorrhizal fungi retained more Zn in roots than in shoots, confirming earlier reports that mycorrhizal fungi alter the translocation pattern of heavy metals in host plants. In contrast, mycorrhizae did not affect translocation patterns in F. arundinaceae, suggesting that the mycorrhizal dependence of a plant species is correlated with the retention of metals in roots. The correlation between mycorrhizal dependence of a plant species and mycorrhizal alteration of translocation pattern may also explain the inconsistent reports of mycorrhizal effects on translocation of heavy metals in plants. Plant response to mycorrhizal symbiosis may therefore provide a useful criterion for the selection of the plant species to be used in revegetation of contaminated sites.     

The sonographic diagnosis of chorionicity

The differentiation between mono- and dichorionic placentation in twin pregnancies is of clinical importance because of the significant difference in perinatal morbidity and mortality between the two, and the increased surveillance indicated in monochorionic gestations. Application of ultrasonography has enabled very precise prenatal determination of chorionicity. While this is best performed in the first trimester when accuracy approaches 100%, even in the third trimester, using a composite cascade of available sonographic features, accuracy has been reported to approach 97%. While two clearly separate placentae or discordant fetal gender conform to dichorionicity, in most twin pregnancies other features need to be assessed to determine chorionicity. The presence of the ‘lambda’ or the ‘T’ sign in the presence of a single placenta, best determined in the first trimester, is the most reliable indicator of chorionicity, with measurements of the inter-twin membrane thickness and counting of the membrane layers being less reliable. In this article, we review the sonographic features that help in the accurate depiction of chorionicity. Copyright © 2005 John Wiley & Sons, Ltd.     

Remediation of a Former Dry Cleaner Using Nanoscale Zero Valent Iron

Nanoscale zero valent iron (nZVI) was evaluated in a laboratory treatability study and subsequently injected as an interim measure to treat source area groundwater impacts beneath a former dry cleaner located in Chapel Hill, North Carolina (the site). Dry cleaning operations resulted in releases of tetrachloroethene (PCE) that impacted site soil at concentrations up to 2,700 mg/kg and shallow groundwater at concentrations up to 41 mg/L. To achieve a design loading rate of 0.001 kg of iron per kilogram of aquifer material, approximately 725 kg of NanoFe? (PARS Environmental) was injected over a two‐week period into a saprolite and partially weather rock aquifer. Strong reducing conditions were established with oxidation–reduction potential (ORP) values below –728 mV. pH levels remained greater than 8 standard units for a period of 12 months. Injections resulted in near elimination of PCE within one month. cis‐1,2‐Dichloroethene accumulated at high concentrations (greater than 65 mg/L) for 12 months. MAROS software (Version 2.2; AFCEE, 2006 ) was used to calculate mass reduction of PCE and total ethenes at 96 percent and 58 percent, respectively, compared to baseline conditions. Detections of acetylene confirmed the presence of the beta‐elimination pathway. Detections of ethene confirmed complete dechlorination of PCE. Based on hydrogen gas generation, iron reactivity lasted 15 months. © 2013 Wiley Periodicals, Inc.     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well. Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO2 pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.