Persistent Organic Pollutants in gull eggs of two species (Larus michahellis and Larus audouinii) from the Ebro delta Natural Park

The aim of this study was to determine the impact of priority and emerging Persistent Organic Pollutants (POPs) in gull eggs from two species, the scavenger Larus michahellis and the protected species, Larus audouinii. These two species share habitat in the Natural Park of the Ebro delta (Catalonia, Spain). Compounds studied are included or under consideration in the Stockholm Convention and comprise polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), organochlorinated compounds (OCs), perfluorinated compounds (PFCs) and short chain chlorinated paraffins (SCCPs). Four methods based in selective extraction and gas or liquid chromatography coupled to mass spectrometry were used and quality parameters are provided. OC pesticides and marker PCBs were the most abundant chemical families detected in eggs from the two species, followed by PFCs, PBDEs (especially BDE 209) and SCCPs. Dioxin-like PCBs and PCDD/Fs were also detected in all samples. The overall widespread presence of POPs is discussed in terms of feeding habits, bird ecology and anthropogenic pressures in the protected Ebro delta breeding area.     

Diquat associated with copper sources for algae control: Efficacy and ecotoxicology

The aims of this research were to evaluate the efficacy of copper oxychloride (CuCl₂.3Cu(OH)₂), copper hydroxide (Cu(OH)₂) and diquat (1.1′-ethylene-2.2′-bipyridyldiylium dibromide), isolated and in association with 0.1% of both copper sources, in the control of the unicellular algae Ankistrodesmus gracilis and the filamentous algae Pithophora kewesis, and to determine the acute toxicity of the tested chemicals in Hyphressobrycon eques, Pomacea canaliculata, Lemna minor and Azolla caroliniana. The efficacy was estimated by the methods of chlorophyll a and pheophytin a readings, changed into growth inhibition percentage. Both algae were exposed to the following concentrations: 0.2; 0.4; 0.8; 1.2 mg L^?1 of diquat and its association with the copper sources; and 0.1; 0.3; 0.5; 0.7; 1.0 and 1.5 mg L^?1 in the isolated applications of copper hydroxide and copper oxychloride. An untreated control was kept. The acute toxicity was estimatedby 50% lethal concentration (LC50). The copper sources were effective for A. gracilis control, at rates as high as 0.1 mg L^?1 (>95% efficacy). Isolated diquat and its association with copper hydroxide were both effective at rates as high as 0.4 mg L^?1, with 95 and 88% control efficacy, respectively. The copper oxychloride was effective at 0.2 mg L^?1, with 93% efficacy. None of the tested chemicals and associations was effective on P. kewesis control. The most sensitive non target organism to the tested chemicals was L. minor; the less sensitive was H. eques.     

Carbon mineralization,microbial activity and metal dynamics in tailing ponds amended with pig slurry and marble waste

A field experiment was set up in Cartagena-La Unión Mining District, SE Spain, aimed at evaluating the short-term effects of pig slurry (PS) amendment alone and together with marble waste (MW) on organic matter mineralization, microbial activity and stabilization of heavy metals in two tailing ponds. These structures pose environmental risk owing to high metals contents, low organic matter and nutrients, and null vegetation. Carbon mineralization, exchangeable metals and microbiological properties were monitored during 67 d. The application of amendments led to a rapid decrease of exchangeable metals concentrations, except for Cu, with decreases up to 98%, 75% and 97% for Cd, Pb and Zn, respectively. The combined addition of MW + PS was the treatment with greater reduction in metals concentrations. The addition of PS caused a significant increase in respiration rates, although in MW + PS plots respiration was lower than in PS plots. The mineralized C from the pig slurry was low, approximately 25–30% and 4–12% for PS and MW + PS treatments, respectively. Soluble carbon (Csol), microbial biomass carbon (MBC) and β-galactosidase and β-glucosidase activities increased after the application of the organic amendment. However, after 3 d these parameters started a decreasing trend reaching similar values than control from approximately day 25 for Csol and MBC. The PS treatment promoted highest values in enzyme activities, which remained high upon time. Arylesterase activity increased in the MW + PS treatment. Thus, the remediation techniques used improved soil microbiological status and reduced metal availability. The combined application of PS + MW reduced the degradability of the organic compounds.     

Food contamination control in European new Member States and associated candidate countries: Data collected within the SAFEFOODNET project

This paper reports the results obtained from the data collected within the European Commission funded project SAFEFOODNET regarding the state of the art in the control of chemical food contaminants in twelve European New Member States and one Associated Candidate Country (Turkey). Information has been gathered on institutions involved in food chemical contamination control, types of contaminants and matrices analyzed, procedures for data quality assurance, purposes of the analyses and accessibility of data in the participant countries. The resulting picture points out the general availability of adequate capabilities for the analysis of food contaminants in the laboratories in charge of control and the performance of the analysis of a large variety of chemicals (persistent organic pollutants, polycyclic aromatic hydrocarbons, pesticides, mycotoxins, heavy metals, radionuclides) in almost each country with few exceptions (dioxins in Bulgaria, Turkey, Latvia, persistent organic pollutants in Lithuania and Malta, polycyclic aromatic hydrocarbons in Malta). The application of validated analytical methods and the process of laboratory accreditation are partially fulfilled within the investigated countries, but still forthcoming for some countries, as in Romania, Turkey and Malta. Information collected on food controls is only partially available online and the language used is prevalently local and English to a lesser extent.     

Leaching of S-metolachlor,terbuthylazine, desethyl-terbuthylazine,mesotrione, flufenacet,isoxaflutole, and diketonitrile in field lysimeters as affected by the time elapsed between spraying and first leaching event

The effect of elapsed time between spraying and first leaching event on the leaching behavior of five herbicides (terbuthylazine, S-metolachlor, mesotrione, flufenacet, and isoxaflutole) and two metabolites (desethyl-terbuthylazine and diketonitrile) was evaluated in a 2011–2012 study in northwest Italy. A battery of 12 lysimeters (8.4 m² long with a depth of 1.8 m) were used in the study, each filled with silty-loam soil and treated during pre-emergence with the selected herbicides by applying a mixture of commercial products Lumax (4 L ha^?1) and Merlin Gold (1 L ha^?1). During treatment periods, no gravity water was present in lysimeters. Irrigation events capable of producing leaching (40 mm) were conducted on independent groups of three lysimeters on 1 day after treatment (1 DAT), 7 DAT, 14 DAT, and 28 DAT. The series was then repeated 14 days later. Leachate samples were collected a few days after irrigation; compounds were extracted by solid phase extraction and analyzed by high-performance liquid chromatography and gas chromatography–mass spectrometry. Under study conditions, terbuthylazine and S-metolachlor showed the highest leaching potentials. Specifically, S-metolachlor concentrations were always found above 0.25 µg L^?1. Desethyl-terbuthylazine was often detected in leached waters, in most cases at concentrations above 0.1 µg L^?1. Flufenacet leached only when irrigation occurred close to the time of herbicide spraying. Isoxaflutole and mesotrione were not measured (<0.1 µg L^?1), while diketonitrile was detected in concentrations above 0.1 µg L^?1 on 1 DAT in 2011 only.     

Application of QuEChERS method and gas chromatography-mass spectrometry for the analysis of cypermethrin residue in milk

Analytical methods for the isolation and determination of cypermethrin in milk, based on the solid-phase microextraction (SPME) and QuEChERS methods (Quick, Easy, Cheap, Effective, Rugged, and Safe) are presented. The SPME technique was not appropriate to analyse cypermethrin in milk, even establishing the best extraction conditions, polydimethylsiloxane fiber, 60 min time extraction, 60 °C temperature extraction, addition of salt (NaCl) and stirring rate. The extraction efficiency was low probably because of the matrix constituents. The QuEChERS method involves the extraction of the analyte with acetonitrile and simultaneous liquid-liquid partitioning formed by adding anhydrous MgSO₄ plus NaCl, followed by the removal of residual water and cleanup using a procedure called dispersive solid-phase extraction, in which anhydrous MgSO₄ plus PSA and C18 are mixed with 1 mL of acetonitrile extract. The detection and quantification limits were 0.01 and 0.04 mg kg^?1, respectively, and the percentage recovery obtained ranged from 92 to 105% with relative standard deviations below 7%.     

One-Year Study of the Elemental Composition and Source Apportionment of PM10 Aerosols in Florence,Italy

Abstract

An extensive investigation was carried out for the characterisation of the air particulate composition in Florence. The aim was to determine the aerosol elemental concentrations, as well as to identify pollution sources. For our investigation, the external Particle-Induced X-Ray Emission–Particle-Induced γ-Ray Emission beam facility of the Istituto Nazionale di Fisica Nucleare, Van de Graaff accelerator at the Physics Department of the Florence University was used. We report the results of the analysis of a long temporal series (approximately 1 yr) of PM₁₀ particulate samples, collected on Millipore filters on a daily basis in three different sites (characterised by different urban settings). Daily concentrations of more than 20 elements were detected. The long sampling period (approximately 1 yr) allowed a comparison with the air quality recommended values and the identification of seasonal variations. Four main sources (traffic, oil-combustion, soil-dust, and wind transported sea-salt) were extracted with the help of Principal Component Analysis (PCA). An absolute PCA showed traffic to be the major source both in the high traffic site and in the urban background site.     

Characterization of post-consumer polyolefin wastes by hyperspectral imaging for quality control in recycling processes

In this paper new analytical inspection strategies, based on hyperspectral imaging (HSI) in the VIS–NIR and NIR wavelength ranges (400–1000 and 1000–1700 nm, respectively), have been investigated and set up in order to define quality control logics that could be applied at industrial plant level for polyolefins recycling. The research was developed inside the European FP7 Project W2Plastics “Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste”. The main aim of the project is the separation of pure polyethylene and polypropylene adopting an innovative process, the magnetic density separation (MDS). Spectra of plastic particles and contaminants resulting from post-consumer complex wastes and of virgin polyolefins have been acquired by HSI and by Raman spectroscopy. The classification results obtained applying principal component analysis (PCA) on HSI data have been compared with those obtained by Raman spectroscopy, in order to validate the proposed innovative methodology. Results showed that HSI sensing techniques allow to identify both polyolefins and contaminants. Results also demonstrated that HSI has a great potentiality as a tool for quality control of feed (identification of contaminants in the plastic waste) and of the two different pure polypropylene and polyethylene flow streams resulting from the MDS-based recycling process.     

Pine needles as passive bio-samplers to determine polybrominated diphenyl ethers

Eight polybrominated diphenyl ethers (PBDEs) were determined in pine needles of three species (Pinus halepensis, Pinus pinea and Pinus nigra) collected in the NE Spain in an attempt to use this matrix for the biomonitoring of airborne PBDEs. The method used was based in ultrasonic extraction followed by alumina and Florisil clean-up and determination by gas chromatography coupled to mass spectrometry in negative chemical ionization. Recoveries were between 99% and 138%, limits of detection between 0.011 and 0.070 ng g⁻¹-dw (0.232 ng g⁻¹-dw for BDE 209) and repeatability lower than 13%. PBDE levels ranged between 0.027 ng g⁻¹-dw and 13.04 ng g⁻¹-dw, with predominance of BDE 209, followed by BDEs 47. P. halepensis was the species with the highest PBDE levels and P. nigra, the least, according to their widespread and remote distribution, respectively. The presence of PBDEs in pine needles was attributed to the release of in-use PBDEs, transport through atmosphere and adsorption upon lipid rich pine needles. Given the easy collection of pine needles, its ample distribution and its potential to accumulate airborne contaminants, this matrix is proposed as passive bio-sampler to be used in PBDE monitoring programs.

Capsule

Pine needles can be used to biomonitor airborne PBDEs.     

Evaluation of Cu potential bioavailability changes upon coastal sediment resuspension: an example on how to improve the assessment of sediment dredging environmental risks

Purpose  

Metal bioavailability-based sediment quality analysis, inferred from geochemical partitioning data, may contribute to improve sediment management policies. This is important because decision-making processes should not give similar priorities to sediments offering contrasting environmental risks associated to metal bioavailability. However, current uses of Sediment Quality Guidelines (SQGs) as interpretive tools to support decisions about dredging-related activities have not considered the changes in metal bioavailability upon sediment resuspension.