Pretreated waste landfilling: relation between leachate characteristics and mechanical behaviour

The present paper presents a part of a wider research effort aiming at studying the long-term behaviour of different pre-treated wastes once landfilled; in particular, this paper deals with the analysis of settlements and their correlation with the main leachate biochemical parameters (BOD, COD and pH). The municipal solid waste organic fraction (MSWOF) and bottom ash (BA) from incineration of municipal solid waste (MSW) were considered in the study and used to set up different semi-pilot landfill plants. Particularly, the FT plant contained 90 days aerobically biostabilized MSWOF, the FP plant was filled with 15 days aerobically biostabilized MSWOF and the MX plant with a 30-70% (by weight) mixture of BA and the same MSWOF used in the FP plant. The data obtained showed a faster mechanical and biological stabilization of the FT and MX plants, due to the less biodegradable organic fraction content initially present in the FT plant and to the presence of BA, having a stabilizing effect, in the MX plant. Besides, similar behaviour of FT and MX was observed, and also a strong correlation between the settlement and the biochemical parameters time profiles was identified.     

Organochlorine pesticides in feathers of three raptor species in southern Brazil

Environmental Science and Pollution Research - In this study, we determined the presence of organochlorine pesticides (OCPs) in back feathers from three raptor species, Phalcoboenus chimango,...     

Photocatalytic elimination of indoor air biological and chemical pollution in realistic conditions

The photocatalytic elimination of microorganisms from indoor air in realistic conditions and the feasibility of simultaneous elimination of chemical contaminants have been studied at laboratory scale. Transparent polymeric monoliths have been coated with sol-gel TiO(2) films and used as photocatalyst to treat real indoor air in a laboratory-scale single-step annular photocatalytic reactor. The analytical techniques used to characterize the air quality and analyze the results of the photocatalytic tests were: colony counting, microscopy and PCR with subsequent sequencing for microbial quantification and identification; automated thermal desorption coupled to gas chromatography with mass spectrometry detection for chemical analysis. The first experiments performed proved that photocatalysis based on UVA-irradiated TiO(2) for the reduction of the concentration of bacteria in the air could compete with the conventional photolytic treatment with UVC radiation, more expensive and hazardous. Simultaneously to the disinfection, the concentration of volatile organic compounds was greatly reduced, which adds value to this technology for real applications. The fungal colony number was not apparently modified.     

Adsorption of pharmaceutical compounds and an endocrine disruptor from aqueous solutions by carbon materials

Adsorption has been used to study the removal of atenolol, caffeine, diclofenac and isoproturon, pharmaceutical compounds as emerging contaminants and an endocrine disruptor from ultrapure water and a municipal wastewater treatment plant effluent with three carbonaceous materials: activated carbon, multiwalled carbon nanotubes and carbon nanofibers. The adsorption capacities were studied in the temperature range of 25-65°C and pH range from 3 to 9. Several model isotherms were used to model the adsorption equilibrium data. Also, the competitive adsorption was evaluated.     

Integrated sustainability assessments: a spatial multicriteria evaluation for siting a waste incinerator plant in the Province of Torino (Italy)

The present paper proposes a spatial multicriteria approach for supporting decision makers in the siting process of a waste incinerator plant in the Province of Torino (Italy). Municipal solid waste management is an intrinsically complex problem because it involves different interconnected elements and must achieve objectives that are often in conflict. Given the spatial nature of the problem, a useful support is provided by a family of methods that are rapidly gaining traction for planning and policy-making, named multicriteria spatial decision support systems, which are based on geographical information systems and multicriteria analysis coupling. In the present study, a methodological framework is proposed for the integration of geographical information systems with a specific multicriteria analysis technique, named Analytic Network Process. The method is illustrated with reference to a case study in the Province of Torino. The purpose of the research is to generate a suitability map of the area under analysis in order to locate a municipal solid waste incinerator plant. The application allows the dependence relationships between the criteria to be assessed and the relative importance of all the elements to be evaluated. The results are obtained in the form of maps analyzed through the ILWIS 3.3 GIS software and have been further verified through a “what-if” analysis with reference to the clusters priorities in order to test the robustness of the model. The implementation of the spatial Analytic Network Process technique gives an originality value to the present research since it represents one of the first applications at both the national and international levels.     

Urinary methyl tert-butyl ether and benzene as biomarkers of exposure to urban traffic

Methyl tert-butyl ether (MTBE) and benzene are added to gasoline to improve the combustion process and are found in the urban environment as a consequence of vehicular traffic. Herein we evaluate urinary MTBE (MTBE-U) and benzene (BEN-U) as biomarkers of exposure to urban traffic. Milan urban policemen (130 total) were investigated in May, July, October, and December for a total of 171 work shifts. Personal exposure to airborne benzene and carbon monoxide (CO), and atmospheric data, were measured during the work shift, while personal characteristics were collected by a questionnaire. A time/activity diary was completed by each subject during the work shift. Spot urine samples were obtained for the determination of MTBE-U and BEN-U. Median personal exposure to CO and airborne benzene were 3.3 mg/m(3) and 9.6 μg/m(3), respectively; median urinary levels in end-of-shift (ES) samples were 147 ng/L (MTBE-U) and 207 ng/L (BEN-U). The time spent on traffic duty at crossing was about 40% of work time. Multiple linear regression models, taking into account within-subject correlations, were applied to investigate the role of urban pollution, atmospheric conditions, job variables and personal characteristics on the level of biomarkers. MTBE-U was influenced by the month of sampling and positively correlated to the time spent in traffic guarding, CO exposure and atmospheric pressure, while negatively correlated to wind speed (R(2) for total model 0.63, P<0.001). BEN-U was influenced by the month and smoking habit, and positively correlated to urinary creatinine; moreover, an interaction between CO and smoking was found (R(2)=0.62, P<0.001). These results suggest that MTBE-U is a reliable marker for assessing urban traffic exposure, while BEN-U is determined mainly by personal characteristics.     

The addition of organic carbon and nitrate affects reactive transport of heavy metals in sandy aquifers

Organic carbon introduction in the soil to initiate remedial measures, nitrate infiltration due to agricultural practices or sulphate intrusion owing to industrial usage can influence the redox conditions and pH, thus affecting the mobility of heavy metals in soil and groundwater. This study reports the fate of Zn and Cd in sandy aquifers under a variety of plausible in-situ redox conditions that were induced by introduction of carbon and various electron acceptors in column experiments. Up to 100% Zn and Cd removal (from the liquid phase) was observed in all the four columns, however the mechanisms were different. Metal removal in column K1 (containing sulphate), was attributed to biological sulphate reduction and subsequent metal precipitation (as sulphides). In the presence of both nitrate and sulphate (K2), the former dominated the process, precipitating the heavy metals as hydroxides and/or carbonates. In the presence of sulphate, nitrate and supplemental iron (Fe(OH)(3)) (K3), metal removal was also due to precipitation as hydroxides and/or carbonates. In abiotic column, K4, (with supplemental iron (Fe(OH)(3)), but no nitrate), cation exchange with soil led to metal removal. The results obtained were modeled using the reactive transport model PHREEQC-2 to elucidate governing processes and to evaluate scenarios of organic carbon, sulphate and nitrate inputs.     

Occurrence of multiclass UV filters in treated sewage sludge from wastewater treatment plants

Many substances related to human activities end up in wastewater and accumulate in sewage sludge. So far, there is only one extensive survey on the occurrence of UV filter residues in sewage sludge. However, more data are required to draw a reliable picture of the fate and effects of these compounds in the environment. This study attempts to fill this gap through the determination of selected UV filters and derivatives namely 4-methylbenzylidenecamphor, benzophenone-3, octocrylene, ethylhexylmethoxycinnamate, ethylhexyldimethyl PABA, 4-hydroxybenzophenone, 2,4-dihydroxybenzophenone, and 4,4′-dihydroxybenzophenone in treated sewage sludge.The target compounds were extracted using pressurized liquid extraction and after this, determined by ultra high resolution liquid chromatography-tandem mass spectrometry. The determination was fast and sensitive, affording limits of detection lower than 19 ng g⁻¹ dry weight (dw) except for 2,4-dihydroxybenzophenone (60 ng g⁻¹ dw). Good recovery rates, especially given the high complexity of sludge matrix (between 70% and 102% except for 2,4-dihydroxybenzophenone (30%)) were achieved.The application of developed method allowed reporting for the first time the occurrence of two major degradation products of benzophenone-3 that have estrogenic activity in sewage sludge: 4,4′-dihydroxybenzophenone (in 5/15 WWTPs) and 4-hydroxybenzophenone (in 1/15 WWTPs). Results revealed the presence of UV filters in 15 wastewater treatment plants in Catalonia (Spain) at concentrations ranging from 0.04 to 9.17 μg g⁻¹ dw.     

Binational school-based monitoring of traffic-related air pollutants in El Paso, Texas (USA) and Ciudad Juárez, Chihuahua (México)

Paired indoor and outdoor concentrations of fine and coarse particulate matter (PM), PM2.5 reflectance [black carbon(BC)], and nitrogen dioxide (NO₂) were determined for sixteen weeks in 2008 at four elementary schools (two in high and two in low traffic density zones) in a U.S.-Mexico border community to aid a binational health effects study. Strong spatial heterogeneity was observed for all outdoor pollutant concentrations. Concentrations of all pollutants, except coarse PM, were higher in high traffic zones than in the respective low traffic zones. Black carbon and NO₂ appear to be better traffic indicators than fine PM. Indoor air pollution was found to be well associated with outdoor air pollution, although differences existed due to uncontrollable factors involving student activities and building/ventilation configurations. Results of this study indicate substantial spatial variability of pollutants in the region, suggesting that children’s exposures to these pollutants vary based on the location of their school.     

Thermal decomposition of electronic wastes: mobile phone case and other parts

Pyrolysis and combustion runs at 850°C in a horizontal laboratory furnace were carried out on different parts of a mobile phone (printed circuit board, mobile case and a mixture of both materials). The analyses of the carbon oxides, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), polychlorodibenzo-p-dioxin, polychlorodibenzofurans (PCDD/Fs), and dioxin-like PCBs are shown. Regarding semivolatile compounds, phenol, styrene, and its derivatives had the highest yields. In nearly all the runs the same PAHs were identified, naphthalene being the most common component obtained. Combustion of the printed circuit board produced the highest emission factor of PCDD/Fs, possibly due to the high copper content.