Removal of heavy metal ions from aqueous system by ion-exchange and biosorption methods

Environmental Chemistry Letters - Pollution due to heavy metals is currently a serious problems affecting water bodies. The removal of heavy metals is of great concern due to their toxicity at...     

Comparing the nutrient changes,heavy metals,and genotoxicity assessment before and after vermicomposting of thermal fly ash using Eisenia fetida

Environmental Science and Pollution Research - Fly ash (FA) is available in an unstable state and can be ameliorated by vermicomposting. The different ratios of FA viz (FA10, FA15, FA20, FA25,...     

Immobilisation of beryllium in solid waste (red-mud) by fixation and vitrification

The objective of this study was to obtain information on the immobilization of beryllium (Be) in solid waste generated in the extraction process of beryllium from its ore, Beryl. This solid waste, termed red-mud, contains oxides of iron, aluminium, calcium, magnesium and beryllium. The red-mud waste contains beryllium at levels above the permissible limit, which prevents its disposal as solid waste. The total beryllium content in the red-mud analysed showed value ranging from 0.39 to 0.59% Be The studies showed that 50% of the total beryllium in red-mud can be extracted by water by repeated leaching over a period of 45 days. The cement mix, casting into cement blocks, was subjected to leachability studies over a period of 105 days and immobilization factor (IF factor) was determined. These IF values, of the order of 102, were compared with those obtained by performing leachability study on vitrified red-mud masses produced at different temperature conditions. Direct heating of the red-mud gave the gray coloured, non-transparent vitreous mass (as 'bad glass') showed effective immobilisation factor for beryllium in red-mud of the order of 10(4).     

Characterization of saccharides and other organic compounds in fine particles and the use of saccharides to track primary biologically derived carbon sources

A total of 134 aerosol samples (d_p < 2.5 μm) were collected at one rural site and one urban site in Texas from November 2005 to July 2006 to investigate the different sources that contribute to the ambient levels of different compounds. In particular, saccharide compounds were studied as potential tracers to track aerosols of biologically derived origin. The ambient concentration, seasonal variation, and urban/rural comparison of major saccharides and other organic compounds including normal alkanes, hopanes, and carboxylic acids were determined and analyzed relative to characterizing sources of PM2.5. Saccharides, together with other known molecular markers, were analyzed by a positive matrix factorization model and eight source factors were isolated that provide meaningful interpretation of aerosol sources. Three isolated factors were characterized by the dominance of different saccharide compounds and were attributed to wood smoke, sucrose rich bio-aerosols, and fungal spore derived bio-aerosols. It was estimated that wood smoke and primary biologically derived carbon sources contributed 22% and 14% to the measured ambient PM2.5 mass at San Augustine and 16% and 5% to the measured ambient PM2.5 mass at Dallas. The relative PM contribution from other resolved sources were also calculated.     

Energy-dispersive X-ray fluorescence spectrometry technique as an efficient monitoring tool for mercury contamination

This paper illustrates the useful early-warning role of the energy-dispersive X-ray fluorescence technique against a potential health hazard being posed by dumping effluents from an industrial unit involved in the manufacture of lead-batteries, in a nearby water-canal used for irrigation purposes by surrounding villages. These effluents were shown to contain mercury at a potentially unsafe level, resulting in timely initiation of necessary preventive measures. The standard fundamental parameter method was invoked for a quantitative estimation of the mercury (Hg) concentration. In addition, L-series (rather than the usual K-series) X-rays were used for excitation, mainly on account of the type of the available excitation source.     

Crystalline hydrous ferric oxide: an adsorbent for chromium(VI)-contaminated industrial wastewater treatment.

Synthetic crystalline hydrous ferric oxide (CHFO) (particle size 0.14 to 0.29 mm) has been used systematically for adsorptive chromium(VI) removal from contaminated water. Batch experiments were performed as a function of pH, contact time, solute concentration, and regeneration of adsorbents. Column experiments were performed for breakthrough points in the presence and absence of other ions and treatment of industrial effluent. The optimum pH range was 2.0 to 4.0. The adsorption kinetic data could be described well by both second-order and pseudo-first-order models. The isotherm adsorption data at 30 +/- 2 degrees C obeyed the Langmuir model best. The monolayer adsorption capacity was 35.7 mg/g. Chromium(VI)-rich CHFO could be regenerated up to 89 +/- 1% with 2.0 M sodium hydroxide. Regenerated column reuse showed a decrease (10 to 12%) in breakthrough capacity. Finally, the CHFO- (dried at 300 degrees C) packed column was used for the recovery (98.5 +/- 1.0%) of chromium(VI) from contaminated industrial waste effluent of Hindustan Motor Limited (Hooghly, West Bengal, India).     

Does environmental compliance pay?

This paper examines the relationship between environmental compliance and financial performance of large US companies. The environmental performance is measured in penalties assessed for violations of environmental regulations. The financial performance is represented by the profit margins. The regression models developed in this paper suggest that the degrees of environmental compliance have a positive influence on the profit margins. Conventional economic wisdom is that regulations impose costs and restrictions and therefore put companies at a competitive disadvantage. However, this paper is consistent with the proponents of environmental regulations who argue that tough regulations force companies to be innovative and as a result make them more productive.     

Pre- and post-dam river water temperature alteration prediction using advanced machine learning models

Environmental Science and Pollution Research - Dams significantly impact river hydrology by changing the timing, size, and frequency of low and high flows, resulting in a hydrologic regime that...     

Future soil loss in highland Ethiopia under changing climate and land use

Regional Environmental Change - Donors, governments, non-government organisations and humanitarian agencies are increasingly investing in disaster risk reduction (DRR) but there is limited...