Measurement of gas-phase total peroxides at the summit of Mount Tai in China

Measurement of ambient gas-phase total peroxides was performed at the summit of Mount Tai (Mt. Tai, 1534 m above sea level) in central-eastern China during March 22–April 24 and June 16–July 20, 2007. The hourly averaged concentration of peroxides was 0.17 ppbv (± 0.16 ppbv, maximum: 1.28 ppbv) and 0.55 ppbv (± 0.67 ppbv, maximum: 3.55 ppbv) in the spring and summer campaigns, respectively. The average concentration of peroxides at Mt. Tai, which is in a heavily polluted region, was much lower than hydrogen peroxide measurements made at some rural mountain sites, suggesting that significant removal processes took place in this region. An examination of diurnal variation and a correlation analysis suggest that these removal processes could include chemical suppression of peroxide production due to the scavenging of peroxy and hydroxy radicals by high NO_x, wet removal by clouds/fogs rich in dissolved sulfur dioxide which reacts quickly with peroxides, and photolysis. These sinks competed with photochemical sources of peroxides, resulting in different mean concentrations and diurnal pattern of peroxides in the spring and summer. A principal component analysis was conducted to quantify the major processes that influenced the variation of peroxide concentrations. This analysis shows that in the spring photochemical production was an important source of peroxides, and the major sink was scavenging during upslope transport of polluted and humid air from the lower part of the planetary boundary layer (PBL) and wet removal by synoptic scale clouds. During the summer, highly polluted PBL air (with high NO_x) was often associated with very low peroxides due to the chemical suppression of HO₂ by high NO_x and wet-removal by clouds/fogs in this sulfur-rich atmosphere, especially during the daytime. Higher concentrations of peroxides, which often appeared at mid-nighttime, were mainly associated with subsidence of air masses containing relatively lower concentrations of NO_y.     

Study on a new correlation between diffusion coefficient and temperature in porous building materials

The diffusion coefficient (D) and partition coefficient (K_ma) are the two important parameters used to predict the volatile organic compound (VOC) emission or sorption characteristics in porous building materials. D and K_ma may be strongly affected by temperature (T). In this study, we derived a new correlation between D and T based on the assumption that molecular diffusion is dominant, and evaluated this correlation using a series of existing experimental data. The modeling results using the new correlation agree well with the experimental data. The correlation would be useful for assessment of indoor air quality under different environmental (temperature) conditions.     

Influence of titanium dioxide nanoparticles on speciation and bioavailability of arsenite

In this study, the influence of the co-existence of TiO₂ nanoparticles on the speciation of arsenite [As(III)] was studied by observing its adsorption and valence changing. Moreover, the influence of TiO₂ nanoparticles on the bioavailability of As(III) was examined by bioaccumulation test using carp (Cyprinus carpio). The results showed that TiO₂ nanoparticles have a significant adsorption capacity for As (III). Equilibrium was established within 30 min, with about 30% of the initial As (III) being adsorbed onto TiO₂ nanoparticles. Most of aqueous As (III) was oxidized to As(V) in the presence of TiO₂ nanoparticles under sunlight. The carp accumulated considerably more As in the presence of TiO₂ nanoparticles than in the absence of TiO₂ nanoparticles, and after 25-day exposure, As concentration in carp increased by 44%. Accumulation of As in viscera, gills and muscle of the carp was significantly enhanced by the presence of TiO₂ nanoparticles.     

太湖蓝藻水华的遥感监测研究

随着太湖蓝藻水华的日益严重,实现藻类的时空动态监测成为湖泊水质保护亟待解决的问题.利用遥感技术可以快速、直观地获取整个水域水质的时空变化情况,为实现藻类的动态监测提供了有效的途径.在太湖蓝藻水华遥感监测研究结果的基础上,总结分析了现有研究中所使用的遥感数据源、遥感监测方法以及遥感反演的水质参数,讨论了现有研究中存在的问题,并对将来的发展趋势进行了展望.     

北京市春季大气颗粒物污染特性研究

为研究北京市春季大气颗粒物污染特性,2008年3月至2008年5月,对北京市西三环大气颗粒物进行采样分析.测定了总悬浮颗粒物(TSP)与可吸入颗粒物(PM10)的日平均质量浓度,使用扫描电子显微镜(SEM)观察大气颗粒物的微观形貌,并通过X射线能谱仪(EDX)对样品中的元素组成进行分析.结果表明,TSP和PM10日平均质量浓度以初春最高,春天次之,春夏交际最低;PM10/TSP以春夏交际最高,初春次之,春天最低;大气颗粒物形态有规则和不规则2类,以不规则形态居多,同时发现花粉颗粒存在.EDX分析表明,大气颗粒物所附着的重金属中Pb所占的质量分散最高,并且集中吸附在细粒子颗粒物上.     

颗粒化序列间歇式活性污泥反应器工艺处理化粪池污水

在序列间歇式活性污泥反应器(SBR)中成功培养出适应化粪池污水水质的好氧颗粒污泥.并将其应用于化粪池污水的处理.在好氧颗粒污泥培养的第15天左右,SBR中开始出现细小的颗粒,然后微生物在其上繁殖生长使颗粒逐渐增大而成熟;在第24天时,SBR中絮状活性污泥已基本实现了颗粒化.培养出的好氧颗粒污泥对化粪池污水有稳定的处理效果,在进水完全为化粪池污水时,COD、NH_4~+-N、TN的平均去除率分别为77%、61%、47%.但是,由于化粪池污水COD较低,因此无法维持较高的生物量,在后期的稳定运行过程中MLSS始终维持在2 500 mg/L左右.好氧颗粒污泥的同步硝化反硝化作用是其稳定脱氮的保证.     

低压稳流过滤器的研制及在油田污水处理中的应用

为了解决大庆油田现有核桃壳、石英砂过滤器反冲洗憋压、跑料和滤料再生困难等问题,在对原有过滤装置分析的基础上,根据反冲洗特性,对过滤器进行了改造,开发出低压稳流核桃壳过滤器和低压稳流石英砂过滤器。经现场测试,核桃壳过滤器反冲洗压力由原来的0.15～0.5 MPa降低到0.03～0.08 MPa,石英砂过滤器反冲洗压力由原来的0.27～0.46 MPa降低到0.17～0.20 MPa,且均能实现罐群水反冲洗。改造后核桃壳过滤器出水油平均含量13.4 mg/L,平均去除率为78.1%;出水悬浮物平均含量20.5 mg/L,平均去除率为55%。改造后石英砂过滤器出水油平均含量5 mg/L以下,平均去除率达到75%以上;出水悬浮物平均含量为9.8 mg/L,去除率达到80%以上。为了进一步提高过滤效果,在二级滤前投加絮凝剂形成微絮凝过滤工艺,出水悬浮物可达到3 mg/L,通过两级过滤达到特低渗透地层回注水标准。     

DO对好氧颗粒污泥短程同步硝化反硝化脱氮的影响

以模拟城市污水为处理对象,研究了不同溶解氧下序批式活性污泥反应器（SBR）的短程同步硝化反硝化过程特征及处理效果。试验结果表明,溶解氧浓度是实现短程同步硝化反硝化的一个重要控制参数。在亚氮积累阶段,控制温度为28～32℃,pH值为7.5～7.8,当进水NH⁺₄-N为30 mg/L左右,COD为250 mg/L左右时,亚硝酸盐氮的积累率达到96%～98%。在试验阶段,常温下控制溶解氧在0.5～1.0 mg/L,可保证氨氮的去除率达到95%～97%,总氮的去除率达到82%～85%。     

一株高效脱硫脱氨氮菌的分离、鉴定及系统发育分析

从运行稳定的能同步脱臭的曝气生物滤池中采集样品,富集分离获得一株能高效脱硫脱氨氮的菌株TS-1。对分离菌株进行形态观察、生理生化试验及16S rRNA基因序列分析,结果表明,该菌株TS-1为革兰氏阳性菌,杆状;菌落在营养琼脂培养基上呈圆形,表面光滑,乳白色半透明;V-P试验阴性,能水解淀粉和明胶,利用柠檬酸盐生长;对菌株进行16S rRNA的PCR扩增,扩增产物测序结果表明分离菌株TS-1与巨大芽孢杆菌（Bacillus megaterium）同源性达到99%;以16S rRNA同源性为基础构建了包括24株相关种属细菌在内的系统发育树,在系统发育树中,分离菌株TS1与Bacillus megaterium在同一分支。结合形态观察、生理生化试验及16S rRNA基因序列分析结果,将其初步鉴定为巨大芽孢杆菌（Bacillus megaterium）。在常温（30±2）℃、转速为150 r/min的条件下,处理pH 7、S^2-和NH⁺₄-N分别为80 mg/L和88 mg/L的水样40 h,硫化物和氨氮的脱除率分别为91.8%和96.6%。     

液-固流化床回收印刷线路板中金属的研究

根据废弃印刷线路板中材料密度不同,采用水介质流化床对印刷线路板粉末中的金属进行回收,对0.25～0.177、0.177～0.104、0.104～0.074和-0.074 mm 4个粒级范围内的物料进行分选试验。试验结果表明,在上述4个粒级范围内,随介质流速的增大,金属回收率降低;金属回收率η与实际操作速度（ua）和颗粒终端沉降速度（ut）的比值φ（ua/ut）存在一定线性关系,分析模拟了η与φ之间的相关性方程,外推试验的结果证明了相关性方程的可靠性;在合适的操作条件下,各粒级范围内金属的回收率分别为95.02%、90.07%、87.5%和92.68%。