Sources of potentially toxic elements and organic pollutants in an urban area subjected to an industrial impact

Urban and industrial development has caused a major impact on environmental soil quality. This work assesses the extent and severity of contamination in a small urban area subjected to an industrial impact and identifies the major anthropogenic inputs. Twenty-six soil samples were collected from agricultural and urban sites, and concentrations of potentially toxic elements (As, Cd, Cu, Cr, Fe, Mn, Ni, Pb and Zn), PAHs and PCBs, were determined. In spite of the low median concentrations observed, some sites represent a potential hazard for human health and ecosystems. Concentrations of contaminants were higher than those found in a nearby city, indicating that the study area is affected by the surrounding industry. The use of multivariate statistical analyses allowed for the identification of the main factors controlling the variability of potentially toxic elements and organic pollutants in the soils. The presence of Cr, Fe, Mn and Ni was associated with geogenic inputs, and Cu, Pb, Zn, As, PAHs and PCBs were associated with anthropogenic inputs. Industry and traffic were the most important anthropogenic sources. Soil characteristics were identified as important factors controlling the spatial variability of elements, both from recognised natural and anthropogenic origin. Differences between land uses were observed, which may be attributed to both management practices and proximity to sources.     

Particle emission from heavy-duty engine fuelled with blended diesel and biodiesel

In this study, particulate matter (PM) were characterized from a place impacted by heavy-duty vehicles (Bus Station) fuelled with diesel/biodiesel fuel blend (B3) in the city of Londrina, Brazil. Sixteen priority polycyclic aromatic hydrocarbons (PAH) concentrations were analyzed in the samples by their association with atmospheric PM, mass size distributions and major ions (fluorite, chloride, bromide, nitrate, phosphate, sulfate, nitrite, oxalate; fumarate, formate, succinate and acetate; lithium, sodium, potassium, magnesium, calcium and ammonium). Results indicate that major ions represented 21.2% particulate matter mass. Nitrate, sulfate, and ammonium, respectively, presented the highest concentration levels, indicating that biodiesel may also be a significant source for these ions, especially nitrate. Dibenzo[a,h]anthracene and indeno[1,2,3,-cd]pyrene were the main PAH found, and a higher fraction of PAH particles was found in diameters lower than 0.25 μm in Londrina bus station. The fine and ultrafine particles were dominant among the PM evaluated, suggesting that biodiesel decreases the total PAH emission. However, it does also increase the fraction of fine and ultrafine particles when compared to diesel.     

A review on human attitudes towards reptiles in Brazil

For many millennia humans and reptiles have interacted, but the attitude of humans towards these animals has depended on culture, environment, and personal experience. At least 719 reptile species are known to occur in Brazil and about 11% of this fauna has been exploited for many different purposes, including bushmeat, leather, ornamental and magic/religious uses, and as folk medicines. Brazil can therefore serve as an interesting case study for better understanding reptile use by human societies, and the present paper catalogues some of the reptile species being used in Brazil and discusses implications for their conservation. A literature review indicated that 81 reptile species are culturally important in this country, with 47 (58%) species having multiple uses, 54 being used for medicinal purposes, 38 as food, 28 for ornamental or decorative purposes, 20 used in magic/religious practices, 18 as pets, and 40 are commonly killed when they come into contact with humans. Regarding their conservation status, 30 (37.5%) are included on State's Red List, Brazilian Red List or the IUCN Red List. There are many forms of interaction between reptiles and humans in Brazil-although most of them are quite negative in terms of wildlife conservation-which reinforces the importance of understanding such uses and interactions in the context of protecting reptiles in Brazil. A better understanding of the cultural, social, and traditional roles of these reptiles is fundamental to establishing management plans for their sustainable use.     

Rapid and Low-Cost Method for Evaluation of Nutrient Release from Controlled-Release Fertilizers Using Electrical Conductivity

Methods to determine nutrient release rates of coated fertilizers usually rely on chemical analyses, which often are time-consuming and/or expensive. Our goal was to develop an innovative and rapid low-cost method to evaluate nutrient release from polymer coated MAP or urea using conductometry. The release in water is determined by measuring the electric conductivity (EC) over time, with intervals dependent on release rates. In the case of soluble salt fertilizers, EC can be immediately determined and converted to a concentration using a calibration curve. In the case of urea, an additional step is needed to convert the neutral urea into ammonium. The release rates in water were assessed for a range of commercial and laboratory-coated fertilizers. A validation test demonstrated strong agreement with the release determined using analytical techniques. The EC method hence offers an easy way to quickly evaluate the time course of release of nutrients from controlled-release fertilizers.     

Composites Produced from Natural Rubber and Chrome-Tanned Leather Wastes: Evaluation of their In Vitro Toxicological Effects for Application in Footwear and Textile Industries

A new composite has been developed from natural rubber and chrome-tanned leather waste for use in footwear and textile industries. The contribution of this material to environmental quality and sustained development should be highligh because chrome tanned leather wastes, a major environmental problem, can be recycled. However, the safety of this new material for human use is questionable, as it is already well reported in the literature that chromium, particularly in its hexavalent oxidation state, can be genotoxic and carcinogenic to living beings. Thus, the aim of this study was to evaluate in vitro biocompatibility of this composite material for possible use in the footwear and textile industries, through cytotoxicity, cell adhesion, and genotoxicity tests. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to measure both concentrations of total and hexavalent chromium. Based on the findings, it was concluded that the composite exhibits low levels of cytotoxicity and genotoxicity, and possesses favorable properties for initial cell adhesion. Furthermore, it was verified that the composites released low concentrations of chromium and that the predominant species released would be trivalent chromium. The results of the present study open the possibility of the incorporation of solid residues of tanned leather into chromium without necessarily the chromium contained in these residues influences the toxicity and genotoxicity of this new material.     

Detection Limits for Hazardous and Radioactive Elements in Airborne Aerosols Using Inductively Coupled Air Plasma – Atomic Emission Spectrometry

Abstract

This research presents investigations into the use of inductively coupled air plasma – atomic emission spectrometry (air-plasma ICPAES) to determine the presence of inorganic contaminants in airborne aerosols. Limits of detection (LOD) in the ppm to ppb range for 19 hazardous metals and radionuclides were determined for aerosols of solutions nebulized into the air plasma. For many elements, the determined LOD surpass the threshold limit values established by the American Conference of Governmental Industrial Hygienists by one to three orders of magnitude. The potential of air-plasma ICPAES for continuous on-line monitoring of airborne contaminants is discussed.     

Host-guest complexes of phenoxy alkyl acid herbicides and cyclodextrins. MCPA and β-cyclodextrin

The chlorophenoxy herbicide MCPA (4-chloro-2-methylphenoxyacetic acid), widely used for the control of broad-leaf weeds primarily in cereal and grass seed crops, still remains one of the most often used herbicides in Portugal. As the formation of inclusion complexes with cyclodextrins can improve its solubility properties, the interaction between the herbicide MCPA and β-cyclodextrin was investigated. The stability constants describing the extent of formation of the complexes have been determined by phase-solubility studies. Different analytical techniques [ultraviolet-visible spectroscopy (UV-Vis), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR)] were employed for a thorough investigation of the structural characteristics of the obtained complexes, which exhibited distinct features and properties from both “guest” and “host” molecules. FTIR and ¹H NMR data obtained for the MCPA/β-CD complexes gave information about the interaction between MCPA and the nonpolar cyclodextrin cavity. The dramatic change observed in band frequency and proton displacements of OCH₂ group and H6 aromatic proton confirmed the inclusion of MCPA in β-CD.

The formation of an inclusion complex between MCPA and β-CD increased the aqueous solubility of this herbicide which could be a particularly advantageous property for some specific applications, namely to improve commercial formulation and for environmental protection.