Design and risk assessment tool for vegetative treatment areas receiving agricultural wastewater: Preliminary results

Vegetative treatment areas (VTAs) are commonly being used as an alternative method of agricultural process wastewater treatment. However, it is also apparent that to completely prevent discharge of pollutants to the surrounding environment, settling of particulates and bound constituents from overland flow through VTAs is not sufficient. For effective remediation of dissolved agricultural pollutants, VTAs must infiltrate incoming wastewater. A simple water balance model for predicting VTA soil saturation and surface discharge in landscapes characterized by sloping terrain and a shallow restrictive layer is presented and discussed. The model accounts for the cumulative effect of successive rainfall events and wastewater input on soil moisture status and depth to water table. Nash–Sutcliffe efficiencies ranged from 0.65 to 0.81 for modeled and observed water table elevations after calibration of saturated hydraulic conductivity. Precipitation data from relatively low, average, and high annual rainfall years were used with soil, site, and contributing area data from an example VTA for simulations and comparisons. Model sensitivity to VTA width and contributing area (i.e. barnyard, feedlot, silage bunker, etc.) curve number was also investigated. Results of this analysis indicate that VTAs should be located on steeper slopes with deeper, more-permeable soils, which effectively lowers the shallow water table. In sloping landscapes (>2%), this model provides practitioners an easy-to-use VTA design and/or risk assessment tool that is more hydrological process-based than current methods.     

Water Governance and Water Use Efficiency: The Five Principles of WUA Management and Performance in China1

Wang, Jinxia, Jikun Huang, Lijuan Zhang, Qiuqiong Huang, and Scott Rozelle, 2010. Water Governance and Water Use Efficiency: The Five Principles of WUA Management and Performance in China. Journal of the American Water Resources Association (JAWRA) 46(4): 665-685. DOI: 10.1111/j.1752-1688.2010.00439.x Abstract: In recent years China has attempted to reform water management by decentralizing water management responsibilities. The overall goal of our paper is to better understand the emergence of water user associations (WUAs) in China and assess if they are adhering to the practices spelled out by the Five Principles, a set of recommended practices that are supposed to lead to successful WUA operation. Using four sets of different types of villages to examine implementation and performance, we find that World Bank-supported WUA villages (“Bank villages”) can be thought of as operating mostly according to the Five Principles. For example, the Bank villages were endowed with a more reliable water supply; were set up and were operating with a relatively high degree of farmer participation; and leaders were more consultative and the process more formal. When WUAs are run according to the Five Principals, we show that WUAs increase water use efficiency. The study also provides evidence that there is a perception in the Bank villages that water management is improving in general and that there is less conflict both within the village and among villages. Perhaps more importantly, we find that the Bank’s effort to promote WUAs extended beyond their own project villages. The openness, consultative nature, and transparency found in the Bank WUAs are also found (albeit at a somewhat lower level) in the non-Bank WUA villages.     

Characterization of residues from dismantled imported wastes

Residues from the imported wastes dismantling process create a great burden on the ambient environment. To develop appropriate strategies for the disposal of such residues, their characteristics were studied through background value analysis and toxicity leaching tests. Our results showed that the heavy metals concentrations in residues were high, particularly those of Cu (7180 mg kg^?1), Zn (2783 mg kg^?1), and Pb (1954 mg kg^?1). Toxicity leaching tests revealed a high metal releasing risk of such residues if they are disposed of in a landfill. However, the residues of imported wastes were also found to have some intrinsic metal recycling value.     

Reutilisation-extended material flows and circular economy in China

Circular economy (CE), with its basic principle of Reduce, Reuse, and Recycle, has been determined as the key strategy for the national development plan by the Chinese government. Given the economy-wide material flow analysis (EW-MFA) that leaves the inner flow of resource reutilisation unidentified, the reutilisation-extended EW-MFA is first introduced to evaluate and analyse the material input, solid waste generation, and reutilisation simultaneously. The total amount of comprehensive reutilisation (CR) is divided into three sub-flows, namely, reutilisation, recycle, and reuse. Thus, this model is used to investigate the resource CR in China from 2000 to 2010. China’s total amount of CR and its sub-flows, as well as the CR rate, remain to have a general upward trend. By the year 2010, about 60% of the overall solid waste generation had already been reutilised, and more than 20% of the total resource requirement was reutilised resource. Moreover, the growth patterns of the CR sub flows show different characteristics.Interpretations of resource reutilisation-related laws and regulations of CE and the corresponding policy suggestions are proposed based on the results.     

CFD simulation of MSW combustion and SNCR in a commercial incinerator

A CFD scheme was presented for modeling municipal solid waste (MSW) combustion in a moving-grate incinerator, including the in-bed burning of solid wastes, the out-of-bed burnout of gaseous volatiles, and the selective non-catalytic reduction (SNCR) process between urea (CO(NH₂)₂) and NO_x. The in-bed calculations provided 2-D profiles of the gas–solid temperatures and the gas species concentrations along the bed length, which were then used as inlet conditions for the out-of-bed computations. The over-bed simulations provided the profiles of incident radiation heat flux on the top of bed. A 3-dimensional benchmark simulation was conducted with a 750 t/day commercial incinerator using the present coupling scheme incorporating with a reduced SNCR reduction mechanism. Numerical tests were performed to investigate the effects of operating parameters such as injection position, injection speed and the normalized stoichiometric ratio (NSR) on the SNCR performance. The simulation results showed that the distributions of gas velocity, temperature and NO_x concentration were highly non-uniform, which made the injection position one of the most sensitive operating parameters influencing the SNCR performance of moving grate incinerators. The simulation results also showed that multi-layer injections were needed to meet the EU2000 standard, and a NSR 1.5 was suggested as a compromise of a satisfactory NO_x reduction and reasonable NH₃ slip rates. This work provided useful guides to the design and operation of SNCR process in moving-grate incinerators.     

Medical waste management in China: A case study of Nanjing

Medical waste management is of great importance due to its infectious and hazardous nature that can cause undesirable effects on humans and the environment. The objective of this study was to analyze and evaluate the present status of medical waste management in the light of medical waste control regulations in Nanjing. A comprehensive inspection survey was conducted for 15 hospitals, 3 disposal companies and 200 patients. Field visits and a questionnaire survey method were implemented to collect information regarding different medical waste management aspects, including medical waste generation, segregation and collection, storage, training and education, transportation, disposal, and public awareness.The results indicated that the medical waste generation rate ranges from 0.5 to 0.8 kg/bed day with a weighted average of 0.68 kg/bed day. The segregated collection of various types of medical waste has been conducted in 73% of the hospitals, but 20% of the hospitals still use unqualified staff for medical waste collection, and 93.3% of the hospitals have temporary storage areas. Additionally, 93.3% of the hospitals have provided training for staff; however, only 20% of the hospitals have ongoing training and education. It was found that the centralized disposal system has been constructed based on incineration technology, and the disposal cost of medical waste is about 580 US$/ton. The results also suggested that there is not sufficient public understanding of medical waste management, and 77% of respondents think medical waste management is an important factor in selecting hospital services.The problematic areas of medical waste management in Nanjing are addressed by proposing some recommendations that will ensure that potential health and environmental risks of medical waste are minimized.     

Using fuzzy method to evaluate safety condition of big diesel engine

Big diesel engine is one of the most important equipments in industry, and its safety condition plays a great role in oil production. This paper presents a fuzzy method to monitor the safety state of the big diesel. Six useful diagnostic characteristic parameters have been selected to diagnose safety condition of the big diesel engine. The standard fuzzy vector was obtained by using statistical method, so the status of big diesel's safety condition can be determined by calculating the fuzzy distance between the fuzzy vector and standard fuzzy vector. This fuzzy method has been successfully used on PZ12V190 diesel engine.     

耐静水压测定仪的研制

本文介绍了用于测定高效过滤纸和防水织物抗渗水性的耐静水压测定仪的设计思路和组成结构,通过采用变频器控制电动机的转速成功地研制了性能稳定的耐静水压测定仪.     

震前预防的实践与成效——新疆两大抗震工程

继2004年新疆实施城乡抗震安居工程后,2008年6月。借鉴汶川地震的教训,新疆决定实施《自治区城乡重要建（构）筑物抗震防灾工程》。城乡抗震安居工程的实施对象是城乡民居;城乡重要建（构）筑物抗震防灾工程的实施对象则主要是各地学校、医院、幼儿园儿童和老年人福利机构等公共建筑,城镇供水、供热、燃气等设施,应急救援指挥机构办公楼、影剧院、体育场馆、会堂（礼堂）等工程。两大工程的实施无疑将使新疆这个多震的少数民族边远地区全面提升地震综合防御能力。