再生水灌溉对土壤团聚体中有机碳、氮和磷的形态及分布的影响

为了解再生水灌溉对砂质紫色土土壤有机碳、氮和磷的形态及其在不同粒级团聚体中分布的影响,比较了四川省彭州市灌溉年限分别为3a和8a的2个再生水灌溉区土壤中不同粒径团聚体中有机碳、氮和磷的分布及化学形态.结果表明,再生水灌溉区土壤有机碳、氮和磷主要分布在>2mm和2mm的大粒径团聚体所占比例下降,向较小粒径转化;>0.25mm团聚体中有机碳和氮含量显著上升,在所有5个粒级的团聚体中磷素含量都有显著提高.再生水灌溉还有利于紫色土重颗粒态有机碳和颗粒态氮的形成,且灌溉时间越长,效果越明显.在除<0.053mm的其它4个粒级团聚体中,再生水灌溉区土壤中交换态磷及钙结合态磷比例上升,而铁铝结合态磷比例下降.综上,再生水灌溉有效的改善了砂质紫色土土壤的有机碳库、氮库和磷库,长期灌溉可以减少人工施肥量.     

螯合树脂去除丙烯酸丁酯废水中的二价阳离子

采用氨基膦酸螯合树脂C-900去除丙烯酸丁酯废水中的二价阳离子,考察了吸附温度和废水流量对树脂动态吸附性能的影响,并用Thomas模型进行动态吸附数据的拟合分析。实验结果表明,在吸附温度为35℃、废水流量为15SV的条件下,处理后出水中3种二价阳离子总质量浓度为1.0mg/L时的穿透体积为240BV,达到穿透体积时树脂对Ca²⁺,Mg²⁺,Cu²⁺的去除率分别为100%,99.2%,99.8%。     

控轧控冷型Q550高强钢高温后的力学性能试验研究∗

通过升温、降温及冷却后的常温静力拉伸试验,对控轧控冷型(TMCP)Q550高强钢高温后的力学性能展开试验研究,得到了经历200～900℃之间9个不同的过火温度及自然冷却与浸水冷却两种冷却方式后,钢材的表观特征、应力-应变关系与基本力学性能参数,包括弹性模量、屈服强度、抗拉强度及断后伸长率。结果表明,过火温度及冷却方式对TMCP型Q550钢材弹性模量的影响较小;过火温度超过600℃时,钢材高温后的屈服强度和抗拉强度开始折减;过火温度达到700℃后,钢材的应力-应变曲线皆无屈服平台,不同冷却方式的结果开始呈现差异:随过火温度升高,自然冷却后钢材的强度减小而断后伸长率增大,浸水冷却则相反,且二者差异愈加明显。将试验结果与文献结果对比,发现当过火温度超过700℃时,TMCP型Q550高强钢高温后的力学性能与调质型(QT)Q550高强钢存在差异,在经历较高的过火温度后,TMCP钢在自然冷却下的强度折减比QT钢严重,浸水冷却下的强度增长程度低于QT钢。     

四川乡村点新粒子生成特征及其对云凝结核数浓度的贡献

为揭示成渝地区大气复合污染成因,选择乡村点资阳站的冬季,实测了颗粒物数浓度及其粒径谱分布、云凝结核(CCN),在二氧化硫、光解速率(JO1D)实测值基础上估算了新粒子生成的重要前体物气态硫酸的浓度.2012年12月5日到2013年1月5日观测期间,3~582nm颗粒物数浓度水平较高,平均值为(16072±9713)cm-3.颗粒物数谱分布呈现以积聚模态为主体的特征,占总颗粒物数浓度的46%,此比值高于我国北京、上海、广州等城市和珠江三角洲及长江三角洲的乡村点和背景点.在较高颗粒物凝结汇(CS)水平下[(4.3±3.6)×10-2s-1],甄别出7次新粒子生成(NPF)事件,占观测天数的23%.NPF事件发生时,颗粒物生成速率与增长速率分别为(5.2±1.4)cm-3s-1,(3.6±2.5)nm/h. NPF事件对CCN数浓度有明显贡献,NPF发生后CCN数浓度平均增长19%.     

Geochemistry of heavy metal-contaminated sediments from the Four River inlets of Dongting lake,China

Environmental Science and Pollution Research - The concentrations of major and trace elements in the sediments from the Four River inlets of Dongting Lake were analysed. The results show that the...     

Synthesis of efficient Y-Bi2WO6/G visible light photocatalysts with high stability for pollutant degradation

Environmental Science and Pollution Research - For effective photocatalytic pollutant degradation on bismuth tungstate (Bi2WO6), it is vital to enhance the photogenerated charge separation and the...     

Polycyclic aromatic hydrocarbon and n-alkane pollution characteristics and structural and functional perturbations to the microbial community: a case-study of historically petroleum-contaminated soil

Characterization of the typical petroleum pollutants, polycyclic aromatic hydrocarbons (PAHs) and n-alkanes, and indigenous microbial community structure and function in historically contaminated soil at petrol stations is critical. Five soil samples were collected from a petrol station in Beijing, China. The concentrations of 16 PAHs and 31 n-alkanes were measured by gas chromatography-mass spectrometry. The total concentrations of PAHs and n-alkanes ranged from 973 ± 55 to 2667 ± 183 μg/kg and 6.40 ± 0.38 to 8.65 ± 0.59 mg/kg (dry weight), respectively, which increased with depth. According to the observed molecular indices, PAHs and n-alkanes originated mostly from petroleum-related sources. The levels of ΣPAHs and the total toxic benzo[a]pyrene equivalent (ranging from 6.41 to 72.54 μg/kg) might exert adverse biological effects. Shotgun metagenomic sequencing was employed to investigate the indigenous microbial community structure and function. The results revealed that Proteobacteria and Actinobacteria were the most abundant phyla, and Nocardioides and Microbacterium were the important genera. Based on COG and KEGG annotations, the highly abundant functional classes were identified, and these functions were involved in allowing microorganisms to adapt to the pressure from contaminants. Five petroleum hydrocarbon degradation-related genes were annotated, revealing the distribution of degrading microorganisms. This work facilitates the understanding of the composition, source, and potential ecological impacts of residual PAHs and n-alkanes in historically contaminated soil.

     

Desorption of CO2, SO2, and NH3 in the vacuum evaporation of desulfurization wastewater

Environmental Science and Pollution Research - Mechanical vapor compression and multi-effect evaporation have been widely used in achieving zero discharge of desulfurization wastewater as they are...     

Combined toxic impacts of thiamethoxam and four pesticides on the rare minnow (Gobiocypris rarus)

To examine pesticide mixture toxicity to aqueous organisms, we assessed the single and combined toxicities of thiamethoxam and other four pesticides (chlorpyrifos, beta-cypermethrin, tetraconazole, and azoxystrobin) to the rare minnow (Gobiocypris rarus). Data from 96-h semi-static toxicity assays of various developmental phases (embryonic, larval, juvenile, and adult phases) showed that beta-cypermethrin, chlorpyrifos, and azoxystrobin had the highest toxicities to G. rarus, and their LC₅₀ values ranged from 0.0031 to 0.86 mg a.i. L^?1, from 0.016 to 6.38 mg a.i. L^?1, and from 0.39 to 1.08 mg a.i. L^?1, respectively. Tetraconazole displayed a comparatively high toxicity, and its LC₅₀ values ranged from 3.48 to 16.73 mg a.i. L^?1. By contrast, thiamethoxam exhibited the lowest toxic effect with LC₅₀ values ranging from 37.85 to 351.9 mg a.i. L^?1. Rare minnow larvae were more sensitive than embryos to all the pesticides tested. Our data showed that a pesticide mixture of thiamethoxam–tetraconazole elicited synergetic toxicity to G. rarus. Moreover, pesticide mixtures containing beta-cypermethrin in combination with chlorpyrifos or tetraconazole also had synergetic toxicities to fish. The majority of pesticides are presumed to have additive toxicity, while our data emphasized that the concurrent existence of some chemicals in the aqueous circumstance could cause synergetic toxic effect, leading to severe loss to the aqueous environments in comparison with their single toxicities. Thence, the synergetic impacts of chemical mixtures should be considered when assessing the ecological risk of chemicals.

     

Explanation of heavy metal pollution in coal mines of china from the perspective of coal gangue geochemical characteristics

Environmental Science and Pollution Research - In the process of coal gangue surface accumulation and underground filling disposal, the heavy metals contained in coal gangue will inevitably...