When the Going Gets Tough,Communities Believe It's Time to Optimize and Adapt

The people who live in the communities where complex groundwater sites are located are as diverse as the country itself, but those who fight for the cleanup of our groundwater recognize that total cleanup may be difficult, if not impossible, in our lifetimes. Still, as explained in a December 2013 joint letter to US EPA, we want those who are responsible for environmental protection, be they polluters, developers, or regulatory agencies, to try harder before admitting defeat. In Mountain View, California, community activists have developed criteria for the adaptive cleanup of the Moffett‐MEW Regional Plume of TCE groundwater contamination that emphasizes areas with high contaminant mass, source areas, locations that reduce the need for long‐term vapor intrusion mitigation, properties where the detectable plume encroaches on residential areas, schools, and other sensitive uses, and areas planned for reuse. In many other communities, trust is the key to developing community support for remedial strategies. Communities that are listened to tend to feel more empowered. Empowered communities tend to offer more constructive advice. Decision makers tend to listen to communities that offer constructive advice. In summary, when the cleanup going gets tough, empowered communities believe that it is time to optimize and adapt, not to give up. © 2014 Wiley Periodicals, Inc.     

Hatching asynchrony reduces the duration, not the magnitude, of peak load in breeding green-rumped parrotlets (Forpus passerinus)

The peak load reduction hypothesis suggests that hatching asynchrony in altricial birds is adaptive because it reduces parental workload during the most energetically costly time in brood rearing. By staggering the ages of their offspring, parents may ensure that all nestlings do not reach maximum energy demand simultaneously. To test the hypothesis, we used the doubly labeled water technique to measure the energy expenditure of green-rumped parrotlets (Forpus passerinus) that reared experimentally manipulated synchronous and asynchronous broods. Peak metabolic rates of the two experimental groups did not differ, but parents of asynchronous broods metabolized significantly less energy than did parents of synchronous broods throughout the first half of the brood-rearing period. Our results suggest that hatching asynchrony in parrotlets substantially shortens the temporal duration of high brood energy demand, but does not reduce the magnitude of peak energy demand. Received: 16 July 1998 / Accepted after revision: 13 December 1998     

Numerical modeling of coupled variably saturated fluid flow and reactive transport with fast and slow chemical reactions

The couplings among chemical reaction rates, advective and diffusive transport in fractured media or soils, and changes in hydraulic properties due to precipitation and dissolution within fractures and in rock matrix are important for both nuclear waste disposal and remediation of contaminated sites. This paper describes the development and application of LEHGC2.0, a mechanistically based numerical model for simulation of coupled fluid flow and reactive chemical transport, including both fast and slow reactions in variably saturated media. Theoretical bases and numerical implementations are summarized, and two example problems are demonstrated. The first example deals with the effect of precipitation/dissolution on fluid flow and matrix diffusion in a two-dimensional fractured media. Because of the precipitation and decreased diffusion of solute from the fracture into the matrix, retardation in the fractured medium is not as large as the case wherein interactions between chemical reactions and transport are not considered. The second example focuses on a complicated but realistic advective-dispersive-reactive transport problem. This example exemplifies the need for innovative numerical algorithms to solve problems involving stiff geochemical reactions.     

Ultrastructural localization of uranium biosorption in Penicillium digitatum by stem X-ray microanalysis

When Penicillium digitatum Saccardo cultures are exposed to aqueous solutions containing soluble uranium salts, considerable amounts of this element are accumulated in the fungal mycelium. The accumulated uranium is retained after thorough rinsing with distilled water but is removed by alkali carbonate solutions. Analysis of thick sections (0.5 microm) of the fungal hyphae with TEM, after incubation in UO(2)Cl(2) solutions of varying concentrations under both light and dark conditions, revealed conspicuous crystal-like deposits in UO(2)Cl(2)-exposed hyphae, but none in the control hyphae. Thick sections were necessary for crystal visualization. Using energy-dispersive X-ray analysis, uranium was detected as the only heavy element in these crystals. Uranium crystal biosorption was localized on the outside surface of the hyphal cell wall (following short exposures to relatively low uranium concentrations) or inside the cell wall (following long exposure to relatively high uranium concentrations). In some cases, crystal-like deposits of uranium salts were located on the outside surface as well as inside the cell.     

QUANTIFICATION OF THE WATER BUDGET AND NUTRIENT LOADING IN A SMALL PEATLAND1

ABSTRACT: Few water budgets exist for specific types of wetlands such as peatlands, even though such information provides the basis from which to investigate linkages between wetlands and upland ecosystems. In this study, we first determined the water budget and then estimated nutrient loading from an upland farm field into a 1.5 ha, kettle-block peatland. The wetland contains highly anisotropic peat and has no distinct, active layer of groundwater flow. We estimated the depth of the active layer using Fick's law of diffusion and quantified groundwater flow using a chemical mass balance model. Evapotranspiration was determined using MORECS, a semi-physical model based on the Penman-Monteith approach. Precipitation and surface outflow were measured using physical means. Groundwater provided the major inflow, 84 percent (44,418 m³) in 1993 and 88 percent (68,311 m³) in 1994. Surface outflow represented 54 percent (28,763 m³) of total outflows in 1993 and 48 percent (37,078 m³) in 1994. A comparison of several published water budgets for wetlands and lakes showed that error estimates for hydrologic components in this study are well within the range of error estimates calculated in other studies. Groundwater inflow estimates and nutrient concentrations of three springs were used to estimate agricultural nutrient loading to the site. During the study period, nutrient loading into the peatland via groundwater discharge averaged 24.74 kg K ha^-1, 1.83 kg total inorganic P ha^d, and 21.81 kg NO₃-N ha^-1.     

Comparison of discharge silver concentrations from electrolytic plating and metallic replacement silver recovery units

Silver-based photographic X-ray film is made of solid crystals of silver chloride or silver bromide suspended in a gelatin and then coated on a film. During the X-ray developing process, the image is processed and the nonimage areas containing solid silver chloride or silver bromide crystals are removed in a solution called the fixer. There may be local environmental regulations that regulate the amount of silver discharged from a facility. To meet these regulations, many facilities have added silver recovery units to their processes. Two different types of recovery processes are in use in a large hospital and three clinics under study. All of the units were claimed by their respective manufacturers to be able to recover silver down to concentrations of 5 mg/L. This concentration would ensure that the building that houses each unit would meet the local county limit of 0.5 mg/L silver for total building silver discharge. The hypothesis for this research is that one system, newer and more expensive, consisting of so-called electrolytic plating units (EPUs) (which are followed by so-called metallic replacement units [MRUs] as a backup), will have better silver recovery than MRUs alone. A total of six units were sampled, three EPUs (in combination with MRUs) and three MRUs. The units were sampled once or twice a day for 10 days for a total of 17 samples from each. The samples then were analyzed by inductively coupled plasma spectroscopy, and an analysis of variance was performed on the results. The range for the electrolytic plating unit/metallic replacement unit combinations was 0.20-99.9 mg/L (mean of 35.15 mg/L; median of 33.8 mg/L). The range for the MRUs alone was 7.2-1112 mg/L (mean of 565.5 mg/L; median of 720 mg/L). Many individual results exceeded 5 mg/L, such that extensive dilution would be required to ensure the building effluent did not exceed 0.5 mg/L. It is suggested that the metallic replacement units be changed to EPUs (with metallic replacement backup units) because they had better silver recovery. Also, the EPU combinations need to be sampled regularly to ensure that their silver concentrations are at acceptable levels.     

A CHLORIDE BUDGET FOR THE MISSISSIPPI RIVER,HEADWATERS TO MOUTH1

ABSTRACT Mass budgets for chloride were estimated from 1975-1978 for the Mississippi River from headwaters to near the mouth to determine the magnitudes of natural and anthropogenic sources. Annual chloride input from precipitation ranged from about 200 kg mi^-2yr^-1 at Royalton, Minnesota, to about 350 kg mi^-2yr^-1 at Vicksburg, Mississippi. Mass export ranged from about 900 kg mi^-2yr^-1 at Royalton to about 8000 kg mi^-2yr^-1 at Vicksburg. As much as 80 percent of the residual, the difference between input and export, probably is contributed by anthropogenic sources. In particular, semi-logarithmic scatterplots of monthly total discharge against chloride concentration show that, during early spring, chloride elevations in the Mississippi River and Ohio River are elevated, possibly because of flushing of road salt and leaching of chloride from the accumulated snowpack.