Response of microcystis to copper stress: do phenotypes of microcystis make a difference in stress tolerance?

To elucidate the role of phenotype in stress-tolerant bloom-forming cyanobacterium Microcystis, two phenotypes of M. aeruginosa - unicellular and colonial strains were selected to investigate how they responded to copper stress. Flow cytometry (FCM) examination indicated that the percents of viable cells in unicellular and colonial Microcystis were 1.92-2.83% and 72.3-97.51%, respectively, under 0.25 mgl(-1) copper sulfate treatment for 24h. Upon exposure to 0.25 mgl(-1) copper sulfate, the activities of antioxidative enzyme, such as superoxide dismutase (SOD) and catalase (CAT), were significantly increased in colonial Microcystis compared to unicellular Microcystis. Meanwhile, the values of the photosynthetic parameters (F(v)/F(m), ETR(max), and oxygen evolution rate) decreased more rapidly in unicellular Microcystis than in colonial Microcystis. The results indicate that colonial Microcystis has a higher endurance to copper than unicellular Microcystis. This suggests that the efficient treatment concentration of copper sulfate as algaecides will be dependent on the phenotypes of Microcystis.     

Effect of amorphous silica and silica sand on removal of chromium(VI) by zero-valent iron

The effect of two surfaces (amorphous silica and silica sand) on the reduction of chromium(VI) by zero-valent iron (Fe(0)) was investigated using batch reactors. The amendment of both surfaces significantly increased the rate and extent of Cr(VI) removal. The rate enhancement by amended surfaces is presumed to result from scavenging of Fe(0)-Cr(VI) reaction products by the provided surfaces, which minimized surface deactivation of Fe(0). The rate enhancing effect was greater for silica compared to sand, and the difference is attributed to silica's higher surface area, greater affinity for reaction products and pH buffering effect. For a given mass of Fe(0), the reactivity and longevity of Fe(0) to treat Cr(VI) increased with increasing dose of silica. Elemental analyses of the reacted iron and silica revealed that chromium removed from the solution was associated with both surfaces, with its mass distribution being approximately 1:1 per mass of iron and silica. The overall result suggests reductive precipitation was a predominant Cr(VI) removal pathway, which involves initial reduction of Cr(VI) to Cr(III), followed by formation of Cr(III)/Fe(III) hydroxides precipitates.     

生物修复剂在清除海滩石油污染中的应用

介绍了生物修复石油污染海滩时常用的修复剂类型及其特点.当实验室环境条件能较好控制时,生物强化剂一般是有效的;然而污染现场得出的证据不能表明其对生物降解有促进作用.实验室和现场的研究均表明营养型生物促进剂能有效促进石油的生物降解.水溶性营养易被波浪和潮汐冲刷掉;缓释型营养盐面临的主要挑战是如何控制其释放速率,以保证孔隙水中能较长时间维持理想的营养浓度;亲油型肥料中含有有机碳,有可能在微生物降解石油之前被优先降解.建议根据污染环境的特点选用适合的生物促进剂.     

知识生产视角下应急管理学科建设的使命与路径

为厘清应急管理学科建设机制、推进应急管理学科良性发展,通过回顾学科建设历史,来分析应急管理学科建设面临的困境与肩负的使命,并提出相应的建设路径.研究表明:在知识生产模式转型视角下,应急管理学科建设面临知识生产者离散、知识创新度不足、知识转化率有限的三重困境,需要完成"朝向人才培养的应急管理知识直接再生产""朝向科学研究...     

环境检测的作用及环保措施分析

本文对环境检测的作用进行了总结,包括环境检测是环境影响评价的基础、环境检测是环境保护的依据、环境检测促进环境管理工作等,提出了环境保护措施,需要增加资金投入力度、完善环境检测法律保障体系、合理使用环境检测新技术、构建环境检测质量控制体系、完善环境监管保护方法来有效地保护环境,提升人们的生活质量。     

典型三床RTO设备燃爆危险性数值模拟研究*

为研究苯、甲苯、二甲苯混合废气在三床蓄热式废气焚烧炉内部的燃烧过程,基于FLUENT软件建立典型的三床蓄热式废气焚烧炉的物理模型和数值模型,重点分析进气风量和混合可燃气体-空气摩尔占比对其内部压力变化规律的影响,以期可为其安全设计提供借鉴。研究结果表明:燃烧室内的温度变化与燃烧速度变化保持一致,可通过监测RTO燃烧室内的温度来定性评估气体燃烧速度,随着进气风量的增加,混合废气燃烧速度先升高后下降后再升高;从能源损耗和安全生产2个方面综合考虑,得出RTO运行的最佳进气风量为15 000 m3/h到30 000 m3/h,最佳的混合可燃气体-空气摩尔占比为0.15~0.2,这与RTO实际工况相符合,解释RTO装置内废气积聚导致爆炸事故的原因,燃烧过程中压力出现2次峰值超压,实际生产中需在2个时间节点多加防范。     

江苏省沿江地区饮用水系统适应能力评估

在对饮用水系统适应能力界定的基础上,基于水源地、供水系统、用水系统、排污处理系统和社会系统等环节的适应性要素构建沿江城市饮用水系统适应能力评价指标体系和评价模型,并据此对江苏省沿江地区城市饮用水系统适应能力分异特征、类型及影响因素进行深入探讨。结果表明：长江南岸地区饮用水系统适应能力高于江北地区;从各子系统适应能力得分情况来看,需加大省辖市水源地的保护力度,合理规划港口、码头等的布设;加快江北地区供排基础设施的建设;培养经济发达地区的节水意识;提高全区的技术水平     

The cycle characteristics of Haloxylon ammodendron pattern and topography at multi-scales in Gurbantunggut Desert, China

We employed ecologically using Mexh and Mori wavelet methods to analyze the cycle phenomena and their maintaining mechanisms of the Haloxylon ammodendron distribution in complex longitudinal sand ridges (CLSRS). The results showed that ecologically using wavelet can distinguish H. ammodendron distributed in parallel-shaped, lattice-shaped and fork-shaped dunes with a dominant cycle of 165–180 m, 100–110 m and 70–80 m, respectively. Besides the dominant cycle, ecologically using Mori wavelet also showed 2–3 minor small peaks on different scales. The mechanisms to maintain the cycles at multi-scales of H. ammodendron relies on the seed spread, interference intensity in different topography and soil properties. The formations, configurations and presences of the three types of dunes should have some direct relations with the wind fields of the areas where the patterns are located, and also with the ground surface conditions. If the distribution pattern is periodic, meanwhile the abrupt change points are significant; we can predict the H. ammodendron distribution pattern in a certain area.     

Multi-objective Programming and Social Welfare Analysis of Rural–urban Land Conversion Decision-making

Abstract

Rural–urban land conversion is an inevitable phenomenon in urbanization and industrialization. And the decision-making issue about this conversion is multi-objective because the social decision maker (the whole of central government and local authority) has to integrate the requirements of different interest groups (rural collective economic organizations, peasants, urban land users and the ones affected indirectly) and harmonize the sub-objects (economic, social and ecological outcomes) of this land allocation process. This paper established a multi-objective programming model for rural–urban land conversion decision-making and made some social welfare analysis correspondingly. Result shows that the general object of rural–urban land conversion decision-making is to reach the optimal level of social welfare in a certain state of resources allocation, while the preference of social decision makers and the value judgment of interest groups are two crucial factors which determine the realization of the rural–urban land conversion decision-making objects.     

Green and compatible industrial development in Western China

Western China has lagged a lot in terms of industrial structure and economic development,compared with the national average.And China announced its target of CO_2 emission reduction,i.e.by 2020,CO_2 emission per GDP will drop by40-45%compared with 2005.The target will be incorporated into China's long-term industrial planning.Against this background,this paper will make a comprehensive examination of the industrial development of Western China,aiming to discover a green and compatible way.First,we analyze the spatiotemporal evolution of regional industrial structure for the period 2000-2010.Second,we try to discover the industrial structure optimization path for Western China by employing the Vector Auto Regression model.Lastly,we try to provide some advice and suggestions for further industrial development in Western China.Our examination shows that further industrial development in Western China should pay full attention to resource conservation and recycling,and develop on a green and compatible path.