A Procedure for NEPA Assessment of Selenium Hazards Associated With Mining

This paper gives step-by-step instructions for assessing aquatic selenium hazards associated with mining. The procedure was developed to provide the U.S. Forest Service with a proactive capability for determining the risk of selenium pollution when it reviews mine permit applications in accordance with the National Environmental Policy Act (NEPA). The procedural framework is constructed in a decision-tree format in order to guide users through the various steps, provide a logical sequence for completing individual tasks, and identify key decision points. There are five major components designed to gather information on operational parameters of the proposed mine as well as key aspects of the physical, chemical, and biological environment surrounding it — geological assessment, mine operation assessment, hydrological assessment, biological assessment, and hazard assessment. Validation tests conducted at three mines where selenium pollution has occurred confirmed that the procedure will accurately predict ecological risks. In each case, it correctly identified and quantified selenium hazard, and indicated the steps needed to reduce this hazard to an acceptable level. By utilizing the procedure, NEPA workers can be confident in their ability to understand the risk of aquatic selenium pollution and take appropriate action. Although the procedure was developed for the Forest Service it should also be useful to other federal land management agencies that conduct NEPA assessments, as well as regulatory agencies responsible for issuing coal mining permits under the authority of the Surface Mining Control and Reclamation Act (SMCRA) and associated Section 401 water quality certification under the Clean Water Act. Mining companies will also benefit from the application of this procedure because priority selenium sources can be identified in relation to specific mine operating parameters. The procedure will reveal the point(s) at which there is a need to modify operating conditions to meet environmental quality goals. By recognizing concerns early in the NEPA process, it may be possible for a mining company to match operational parameters with environmental requirements, thereby increasing the likelihood that the permit application will be approved.     

Short-term effects of gaseous pollutants on cause-specific mortality in Wuhan, China

In Asia, limited studies have been published on the association between daily mortality and gaseous pollutants of nitrogen dioxide (NO2), ozone (O3), and sulfur dioxide (SO2). Our previous studies in Wuhan, China, demonstrated long-term air pollution effects. However, no study has been conducted to determine mortality effects of air pollution in this region. This study was to determine the acute mortality effects of the gaseous pollutants in Wuhan, a city with 7.5 million permanent residents during the period from 2000 to 2004. There are approximately 4.5 million residents in Wuhan who live in the city's core area of 201 km2, where air pollution levels are highest, and pollution ranges are wider than the majority of the cities in the published literature. We used the generalized additive model to analyze pollution, mortality, and covariate data. We found consistent NO2 effects on mortality with the strongest effects on the same day. Every 10-microg/m3 increase in NO2 daily concentration on the same day was associated with an increase in nonaccidental (1.43%; 95% confidence interval [CI]: 0.87-1.99%), cardiovascular (1.65%; 95% CI: 0.87-2.45%), stroke (1.49%; 95% CI: 0.56-2.43%), cardiac (1.77%; 95% CI: 0.44-3.12%), respiratory (2.23%; 95% CI: 0.52-3.96%), and cardiopulmonary mortality (1.60%; 95% CI: 0.85-2.35%). These effects were stronger among the elderly than among the young. Formal examination of exposure-response curves suggests no-threshold linear relationships between daily mortality and NO2, where the NO2 concentrations ranged from 19.2 to 127.4 microg/m3. SO2 and O3 were not associated with daily mortality. The exposure-response relationships demonstrated heterogeneity, with some curves showing nonlinear relationships for SO2 and O3. We conclude that there is consistent evidence of acute effects of NO2 on mortality and suggest that a no-threshold linear relationship exists between NO2 and mortality.     

Heavy Metal Contents of the Karasu Creek Sediments, Nigde, Turkey

Heavy metal contamination in sediments of the Karasu spring was investigated in the presented study. In this respect, sediment samples were collected from contaminant sites along the spring starting from the spring water manifestation site, base of the Akkaya dam to the dam exit site. Heavy metal concentrations were determined by X-ray Fluorescence Spectrometer. Cobalt, copper, arsenic, tin, nickel, zinc, cadmium, lead, aluminum, iron, titan, chromium and manganese contents of the Karasu creek sediments are found as 18.30–69.00, 12.40–595.0 5.50–345.3, 5.80–15.1, 10.9–64.1, 28.90–103,300, 4.1–356.2, 7.70–37,840, 13,460–109,400, 11,740–62,900, 22.18–59.04, 41.70–369 and 12.09–3,480 mg/kg, respectively. Results indicate the presence of a contamination in the Karasu creek. All the metal concentrations were found to be exceeding their acceptable limit values. Eutrophication is developed in the Karasu creek and the Akkaya dam. It is thought that heavy metal accumulation in the creek is originated from discharge from mine quarries, industrial and domestic wastes. Protection zones should be defined and all necessary measures must be taken along the Karasu creek.     

The effects of landscape-level disturbance on the composition of Minnesota caddisfly (Insecta: Trichoptera) trophic functional groups: evidence for ecosystem homogenization

Over 300,000 caddisfly specimens representing 249 species were collected from nearly 250 sites throughout Minnesota during 2000 and 2001 to determine the effects of human disturbance on the composition of caddisfly trophic functional groups at the landscape level. Canonical correspondence analysis determined that stream width was the most important variable influencing functional group composition in regions of the state with relatively low disturbance, and that differences in the caddisfly fauna between sizes of streams generally followed trends predicted by the river continuum concept. In regions of the state with moderate disturbance, both stream width and the percentage of disturbed habitat upstream of a site were important variables influencing functional group composition. In highly disturbed regions, no variables corresponded to changes in the composition of caddisfly functional groups. Instead, ecosystems were homogeneous: fine-particle filtering collectors dominated in all sizes of streams. The observed aquatic ecosystem homogenization is attributed mostly to input of fine-particle organic and inorganic sediment from extensive agriculture.     

Northern Idaho House Dust and Soil Lead Levels Compared to the Bunker Hill Superfund Site

House dust has been identified as a major exposure medium for lead (Pb) in children. High levels of Pb in soil and house dust have been recorded at the Bunker Hill Superfund Site (BHSS) in northern Idaho, an historic mining and smelting district. Soil and dust remediation at the site was required; however, regional background soil and dust Pb levels had not been well characterized. The objective of this survey was to determine background house dust Pb levels and to compare those levels with concentrations, and dust and Pb loading rates measured at the BHSS. Soil and house dust samples were collected in five towns demographically similar to the BHSS but unaffected by the mining industry. The background concentrations and loading rates were significantly lower than those observed at the site. House age was a significant factor affecting background soil and house dust Pb concentrations and loading rates.     

Pesticide Residues in Bovine Milk from a Predominantly Agricultural State of Haryana, India

One hundred forty seven samples of bovine milk were collected from 14 districts of Haryana, India during December 1998–February 1999 and analysed for the presence of organochlorine pesticide (OCPs) residues. ∑HCH, ∑DDT, ∑endosulfan and aldrin were detected in 100%, 97%, 43% and 12% samples and with mean values of 0.0292, 0.0367, 0.0022 and 0.0036 μg/ml, respectively. Eight percent samples exceeded the maximum residue limit (MRL) of 0.10 mg/kg as recommended by WHO for ∑HCH, 4% samples of 0.05 mg/kg for α-HCH, 5% samples of 0.01 mg/kg for γ-HCH, 26% samples of 0.02 mg/kg for β-HCH as recommended by PFAA and 24% samples of 0.05 mg/kg as recommended by FAO for ∑DDT. Concentrations of β-HCH and p,p′-DDE were more as compared to other isomers and metabolites of HCH and DDT.     

Deficit analysis: service capacity assessment and planning in developing countries – case study in the Philippines

Current demand analysis methods do not formally cover the case of chronic deficits in quantity or quality of water and sanitation services. These services include drinking water supply (DWS), wastewater and sewage treatment (WST), and municipal solid waste management (MSW). Formal analysis of this case would, at minimum, define the deficit state and evaluate appropriate options for reducing it. This paper proposes for a formal analytical model for municipal sanitation systems (MSS) that operate with deficits in at least one of the constituent services of DWS, WST, or MSW. The model introduces definitions and notation for describing the deficit state for conducting demand analysis on municipal sanitation systems. This model of demand analysis for systems with chronic deficits will hereinafter be referred to as deficit analysis. A case study for Bacoor, Philippines is presented as an example.     

Relation of waste generation and composition to socio-economic factors: a case study

To develop an effective waste management strategy for a given region, it is important to know the amount of waste generated and the composition of the waste stream. Past research has shown that the amount of waste generated is proportional to the population and the average mean living standards or the average income of the people. In addition, other factors may affect the amount and composition of waste. These are climate, living habits, level of education, religious and cultural beliefs, and social and public attitudes. This paper presents the findings of a study carried out in a suburban municipal area in Sri Lanka to determine the solid waste generation rate and waste composition based on field surveys and to determine the related socio-economic factors. A database was developed that included information on the quantity and composition of waste generated in a sample of households in the study area over a time period. The collected data was analysed to relate waste generation and composition data to various socio-economic factors. Over 400 sample households were selected for the study using a stratified random sampling methodology based on municipal wards and property values. A technique that considers both the number of households in a particular income group (property value range) and the standard deviation of property values within a given income group was used to determine the appropriate sample size for each municipal ward. Through category and regression analyses, the quantities of waste and waste composition were related to several socio-economic factors. The paper describes the basis for the sample selection, the methodology adopted for data collection, the socio-economic parameters used for the analysis, and the relationships developed from the analysis.     

Preparation and evaluation of candidate certified reference materials (CRMs) for nutrients in seawater

Certified reference materials (CRMs) are an essential part of the quality assurance (QA) necessary for the reliable analytical measurement of nutrients in seawater. The CRMs currently available for these analyses are not matrix matched to marine samples. QUASIMEME routinely produces test materials for the nutrients in seawater and nutrients in estuarine water and low-salinity open water Laboratory Performance Studies (LPS) that are both homogeneous and stable. QUASIMEME, in conjunction with Eurofins Scientific, Denmark have produced two reference materials (RMs). The homogeneity testing and preliminary stability studies were carried out by QUASIMEME, and the results are presented in this article. Participants of the QUASIMEME LPS who demonstrated satisfactory long-term performance for the analysis of nutrients in seawater and nutrients in estuarine water and low-salinity open water were invited to take part in the certification exercise. Twenty laboratories returned data, a summary of which is also presented. The certification and long-term stability testing and additional data analysis were carried out by Eurofins Scientific, Denmark, and are outwith the scope of this article and not reported here. Eurofins Scientific, Denmark have marketed these RMs as part of their range of VKI Reference Materials (further information is available from eurofins@eurofins.dk).     

Effects of marine biofouling on gas sensor membrane materials

The use of underwater gaseous sensors has increased rapidly in the last 10 years. The majority of such sensors employ a thin membrane through which the gas diffuses. These sensors are potentiometric gas-sensing probes and essentially they are ion-selective electrodes. The deployment time of these membranes is curtailed by the formation of biofouling on the membrane leading to erroneous results. The physical properties of a variety of commonly used membranes were investigated using SEM and AFM. This showed that there were differences in topography between the PTFE membranes, such as pore sizes and surface roughness, which may be attributed to the manner in which they are manufactured. The pore size of the PTFE membranes varied greatly, ranging from circular pores with a diameter of 500 nm to elongated pores measuring 1 x 22 microm. The contact angle of each membrane showed that they were all hydrophobic. The amount of fouling on each was also observed and its affect on oxygen diffusion was monitored. Fouling slowed down the response of the instrument and caused reduced diffusion through the membranes. The amount of fouling varied between the membranes with the YSI membrane fouling least. Some of the membranes tested did foul less than others and there could be lifetime advantages of choosing a membrane with a smoother surface and a small pore size.