Kinetics of phenanthrene desorption from activated carbons to water

We determined the kinetics of phenanthrene desorption from three activated carbons to water using Tenax beads as an infinite sink for organic compounds in water. Desorption kinetic data very well fitted a biphasic kinetic model based on the presence of two different adsorption sites, viz. low-energy sites and high-energy sites. Rate constants for desorption to water from these two types of sites in the three activated carbons did not reveal a relation with activated carbon grain size. These rate constants were comparable to those for desorption of various organic compounds from hard carbon in various sediments.     

Environmental assessment of solid waste landfilling technologies by means of LCA-modeling

By using life cycle assessment (LCA) modeling, this paper compares the environmental performance of six landfilling technologies (open dump, conventional landfill with flares, conventional landfill with energy recovery, standard bioreactor landfill, flushing bioreactor landfill and semi-aerobic landfill) and assesses the influence of the active operations practiced on these performances. The environmental assessments have been performed by means of the LCA-based tool EASEWASTE, whereby the functional unit utilized for the LCA is "landfilling of 1ton of wet household waste in a 10m deep landfill for 100 years". The assessment criteria include standard categories (global warming, nutrient enrichment, ozone depletion, photo-chemical ozone formation and acidification), toxicity-related categories (human toxicity and ecotoxicity) and impact on spoiled groundwater resources. Results demonstrate that it is crucially important to ensure the highest collection efficiency of landfill gas and leachate since a poor capture compromises the overall environmental performance. Once gas and leachate are collected and treated, the potential impacts in the standard environmental categories and on spoiled groundwater resources significantly decrease, although at the same time specific emissions from gas treatment lead to increased impact potentials in the toxicity-related categories. Gas utilization for energy recovery leads to saved emissions and avoided impact potentials in several environmental categories. Measures should be taken to prevent leachate infiltration to groundwater and it is essential to collect and treat the generated leachate. The bioreactor technologies recirculate the collected leachate to enhance the waste degradation process. This allows the gas collection period to be reduced from 40 to 15 years, although it does not lead to noticeable environmental benefits when considering a 100 years LCA-perspective. In order to more comprehensively understand the influence of the active operations (i.e., leachate recirculation, waste flushing and air injection) on the environmental performance, the time horizon of the assessment has been split into two time periods: years 0-15 and 16-100. Results show that if these operations are combined with gas utilization and leachate treatment, they are able to shorten the time frame that emissions lead to environmental impacts of concern.     

Recovery agenda for sustainable development post COVID-19 at the country level: developing a fuzzy action priority surface

Environment, Development and Sustainability - As a response to the urgent call for recovery actions against the COVID-19 crisis, this research aims to identify action priority areas...     

A diagnostic evaluation of modeled mercury wet depositions in Europe using atmospheric speciated high-resolution observations

This study is part of the Global Mercury Observation System (GMOS), a European FP7 project dedicated to the improvement and validation of mercury models to assist in establishing a global monitoring network and to support political decisions. One key question about the global mercury cycle is the efficiency of its removal out of the atmosphere into other environmental compartments. So far, the evaluation of modeled wet deposition of mercury was difficult because of a lack of long-term measurements of oxidized and elemental mercury. The oxidized mercury species gaseous oxidized mercury (GOM) and particle-bound mercury (PBM) which are found in the atmosphere in typical concentrations of a few to a few tens pg/m³ are the relevant components for the wet deposition of mercury. In this study, the first European long-term dataset of speciated mercury taken at Waldhof/Germany was used to evaluate deposition fields modeled with the chemistry transport model (CTM) Community Multiscale Air Quality (CMAQ) and to analyze the influence of the governing parameters. The influence of the parameters precipitation and atmospheric concentration was evaluated using different input datasets for a variety of CMAQ simulations for the year 2009. It was found that on the basis of daily and weekly measurement data, the bias of modeled depositions could be explained by the bias of precipitation fields and atmospheric concentrations of GOM and PBM. A correction of the modeled wet deposition using observed daily precipitation increased the correlation, on average, from 0.17 to 0.78. An additional correction based on the daily average GOM and PBM concentration lead to a 50 % decrease of the model error for all CMAQ scenarios. Monthly deposition measurements were found to have a too low temporal resolution to adequately analyze model deficiencies in wet deposition processes due to the nonlinear nature of the scavenging process. Moreover, the general overestimation of atmospheric GOM by the CTM in combination with an underestimation of low precipitation events in the meteorological models lead to a good agreement of total annual wet deposition besides the large error in weekly deposition estimates. Moreover, it was found that the current speciation profiles for GOM emissions are the main factor for the overestimation of atmospheric GOM concentrations and might need to be revised in the future. The assumption of zero emissions of GOM lead to an improvement of the mean normalized bias for three-hourly observations of atmospheric GOM from 9.7 to 0.5, Furthermore, the diurnal correlation between model and observation increased from 0.01 to 0.64. This is a strong indicator that GOM is not directly emitted from primary sources but is mainly created by oxidation of GEM.     

Pregnancy outcome after transcervical cvs with a flexible biopsy forceps: Evaluation of risk factors

The pregnancy outcome of 1936 women who had transcervical chorionic villus sampling (CVS) with a flexible biopsy forceps was evaluated. Follow-up until 4 weeks after delivery was 99.4 per cent. Various patient- and procedure-related risk factors for spontaneous loss (fetal or neonatal death) were analysed using stepwise logistic regression analysis. The overall spontaneous loss rate was 4.5 per cent. Factors found to be significantly associated with spontaneous loss were quantity of villi ≤ 15 mg (relative risk (RR) 2.13), a history of first-trimester miscarriage (RR 1.87) or delivery between 16 and 27 weeks (RR 3.87), cervical culture positive for anaerobes (RR 4.52) or group B streptococcus (RR 3.62), post-procedural bleeding >3 days (RR 1.99), and multiple insertions (RR 2.64). Significant differences in loss rates between individual operators were found. A learning effect was not present. There were no infants born with terminal transversal limb anomalies in our series.     

Could the predation risk hypothesis explain large-scale spatial sexual segregation in fallow deer (<Emphasis Type="Italic">Dama dama</Emphasis>)?

Large-scale spatial segregation was assessed by means of radio-telemetry in 48 fallow deer studied for 4 years. Three hypotheses have traditionally been used to explain sexual segregation: (1) the predation risk hypothesis, (2) the forage selection hypothesis, (3) the activity budget hypothesis. The first of these seems to be a valid explanation of large-scale segregation in fallow deer at San Rossore, where the use by the two sexes of areas characterized by intense anthropic disturbance, during the day, was compared with other areas not affected by human pressure. Males showed a high use of disturbed areas, both during the day and the night, with the exception of the rutting period, when they reached more remote areas to mate. Females frequented disturbed areas only during the night, with the exception of the birth period, when sexual segregation peaked because females never used these areas, not even during the night. The forage selection hypothesis was invalid on a large scale, considering that no differences between the degree of day and night sexual segregation were to be expected. However, the predation risk hypothesis seems not to be a valid explanation of small-scale sexual segregation, when further subdivisions of disturbed areas are considered, because sexes proved to be segregated also during the night in the area they both used. This emphasizes both the importance of scale in understanding ecological processes, since a combination of many different factors may be responsible for the evolution of sexual segregation in ungulates, and the importance of human pressure in influencing deer behaviour.Communicated by T. Czeschlik     

Heavy metals in top core sediments from the southern Campania shelf (Italy): Hints to define large-scale geochemical backgrounds

The results of a geochemical survey carried out on the southern Campania shelf (southern Italy) are illustrated, offering a tempting opportunity to discuss the statement and definition of regional geochemical backgrounds for selected heavy metals. A total of 104 top core sediments, collected on average 1.5 km from one another and covering a shelf area of about 1300 km², were analysed for grain size, organic carbon content (OC), and heavy-metal (As, Al, Fe, Cd, V, Cr, Zn, Cu, Ni, Hg, and Pb) concentrations. The characteristics of the area, scarcely influenced by industrial activities, and the extensive data set, make this study suitable for an appropriate multivariate and spatial geostatistical methodologies used for i) a reliable definition of large-scale marine sediments' geochemical backgrounds and ii) an accurate discrimination of different geological controls on trace-element distribution patterns. Enrichment factors estimated with respect to both the average shale composition and the weighted average metal concentrations measured in inland soils rule out significant anthropogenic inputs. A spatial-geostatistics approach (kriging of spatial component based on an accurate implementation of variographic surveying) was applied, and this is proposed as an appropriate quantitative methodology to define the geochemical backgrounds for the different heavy metals. Two nested spatial structures were identified for some of the heavy metals, thus allowing clear identification of local and regional geochemical controls related to the different spatial variability of grain size.