不同气源压缩气体泡沫灭石油醚火灾性能比较

采用实验室压缩气体泡沫系统,通过缩尺油盘火试验,分别考察基于不同气源的压缩气体泡沫对于石油醚火灾的灭火性能,分析探讨适用于低沸点的石油醚类燃料火灾扑救的气源类型和供气方案。结果表明,在泡沫溶液供给强度为2.5 L/(min·m2)的条件下,压缩氮气泡沫和压缩空气泡沫均可扑灭石油醚火灾,具有良好的抗烧性能;二者相比,压缩氮气泡沫比压缩空气泡沫的控灭火性能和抗烧性能均有一定提升;对于石油醚类的低沸点易燃液体火灾,建议采用以氮气作为气源的压缩氮气泡沫系统;该研究可为压缩气体泡沫系统在石油化工行业工程应用提供技术支撑。     

挥发性油藏回注气井控因素分析及措施

文章明确了挥发性油藏天然气回注井控的安全环保关键因素;量化了低渗挥发性油藏天然气回注注入能力,确定注入端各节点安全生产压力分布,攻关相关配套工艺设备,实现安全有效注入;开展室内实验和PVT相态拟合,分析注天然气后天然气和原油性质变化规律,创新非混相驱组分数值模拟参数优化方法,开展带人工压裂裂缝的组分数值模拟,精准确定压力场分布,降低计量及监测不准带来的安全隐患;明确注气井气窜影响因素,优化注采参数,抑制油井气窜,降低生产风险,实现井控安全情况下的天然气驱环保高效开发。     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.     

A review of measurement methods for peracetic acid (PAA)

• Physical and chemical properties and application of peracetic acid solution. • Determination method of high concentration peracetic acid. • Determination method of residual peracetic acid (low concentration). Peroxyacetic acid has been widely used in food, medical, and synthetic chemical fields for the past several decades. Recently, peroxyacetic acid has gradually become an effective alternative disinfectant in wastewater disinfection and has strong redox capacity for removing micro-pollutants from drinking water. However, commercial peroxyacetic acid solutions are primarily multi-component mixtures of peroxyacetic acid, acetic acid, hydrogen peroxide, and water. During the process of water treatment, peroxyacetic acid and hydrogen peroxide (H₂O₂) often coexist, which limits further investigation on the properties of peroxyacetic acid. Therefore, analytical methods need to achieve a certain level of selectivity, particularly when peroxyacetic acid and hydrogen peroxide coexist. This review summarizes the measurement and detection methods of peroxyacetic acid, comparing the principle, adaptability, and relative merits of these methods.     

A novel sigma coordinate system to simulate abrupt changes of underwater terrain in a hydrodynamic model: application to Lake Mead,USA

The sigma (SIG) coordinate system in ocean circulation simulation models results inevitably in horizontal pressure gradient error. This problem also emerges in models of deep lakes or reservoirs with the same characteristics of underwater terrain mutation. SIG coordinates reflect vertical relative stratification but cannot be used to calculate horizontal pressure gradient force in places with drastic topographic changes; this results in vertical water temperature and circulation errors. In deep lakes or reservoirs, differences in water density caused by the temperature difference between upper and lower water bodies is the primary cause of thermal stratification phenomena. Lake Mead was used as a case study on steep topography based on Environmental Fluid Dynamics Code (EFDC) model in this study. SIG coordinates result in close agreement between the calibrated temperature time series at the top and middle water layers, but disparity in the bottom water layer. The error emerges in the horizontal pressure gradient error due to the SIG coordinate transformation. Neither increasing the vertical resolution nor adjusting the horizontal viscosity coefficient resolve this error. We test the sigma-zed (SGZ) coordinate which combines Z coordinate and SIG coordinate as a replacement for the SIG coordinate to find that they effectively reduce the model’s runtime and simulation efficiency. The vertical temperature distribution in SGZ coordinate mode is more accurate than the distribution in SIG coordinate mode. The Navier-Stokes horizontal gradient and advection diffusion equation results under SIG coordinates are very sensitive to the pressure gradient. The replacement also enhances resolution near the thermocline, facilitates reclosing of the water bottom and the equal sigma surface, lends significant advantages in terms of vertical temperature in the simulation for local deep water with steep terrain, and shortens runtime for 0.14 h. SGZ mixed coordinates are recommended in the simulation of deep lakes or reservoirs wherein the underwater topography is large (with abundant continuous deep trenches or reefs).

     

Soil labile and recalcitrant carbon and nitrogen dynamics in relation to functional vegetation groups along precipitation gradients in secondary grasslands of South China

Environmental Science and Pollution Research - Soil labile and recalcitrant carbon (C) and nitrogen (N) are strongly controlled by plant inputs and climatic conditions. However, the interrelation...     

Integrated factor analysis of water level variation in geographically isolated ponds

Environmental Science and Pollution Research - Small geographically isolated ponds provide a multitude of ecological functions and services, but water table fluctuations alter the magnitude of...     

基于PSFR模型的河北省滦河流域生态安全评估

基于PSFR(压力-状态-功能-风险)模型,选取16个分项指标、34个评估指标,建立了4层次指标体系,兼顾流域的整体性与差异性,根据环境特点及功能分区将河北省滦河流域划分为6个评估单元展开生态安全评估。结果表明:整个流域的生态安全水平位于三级到二级之间;潘大水库上游评估单元刚刚达到二级较安全水平;引滦入津、大黑汀下游和青龙河秦皇岛评估单元属于临近二级的三级水平;冀东沿海的秦皇岛和唐山评估单元生态安全指数较低,但均大于50,属于三级一般水平。研究表明,水资源过度开发是各评估单元共有的不安全因素,面源污染严重和生态风险较高也是造成流域生态安全指数不高的重要原因。     

水中总氮测定方法存在问题的研究及改进

碱性过硫酸钾消解紫外分光光度法测定水中总氮采用的消解器皿是玻璃比色管,易造成空白偏高、结果偏低等问题。采用双圆柱状的消解杯对水样进行消解。结果表明,消解杯消解水中总氮,线性相关系数均大于0.999,检出限为0.05 mg/L,相对标准偏差小于5%,相对误差为0.88%~1.00%;改进后的消解器皿具有较好的精密度和准确度,能够更加准确测定水中总氮的含量。     

近53 a来长江流域极端降水指数特征

利用1963~2015年长江流域115个气象站点逐日降水数据,分析了不同极端降水指标的空间变化特点和时间变化趋势。结果表明,近53 a来,长江流域多年平均年极端降水量与年降水量从下游到上游逐渐递减,两者变化趋势大致呈现“增-减-增”的空间分布格局。年极端降水量对年降水量贡献（PEP）存在明显的空间分布差异,但贡献比例在流域内普遍呈现增加的趋势。持续1 d的极端降水事件的降水量分布及其变化趋势与年极端降水量的分布特征类似,其对年极端降水量的贡献比例高达65%以上,说明长江流域极端降水以持续1 d的极端降水事件为主。持续2 d及以上的极端降水事件主要集在中皖苏赣局部地区和四川中部地区,但其降水量对年极端降水量的贡献比例较小。从上游到下游,年最大日降水量（MDP）逐渐增大。其中,上游源头地区的沱沱河、曲麻莱和玉树3个站点MDP主要集中在0~25 mm之间,其他站点均以25~50 mm量级为主;长江流域中部地区的MDP大部分以50~100 mm的量级为主,处于100~150 mm之间的次之;长江流域东部地区主要以100~150 mm量级的MDP为主。 关键词： 极端降水;降水贡献;不同历时;长江流域