Evaluation of the effect of long-range transport of air pollutants on coastal atmospheric monitoring sites in and around Taiwan

Long-range transport of pollution outflow from Asian mainland has been noticed and expected to play a significant role in Pacific background. Since 1993 the Taiwanese Environmental Protection Administration (TEPA) is conducting ground-based observations of various particulate and gaseous pollutants at 74 monitoring stations in Taiwan. One of these stations, Heng-Chun at the south coast of Taiwan can be considered as a background station with only negligible amounts of local pollution, and another one, Wan-Li at the north coast, predominantly receives air that has not passed over Taiwan, so that background air can be analysed by means of sectorisation. In this work, the sectorised 13-year time series of measurements of CO, SO₂, O₃, NO_x and PM₁₀, from the Wan-Li station are presen and compared to data from the Heng-Chun station and another TEPA background station off the coast of mainland China, Ma-Zu. The CO and O₃ measurements are also compared to data from the Yonaguni station, a Pacific island site, part of the Global Atmospheric Watch (GAW) network.The similarity of the sectorised data from the Wan-Li station with the data of the other station indicates that atmospheric measurements from the Wan-Li site can be used to make inferences about trends in western Pacific background air pollution and the effect of long-range transport of pollutants. The measurement time series from 1993 to 2006 do not indicate a significant trend in the monthly mean O₃ concentrations in accordance with other research about ozone in tropical latitudes. An increasing trend in CO concentrations of 2.8% per annum is observed between 1999 and 2006 for long-range transport to northern Taiwan, and a doubling of the SO₂ and NO_x concentrations observed at the Wan-Li and Heng-Chun sites within the period 2001–2006. SO₂ concentrations are found to quadruple at Ma-Zu within the same period. The data suggest that pollution from the Asian mainland enhances significantly the background air pollution over the Pacific.     

Carbon isotope analysis for source identification of atmospheric formaldehyde and acetaldehyde in Dinghushan Biosphere Reserve in South China

Formaldehyde and acetaldehyde are two most abundant carbonyls in ambient air. Biogenic emission has been proposed as a significant source other than anthropogenic emissions and atmospheric secondary formation. Here at a forest site in South China, the carbon isotopic compositions of formaldehyde and acetaldehyde emitted from leaves of three tree species (Litsea rotundifolia, Canarium album and Castanea henryi) were measured in comparison with the bulk carbon isotopic compositions of tree leaves. δ¹³C data of the emitted aldehydes (from ?31‰ to ?46‰) were quite different for tree species, which were all more depleted in ¹³C than the tree-leaf bulk δ¹³C values (from ?27‰ to ?32‰). Formaldehyde in ambient air at the forest site had δ¹³C values different from those of leaf-emitted formaldehyde, indicating other sources for ambient formaldehyde apart from direct emission from leaves, most probably the photooxidation of biogenic hydrocarbon like isoprene and monoterpene. The δ¹³C differences of acetaldehyde between ambient data and those of tree leaves emission were less than 1‰, implying direct biogenic emission as the dominant source.     

Single particle mass spectrometry of oxalic acid in ambient aerosols in Shanghai: Mixing state and formation mechanism

Oxalic acid in individual aerosol particles was measured using single particle aerosol time-of-flight mass spectrometry (ATOFMS) in the summer of 2007 in Shanghai, China. Oxalate was found in 3.4% of total particles with diameters in the range of 0.2 – 2.0 μm. Size, chemical composition and hourly temporal counts of single particles that contained oxalic acid were measured. The predominant types of oxalate-containing particles were characterized to distinguish the primary and secondary sources of oxalic acid. Biomass burning was revealed as a major primary source of oxalic acid which contributed more than 20% of the oxalate-containing particles. Evidences for two different formation pathways of oxalic acid were observed in our experiment. The number fraction of oxalate-containing particles correlated with that of sulfate particles and the changes of air parcel backward trajectories, suggesting that in-cloud processing played important roles in oxalic acid formation. The diurnal patterns of dust and sea salt particle counts fitted well with the ambient relative humidity variation, suggesting that heterogeneous reactions occurring in hydrated/deliquesced aerosols also contributed to the production of oxalic acid.     

An important pathway for ozonolysis of alpha-pinene and beta-pinene in aqueous phase and its atmospheric implications

The aqueous ozonolysis of α-pinene and β-pinene was conducted under simulated tropospheric conditions at different pHs and temperatures. Three kinds of products, peroxides, carbonyl compounds, and organic acids, were well characterized, and the detection of these products provides effective evidence for understanding the atmospheric aqueous reaction pathway. We have two interesting findings: (1) the unexpected formation of methacrolein (MACR), with a yield of ～40%, in the α-pinene–O₃ aqueous reaction indicates a potentially new SOA formation pathway, because MACR is one of the important precursors of SOA; and (2) the surprisingly high yields of H₂O₂, ～60% for the α-pinene–O₃ reaction and ～100% for the β-pinene–O₃ reaction, indicates that H₂O₂ can be a significant contributor to the origin and transformation of oxidants in the atmosphere, especially in the humid regions. Moreover, we have determined the rate constant for aqueous reaction between MACR and H₂O₂ in pH 2 to 7 and obtained its upper limit as 0.13 M L^?1 s^?1. A mechanism concerning the formation of the species mentioned above is proposed, and it differs from that in the gas-phase reaction. We suggest that water plays a key role in the mechanism, by participating in the reactions as a direct reactant and by removing the excess energy of intermediates formed in the reactions.     

Concentrations,seasonal variations,and transport of carbonaceous aerosols at a remote Mountainous region in western China

Carbonaceous aerosol concentrations were determined for total suspended particle samples collected from Muztagh Ata Mountain in western China from December 2003 to February 2006. Elemental carbon (EC) varied from 0.004 to 0.174 μg m^?3 (average = 0.055 μg m^?3) while organic carbon (OC) ranged from 0.12 to 2.17 μg m^?3 and carbonate carbon (CC) from below detection to 3.57 μg m^?3. Overall, EC was the least abundant fraction of carbonaceous species, and the EC concentrations approached those in some remote polar areas, possibly representing a regional background. Low EC and OC concentrations occurred in winter and spring while high CC in spring and summer was presumably due to dust from the Taklimakan desert, China. OC/EC ratios averaged 10.0, and strong correlations between OC and EC in spring–winter suggest their cycles are coupled, but lower correlations in summer–autumn suggest influences from biogenic OC emissions and secondary OC formation. Trajectory analyses indicate that air transported from outside of China brings ～0.05 μg m^?3 EC, ～0.42 μg m^?3 OC, and ～0.10 μg m^?3 CC to the site, with higher levels coming from inside China. The observed EC was within the range of loadings estimated from a glacial ice core, and implications of EC-induced warming for regional climate and glacial ice dynamics are discussed.     

Landfill site selection using spatial information technologies and AHP: A case study in Beijing,China

Site selection is an important and necessary issue for waste management in fast-growing regions. Because of the complexity of waste management systems, the selection of the appropriate solid waste landfill site requires consideration of multiple alternative solutions and evaluation criteria. Based on actual conditions of the study area, we considered economic factors, calculated criteria weights using the analytical hierarchy process (AHP), and built a hierarchy model for solving the solid waste landfill site-selection problem in Beijing, China. A geographic information system (GIS) was used to manipulate and present spatial data. All maps are graded from 1 (lowest suitability) to 5 (highest suitability) using spatial information technologies. The candidate sites were determined by aggregation based on the criteria weights. The candidate sites are divided by ‘best’, ‘good’ and ‘unsuitable’ landfill areas. Best landfill areas represent optimal sites; good landfill areas can be used as back-up candidate sites. Our work offers a siting methodology and provides essential support for decision-makers in the assessment of waste management problems in Beijing and other rapidly developing cities in developing countries.     

Changes in negative air ions concentration under different light intensities and development of a model to relate light intensity to directional change

The purpose of this research was to determine changes in negative air ion (NAI) concentrations produced by plants grown under different light intensities. NAI concentrations were observed and analyzed in an outdoor green space with five plant species (Aloe arborescens, Clivia miniata, Chlorophytum comosum, Opuntia brunnescens, Crassula portulacea) and A. arborescens was then grown under controlled-light conditions in an enclosed space for the subsequent light intensity experiment.     

Gas/particle partitioning of atmospheric PCDD/Fs in a satellite town in Eastern China

Gas/particle partitioning of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air was investigated in a satellite town in Eastern China from April 2007 to January 2008 comprehending large temperature variations (from 3 to 34 °C, daily average). Molecular weight, molecular structure and ambient temperatures are the three major factors that govern the gas/particle partitioning of atmospheric PCDD/Fs throughout the year. Generally, good agreements were obtained (except for winter) between measured particulate fractions and theoretical estimates of both the Junge–Pankow adsorption model and Harner Bidleman absorption model using different sets of subcooled liquid vapor pressure and octanol–air partition coefficient (K_oa), respectively. Models utilizing estimates, derived from gas chromatographic retention indices (GC-RIs), are more accurate than that of entropy-based. Moreover, during winter, the K_oa-based model using the GC-RIs approach performs better on lower chlorinated PCDD/Fs than that of -based. Furthermore, possible sources of mismatch between measured and predicted values in winter (3–7 °C) were discussed. Gas adsorption artifact was demonstrated to be of minor importance for the phenomena observed. On the other hand, large deviations of slopes (m_r) and intercepts (b_r) in logK_p vs. plots from theoretical values are observed in the literature data and these are found to be linearly correlated with ambient temperatures (P<0.001) in this study. This indicates that the non-equilibrium partitioning of PCDD/Fs in winter may be significantly influenced by the colder temperatures that may have slowed down the exchange between gaseous and particulate fractions.     

Endosulfan in China 1—gridded usage inventories

Background, aim, and scope  Endosulfan, an organochlorine pesticide (OCP), is genotoxic in mammalian cells and generally considered to be toxic and classified by the World Health Organization and the US Environmental Protection Agency as priority pollutants and a nominator for inclusion in a future iteration of the persistent organic pollutants treaty. Endosulfan is a currently used pesticide and still being used worldwide. The general trend of total global endosulfan use has increased continuously since the first year when this pesticide was applied. It is critical to create national endosulfan usage/emission inventories for China to carry out source–receptor relation analysis, risk assessment, and other research related to endosulfan in this country. Chinese inventories have been published for some OCPs, such as technical HCH and lindane, DDT, and chlordane; for endosulfan, however, there has not been any usage inventory available on any scales (national or provincial), although endosulfan has been widely used since 1994 in this country. This is the first part of the work. The goal of this paper is to quantify the historical production and usage of endosulfan in China and to compile gridded historical usage inventories of endosulfan for this country. Based on these usage inventories, emission and residue inventories will be created, which is the goal of the second part of the work. Materials and methods  Due to the lack of national production and usage information of endosulfan in China, a method to estimate the use of endosulfan was developed. First, information of crops on which endosulfan is applied and average endosulfan use and annual application frequencies of endosulfan on these crops were collected. Secondly, usage of endosulfan on each crop was estimated using the national cropland area for each province from Chinese government reports. Finally, with the help of GIS (geographic information system), the usage data of this insecticide was allocated to a grid system, with a 1/4° longitude by 1/6° latitude resolution, with a size for each grid cell of approximately 25 km by 25 km. Results and discussion  The use of endosulfan in agriculture in China started on cotton in 1994, and on wheat, tea, tobacco, apples, and other fruits in 1998. Endosulfan usage on cotton, wheat, tea, tobacco, and apples in China has been estimated to be approximately 25,700 t between 1994 and 2004. The province with the highest usage of endosulfan is Henan Province, with a total usage reaching 4,000 t, followed by the uses in Xinjiang Autonomous Region (3,200 t), Shandong Province (3,000 t), Hebei Province (2,100 t), and Anhui Province (1,900 t). Gridded usage inventories of endosulfan at a 1/4° longitude by 1/6° latitude resolution have been created, which indicate that the intensive endosulfan use was in the south of Hebei Province, west of Shandong Province, east of Henan Province, north of Anhui Province, east of Jiangsu Province, and some areas in Yunnan Province and Xinjiang Autonomous Region. General agreement has been found between the usage data from our estimation and the small amount of usage data published in China. Conclusions  This is the first national gridded endosulfan usage inventory produced for China. The annual applications of endosulfan from 1994 to 2004 in China were estimated based on the total areas of major crops, on which endosulfan was applied, and spatial distribution of the application was generated at provincial and prefecture levels. With the help of GIS, endosulfan usage based on prefecture was transferred to a 1/4° longitude by 1/6° latitude gridding system. The satisfaction of the inventories was supported by the consistence between the estimation of the annual usage and the reported annual production of endosulfan. Recommendations and perspectives  This gridded endosulfan usage inventory created in this study will be improved upon availability of new information of endosulfan. The usage inventories can be used to create gridded emission and residue inventories for this insecticide. It is believed that this work will pave the way for further endosulfan studies in China and beyond.     

Technological Progress, Structural Change and China＇s Energy Efficiency

China has witnessed rapid economic development since 1978, and during the time, energy production and consumption developed at a tremendous speed as well. Energy efficiency which can be measured by energy consumption per unit of GDP, however, experienced continuous decrease. Theoretically, the change of energy efficiency can be attributed to industry structural change and technological change. In order to explain the transformation of Chinese energy efficiency, we adopt logarithmic mean Divisia index techniques to decompose changes in energy intensity in the period of 1994-2005. We find that technological change is the dominant contributor in the decline of energy intensity, but the contribution has declined since 2001. The change in industry structure has decreased the energy intensity before 1998, but raised the intensity after 1998. Decomposed technological effects for all sectors indicate that technological progresses in high energy consuming industries such as raw chemical materials and chemical products, smelting and pressing of ferrous metals, manufacture of non-metallic mineral products and household contribute are the principal drivers of China＇s declining energy intensity.