Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.     

Analytical solution for Joule–Thomson cooling during CO2 geo-sequestration in depleted oil and gas reservoirs

Mathematical tools are needed to screen out sites where Joule–Thomson cooling is a prohibitive factor for CO₂ geo-sequestration and to design approaches to mitigate the effect. In this paper, a simple analytical solution is developed by invoking steady-state flow and constant thermophysical properties. The analytical solution allows fast evaluation of spatiotemporal temperature fields, resulting from constant-rate CO₂ injection. The applicability of the analytical solution is demonstrated by comparison with non-isothermal simulation results from the reservoir simulator TOUGH2. Analysis confirms that for an injection rate of 3 kg s^?1 (0.1 MT yr^?1) into moderately warm (>40 °C) and permeable formations (>10^?14 m² (10 mD)), JTC is unlikely to be a problem for initial reservoir pressures as low as 2 MPa (290 psi).     

One century sedimentary records of polycyclic aromatic hydrocarbons, mercury and trace elements in the Qinghai Lake, Tibetan Plateau

Sediments from a remote lake of northeastern Tibetan Plateau were analyzed for polycyclic aromatic hydrocarbons (PAHs) and trace metals. USEPA priority PAHs, ranged from 11 in 1860 to 279 ng g⁻¹ in 2002, while, the deposition fluxes were in the range of 0.2-11.4 ng cm⁻² yr⁻¹. Similarly, from 1860 to 2002, an increased trend of Hg flux was observed (0.5-3.2 ng cm⁻² yr⁻¹). Remarkable increase of PAHs and Hg concentration began from 1970, nearly the same period of the “Reform and Open” Policy had been embarked (1978) in China. Good correlations were found between concentrations of Pb, Zn, Cd, As, Hg, and PAHs, which suggested the sources of these chemicals in the sediment is analogous, likely from anthroprogenic sources. Based on isomer ratios, PAHs in core were dominantly from the incomplete combustion of coal. Owing to the proximity to dust source area (Qaidam Basin) and the close association between PAHs, Hg, Pb, and particle matters, atmospheric dust-transport and deposition might be the main pathways that pollutants enter into Qinghai Lake.     

Chemical solutions for greywater recycling

Greywater recycling is now accepted as a sustainable solution to the general increase of the fresh water demand, water shortages and for environment protection. However, the majority of the suggested treatments are biological and such technologies can be affected, especially at small scale, by the variability in strength and flow of the greywater and potential shock loading. This investigation presents the study of alternative processes, coagulation and magnetic ion exchange resin, for the treatment of greywater for reuse. The potential of these processes as well as the influence of parameters such as coagulant or resin dose, pH or contact time were investigated for the treatment of two greywaters of low and high organic strengths. The results obtained revealed that magnetic ion exchange resin and coagulation were suitable treatment solutions for low strength greywater sources. However, they were unable to achieve the required level of treatment for the reuse of medium to high strength greywaters. Consequently, these processes could only be considered as an option for greywater recycling in specific conditions that is to say in case of low organic strength greywater or less stringent standards for reuse.     

A sensitive and robust method for the determination of alkylphenol polyethoxylates and their carboxylic acids and their transformation in a trickling filter wastewater treatment plant

This paper presents a method for the determination of alkylphenols, alkylphenol polyethoxylates (APEO) and alkylphenol ethoxycarboxylates (APEC) in the aqueous and particulate phase of wastewater samples. Quantification was achieved by liquid chromatography-tandem mass spectrometry. The sensitivity of the method is demonstrated by low detection limits, in the dissolved phase 1.2-9.6ngl(-1) for alkylphenol, AP(1-3)EO and APEC and 0.1-4.1ngl(-1) for longer chain alkylphenol polyethoxylates. The method detection limit for particulate phase samples ranged from 6 to 60ngg(-1) for AP, AP(1-3)EO and APEC; with the longer chain APEO being from 0.5 to 20ngg(-1). Matrix effects were noted in complex matrix rich samples. There was a distinct change in the distribution of alkylphenol ethoxylates during biological treatment of the wastewater, with the major biotransformation products observed being carboxylated derivatives at concentrations of up to 1768ngl(-1). Shorter chain APEO were present in higher proportions in the suspended solids, due to their higher affinity to particulate matter compared to the long-chain oligomers.     

Fine particulate matter emissions inventories: comparisons of emissions estimates with observations from recent field programs

Emissions inventories of fine particulate matter (PM2.5) were compared with estimates of emissions based on data emerging from U.S. Environment Protection Agency Particulate Matter Supersites and other field programs. Six source categories for PM2.5 emissions were reviewed: on-road mobile sources, nonroad mobile sources, cooking, biomass combustion, fugitive dust, and stationary sources. Ammonia emissions from all of the source categories were also examined. Regional emissions inventories of PM in the exhaust from on-road and nonroad sources were generally consistent with ambient observations, though uncertainties in some emission factors were twice as large as the emission factors. In contrast, emissions inventories of road dust were up to an order of magnitude larger than ambient observations, and estimated brake wear and tire dust emissions were half as large as ambient observations in urban areas. Although comprehensive nationwide emissions inventories of PM2.5 from cooking sources and biomass burning are not yet available, observational data in urban areas suggest that cooking sources account for approximately 5-20% of total primary emissions (excluding dust), and biomass burning sources are highly dependent on region. Finally, relatively few observational data were available to assess the accuracy of emission estimates for stationary sources. Overall, the uncertainties in primary emissions for PM2.s are substantial. Similar uncertainties exist for ammonia emissions. Because of these uncertainties, the design of PM2.5 control strategies should be based on inventories that have been refined by a combination of bottom-up and top-down methods.