自反应性化学物质的热危险性评价方法

笔者进行的研究工作 ,给出了利用C80微量量热仪所测得的自反应性化学物质的热流速曲线 ,从而求解该物质的化学反应动力学参数 ,以及在Semenov模型下求解其自加速分解温度SADT(Self AcceleratingDecompositionTemperature)的方法 ,并将一些有机过氧化物、氧化剂和可燃剂的混合物的自加速分解温度的推算结果与实测值进行了比较。实验证明 ,该推算方法结论准确 ,是一种安全、简便、实用的反应性化学物质热危险性的评价方法     

Cu Ni As Cr对萝卜出苗的影响

利用盆栽试验研究Ｃｕ、Ｎｉ、Ａｓ、Ｃｒ４个元素不同浓度对萝卜出苗的影响．结果表明，土壤含Ｃｕ５０ｍｇ／ｋｇ以上时，随着含Ｃｕ量的增加，出苗数随之减少．在酸性土壤上发生Ｃｕ和Ｎｉ危害时，可用提高土壤ｐＨ至中性的办法来消除．在中性土壤上，含Ｎｉ５０ｍｇ／ｋｇ以上对萝卜出苗有害．Ｃｕ、Ｎｉ复合污染比单一元素污染的危害大，且毒性Ｎｉ＞Ｃｕ．土壤Ｃｒ、Ａｓ含量越大，对萝卜出苗的危害也越大，并且毒性Ｃｒ（６＋）＞Ｃｒ（３＋）．     

火灾定量预测方法研究

应用预测学原理，对火灾定量预测方法进行了探讨，建立了一套适应不同火灾历史统计特点的平滑预测模型：滑动平均预测模型和指数平滑预测模型；考虑火灾事故的季节性变化，建立了季节性平滑预测模型。应用二重指数平滑预测模型和季节性平滑预测模型，对荆州地区１９９３￣１９９４年的火灾统计资料进行分析和预测，结果表明该地区今后的火灾发生呈上升趋势，提请有关部门注意防火安全。     

论青少年环境教育

本文从环境教育是环境保护的根本性战略措施和环境教育应从青少年抓起的总体思路出发,根据教育规律和青少年特点,全面论述了青少年环境教育的目的、形式、原则、方法和评估,系统地提出了开展青少年环境教育的总体休构想。     

闽北地区“6.22”特大山体滑坡及其治理对策

１９９８年６月２２日,闽北地区出现百年一遇的特大洪水,从而引发了政和县境里发生特大山体滑坡。本文就此次灾害的灾情、发生条件进行了分析;并对如何识别地质灾害及如何防治滑坡灾害作了进一步分析。     

轻质隔爆材料的实验研究

对数十种材料的隔爆性能进行了研究。用上下法分别求出不同材料的雷管径向殉爆以及轴向殉爆的半爆距离Ｌ５０。针对材料密度小，隔爆效果好的要求，定义了一个既考虑材料密度又考虑其隔爆性能的优化参数，并以此作为判据，对实验材料进行了优选     

锌冶炼烟尘中铅汞分布及形态研究

锌精矿脱硫焙烧烟气降温过程中,烟尘的性质及其中铅汞存在形态的变化规律是冶炼烟气重金属(Pb和Hg)污染控制的重要依据。通过电感耦合等离子体-原子发射光谱(ICP-AES)、激光粒度分析及筛分分析了不同降温收尘环节烟尘元素成分及粒度变化。烟尘主要含Zn、Fe、Ca、Cd、S、Pb元素,其累积质量分数达69.90%~77.62%,而Hg含量较低。烟尘粒径随烟气温度降低呈先增大后减小的变化规律,中位径由沸腾焙烧炉排出的28μm升至经余热锅炉降温后的36μm,再逐级降至经电收尘器后的5.6μm。据此,重点分析了Pb和Hg在烟气中的分布,并借助X射线光电子能谱(XPS)分析了其存在形态。结果表明,随烟气温度降低,烟气中Pb和Hg含量呈上升趋势,Pb由2.8%增至9.2%,Hg由4.8μg/g增至109.1μg/g。不同工艺环节的烟尘中Pb均以PbSO_4和含Pb—O键的复杂Pb配合物的形式存在。Hg变化较为明显,仅沸腾焙烧炉烟尘样品中能够检测到HgS与HgSO_4,其余工艺环节烟尘样品中无含Hg化合物的特征峰。     

Human bronchial epithelial cell injuries induced by fine particulate matter from sandstorm and non-sandstorm periods: Association with particle constituents

Epidemiological studies have demonstrated the exacerbation of respiratory diseases following sandstorm-derived particulate matter(PM) exposure.The presence of anthropogenic and biological agents on the sandstorm PM and the escalation of PM 2.5 μm(PM2.5)pollution in China have led to serious concerns regarding the health effects of PM2.5during Asian sandstorms.We investigated how changes in PM2.5composition,as the weather transitioned towards a sandstorm,affected human airway epithelial cells.Six PM2.5samples covering two sandstorm events and their respective background and transition periods were collected in Baotou,an industrial city near the Gobi Desert in China.PM samples from all three periods had mild cytotoxicity in human bronchial epithelial cell line BEAS-2B,which was positively correlated with the contents of polycyclic aromatic hydrocarbons and several metals.All PM samples potently increased the release of interleukin-6(IL-6) and interleukin-8(IL-8).Endotoxin in all samples contributed significantly to the IL-6 response,with only a minor effect on IL-8.Cr was positively correlated with both IL-6 and IL-8 release,while Si was only associated with the increase of IL-6.Our study suggests that local agricultural and industrial surroundings in addition to the sandstorm play important roles in the respiratory effects of sandstorm-derived PM.     

Thermal energy storage and thermodynamic properties of (E)-3-m-tolylbut-2-enoic acid as a medium temperature phase change material

Phase change materials (PCMs) that can store and release heat energy over the temperature range from 363 to 393 K are crucial for solar absorption cooling, and it is worthy to seek new solid-liquid PCMs candidates that melt and crystallize in this temperature range. In this paper, (E)-3-m-tolylbut-2-enoic acid (mTBEA) was applied as a PCM candidate. Its thermal energy storage properties and thermal stability were systematically investigated. The results showed that mTBEA melted at 382.9 ± 0.5 K and crystallized at about 364 K, with a melting enthalpy (Δ_fusH) of 138.4 ± 6.9 J g^?1 and showed good long-term cyclic stability and thermal stability. The supercooling of mTBEA was stabilized at about 20 K, indicating that the conservation condition of melted mTBEA could be simple. In addition, the melted mTBEA could release all the absorbed thermal energy upon crystallizing. Besides, mTBEA exhibited good thermal stability for it to be applied as PCM. Hence, mTBEA is a promising PCM candidate for solar absorption cooling. Furthermore, the heat capacity of mTBEA was measured by modulated temperature differential scanning calorimetry (MTDSC) over the temperature range from 198.15 to 431.15 K, and the molar thermodynamic functions, [H_T-H_298.15]_m and [S_T-S_298.15]_m, were calculated based on the fitted molar heat capacity data.