农药污染地下水的微生物治理及含水层渗透性变化研究

采用了从农药厂阿特拉津生产车间排污口污泥中分离出的菌种AT菌 ,进行了农药阿特拉津污染地下水微生物治理的模拟实验研究 ,在实验条件 (T =10℃ ,pH =7.5 )与野外含水层的条件基本一致情况下 ,难于生物降解的污染质阿特拉津的一次投菌降解率可达 3 1.0 8% ;设计了两种有效细菌的投放方式以模拟野外条件下的菌种投加条件。另外 ,AT菌的作用会造成被治理含水层的渗透性能降低 ,两种投菌方式下 ,实验后含水层的渗透系数分别下降 60 .5 4%和 3 4 5 6%。清水冲洗 10d的渗透性恢复率分别为 48.96%及 81.3 6% ,说明清水渗透恢复的方法效果明显     

荧光化学传感器的制备及其在环境分析监测中的应用

随着荧光分析技术和传感技术的发展,荧光化学传感器已经成为一种重要的连续分析测量装置.它具有很高的选择性和灵敏度,可以实现对pH、溶解氧、含氮化合物、有毒害重金属离子、有机污染物进行实时和在线测定,因此在环境分析监测方面具有广泛的应用前景.简要介绍了荧光化学传感器的原理、制备及分类,综述了近年来荧光化学传感器的发展及其在环境分析监测中的最新研究成果,并探讨了荧光化学传感器在环境分析监测领域的应用前景和发展方向.     

污水土壤含水层处理系统原理、管理、效率和应用

论述了污水土壤含水层处理系统中的地球化学过程.该系统通过对污染物的机械过滤、生物化学转化和降解过程、吸附/解吸过程、氧化/还原过程、沉淀/溶解过程、以及矿物的合成过程净化污水.运作周期通常为1～2 d灌水/4～5 d排干,年水力负荷变化于15～100 m之间,应根据季节变化调整水力负荷.该系统能有效去除污水中的微生物和悬浮物,降低COD和BOD含量,和去除潜在的有毒的无机成分,如重金属和含氧阴离子.作为一种低投资、低能耗、高净化效率、运行简单的自然的污水处理技术,其在世界各国得到了广泛应用.我国部分地区水资源极其短缺,在土壤和气候条件适合的地区,应用土壤含水层处理技术处理污水,实现污水资源化,既解决了污水污染环境问题,又将在一定程度上缓解该地区的水资源短缺问题,对于经济与环境的协调发展具有重要意义.     

臭氧-曝气生物滤池处理酸性玫瑰红染料废水

在实验室配制含酸性玫瑰红染料的印染废水，采用臭氧氧化-曝气生物滤池工艺开展处理试验。试验运行结果表明，臭氧氧化处理能提高模拟废水的可生化性，BOD／COD值由原水的0．18上升到0．36。经组合工艺处理后出水COD〈40mg／L，色度40倍以下，SS约50mg／L，处理效果良好。     

Fate of polycyclic aromatic hydrocarbons during vitrification of incinerator ash in a coke bed furnace

Fate of polycyclic aromatic hydrocarbons (PAHs) during the vitrification of fly ash and bottom ash from the municipal waste incinerator in a coke bed furnace was investigated. In this system, both coke and lime were added to enhance the melting reaction. The major PAH sources in this system were ash and coke, which respectively contributed 97% and 3% of PAHs in the input-mass. During vitrification process, low molecular PAHs (LM-PAH, 2-3-ring), median molecular PAHs (MM-PAH, 4-ring) and high molecular PAHs (HM-PAH, 5-7-ring) mass respectively accounted for >99%, >99% and 84% of the output-mass emitted as the stack flue gas; while those discharged from the slag were <1%, <1% and 16%, respectively. The O/I (output-mass/input-mass) ratio of LM-, MM- and HM-PAHs were 0.063, 0.002 and <0.001, respectively. The high distribution in flue gas and O/I ratio of LM-PAHs is reasonable since they are more easily evaporated, hence difficult to be removed by air pollution control devices. On the contrary, the HM-PAHs, having lower vapor pressure, primarily stays mainly in slag. Based on the 21 total PAH content in feeding ash and slag, the reduction efficiency of the coke bed furnace was >99.9%. To minimize the risk of secondary pollution, the efficiency of coke bed furnace should be improved to reduce the PAH emission into ambient air.     

Quantification of joint effect for hydrogen bond and development of QSARs for predicting mixture toxicity

A QSAR model is successfully proposed to predict the toxicity effect on Photobacterium phosphoreum by nonpolar-narcotic-chemical mixtures and/or polar-narcotic-chemical mixtures. For nonpolar-narcotic-chemical mixtures and polar-narcotic-chemical mixtures, their corresponding hydrophobicity-based QSAR models are derived from regression analysis. Comparison of these two QSAR models make us believe that it is the joint effect of hydrogen bond in polar-narcotic-chemical mixture that leads to the difference between these two models. Such joint effect of hydrogen bond can be quantified as AMH and BMH by using the different partition coefficients of mixtures in various organic phase/water systems. And the regression analysis results convinced us that the introduction of AMH does improve the quality of the QSAR model with r2=0.948, S.E.=0.166 and F=745.201 at P=0.000 for total 84 mixtures.     

Wet air oxidation of a reactive dye solution using CoAlPO(4)-5 and CeO(2) catalysts

Wet air oxidation of a prepared reactive dye solution was performed to assess the efficacy of CoAlPO(4)-5 and CeO(2) as catalysts in the reaction. Via adsorption and oxidation of dye, CoAlPO(4)-5 effectively decreased American Dye Manufacturers Institute and chemical oxygen demand (COD) values in the dye solution. At a reaction temperature of 135 degrees C and an applied pressure of 1.0 MPa, color and COD removal were as high as 95% and 90%, respectively, after 2 h. Active sites on the outer surface of CoAlPO(4)-5 are responsible for adsorption and decomposition of dye while active sites in the pores dominate further destruction and oxidation of intermediate products. Since the outer surface only represents a minor part of the total surface, the color removal does not increase appreciably with loading of CoAlPO(4)-5. The CeO(2) catalyst, calcined from cerium chloride under high thermal impact (type A CeO(2)) was very effective in removing color and COD from the solution. This catalyst demonstrated near 100% color removal at temperatures above 135 degrees C and the COD removal could be above 95% at 165 degrees C. With both CoAlPO(4)-5 and CeO(2) catalysts, COD rose and then fell back during the reaction, a feature typical of a consecutive reaction. In contrast to prepared CeO(2), a commercial CeO(2) did not exhibit any catalytic ability for the removal of color and COD. The durability of both CoAlPO(4)-5 and prepared CeO(2) is considered to be fair.     

黄磷废水处理技术

黄磷废水成分复杂,含P4、F-和CN-等多种有毒有害物质,污染严重,须经过处理达标后方可排放.目前国内黄磷废水处理通常采用物化法,其又可分为沉淀氧化法和闭路循环法.分别就这2种技术方法的处理过程及优缺点进行了探讨,并对其存在问题的解决提供了思路.     

Control of NOx emissions by air staging in small- and medium-scale biomass pellet boilers

Environmental Science and Pollution Research - The effect of air staging strategies on NOx control was investigated on a 210-kW small-scale biomass boiler (SBB) and a 1.4-MW medium-scale biomass...     

The associations of air pollution exposure during pregnancy with fetal growth and anthropometric measurements at birth: a systematic review and meta-analysis

Environmental Science and Pollution Research - Fetal growth has been demonstrated to be an important predictor of perinatal and postnatal health. Although the effects of maternal exposure to air...