TiO2/Ti及其改性处理聚乙二醇模拟废水

采用溶胶-凝胶法制备TiO2/Ti负载体系,并以聚乙二醇2000（PEG-2000）为模拟废水对其光催化性能进行研究。实验表明,TiO2/Ti的最佳负载条件为镀膜层数8层、pH值为3、焙烧温度700℃、焙烧时间2 h,掺杂Fe3＋、Ag＋、La3＋、Pt4＋4种金属离子均可有效提高TiO2/Ti对PEG-2000模拟废水的处理效果,在Ag＋掺杂量为0.3%、焙烧温度800℃时,2.5h反应后的COD去除率达到了79.5%。XRD分析表明,金属离子的加入抑制了TiO2由锐钛矿相向金红石相转化。GC-MS分析表明,PEG-2000的光催化是大分子分解为小分子然后被矿化的过程。     

Adsorptive conversion of nitrogen dioxide from etching vent gases over activated carbon

Some metal etching operations emit limited flow rates of waste gases with reddish-brown NO₂ fume, which may cause visual and acidic-odor complaints, as well as negative health effects. In this study, tests were performed by passing caustic-treated waste gases vented from Al-etching operations through columns packed either with virgin or regenerated granular activated carbon (GAC) to test their adsorptive conversion performance of NO₂ in the gases. The gases contained 5–55 ppm NO₂ and acetic and nitric acids of below 3 ppm. Exhausted carbon was regenerated by scrubbing it with caustic solution and water, and dried for further adsorption tests. Results indicate that with an (empty bed residence time (EBRT) of 0.15 sec for the gas through the GAC-packed space, around 60% of the influent NO₂ of 54 ppm could be removed, and 47% of the removed NO₂ was converted by and desorbed from the carbon as NO. GAC used in the present study could be regenerated at least twice to restore its capacity for NO₂ adsorption. Within EBRTs of 0.076–0.18 sec, the adsorptive conversion capacity was linearly varied with EBRT. In practice, with an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design.

Implications: Some metal etching operations emit waste gases with reddish-brown (yellow when diluted) NO₂ fume which may cause visual and acidic-odor complaints, as well as negative health effects. This study provides a simple process for the adsorptive conversion of NO₂ in caustic-treated waste gases vented from metal-etching operations through a GAC column. With an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design. Saturated GAC can be regenerated at least twice by simply scrubbing it with aqueous caustic solution.     

Kinetics of hexavalent chromium reduction by iron metal

The kinetics of Cr(VI) reduction to Cr(III) by metallic iron (Fe⁰) was studied in batch reactors for a range of reactant concentrations, pH and temperatures. Nearly 86.8% removal efficiency for Cr(VI) was achieved when Fe⁰ concentration was 6 g/L (using commercial iron powder (< 200 mesh) in 120 min). The reduction of hexavalent chromium took place on the surface of the iron particles following pseudo-first order kinetics. The rate of Cr(VI) reduction increased with increasing Fe⁰ addition and temperature but inversely with initial pH. The pseudo-first-order rate coefficients (k _obs) were determined as 0.0024, 0.010, 0.0268 and 0.062 8 min^?1 when iron powder dosages were 2, 6, 10 and 14 g/L at 25°C and pH 5.5, respectively. According to the Arrehenius equation, the apparent activation energy of 26.5 kJ/mol and pre-exponential factor of 3 330 min^?1 were obtained at the temperature range of 288–308 K. Different Fe⁰ types were compared in this study. The reactivity was in the order starch-stabilized Fe⁰ nanoparticles > Fe⁰ nanoparticles > Fe⁰ powder > Fe⁰ filings. Electrochemical analysis of the reaction process showed that Cr(III) and Fe(III) hydroxides should be the dominant final products.     

聚醚砜超滤膜的研制

以聚醚砜为原料，二甲基乙酰胺为溶剂，研究了铸膜液组成和若干因素对膜性能的影响。选择适当的膜液组成和制备条件，可制得截留分子量分别为２０００，６０００，１００００的超滤膜，用该膜对α－干扰素进行分离。截留率均可达到９９％以上。     

改良型AO法组合工艺中有机物的三维荧光分析

采用三维荧光(EEM)光谱技术,对上海竹园第二污水处理厂改良型AO法组合工艺运行过程中的各种溶解性有机物(DOM)进行分析,并对比研究传统好氧活性污泥法曝气池出水和A/O脱氮工艺硝化池出水DOM的EEM光谱的迁移变化特性.结果表明,各种DOM中主要的荧光物质有类蛋白质(荧光峰A和B)及类腐殖质(荧光峰C),经改良型AO法组合工艺处理后,荧光峰的强度降低了14％～60％,同时类蛋白质和腐殖质的结构也发生了变化;腐殖酸溯源表明DOM中的腐殖酸以微生物代谢产生的带有荧光基团的腐殖酸类为主.     

锰铜铈氧化物催化剂氧化NO性能及动力学研究

实验以TiO2为载体采用浸渍法制备CuOx/TiO2、CeOx/TiO2、CuCeOx/TiO2和MnCuCeOx/TiO2催化剂,考察这些催化剂氧化NO活性,探究Cu、Ce摩尔比和添加Mn元素对CuCeOx/TiO2催化剂氧化NO活性的影响,使用扫描电镜观察催化剂表面结构.研究发现,Cu、Ce元素配合后的CuCeOx/TiO2催化剂氧化活性明显好于单独含Cu、Ce的催化剂,当Cu、Ce摩尔比为Cu:Ce=1:2时,CuCeOx/TiO2催化剂氧化活性最好,在NO浓度500×10-6,O2 10%,空速为24 000 h-1,350℃时,NO氧化度为0.62;添加Mn元素可以提高CuCeOx/TiO2催化剂低温氧化活性, 250℃时,MnCuCe/Ti-3和MnCuCe/Ti-5催化剂氧化度为0.53和0.69,300℃时,MnCuCe/Ti-3和MnCuCe/Ti-5催化剂氧化度均为0.76;此外,实验还研究了NO在MnCuCe/Ti-3催化剂上反应的动力学方程.     

Do trace metal(loid)s in road soils pose health risks to tourists? A case of a highly-visited national park in China

Nowadays, more people tend to spend their recreational time in large national parks, and trace metal(loid)s in soils have attracted long-term attention due to their possible harm to human health. To investigate the pollution levels, potential sources and health risks of trace metal(loid)s in road soils, a total of eight trace metal(loid)s (including As, Cd, Cr, Cu, Ni, Pb, Zn and Hg) from 47 soil samples along roads were studied in the Huangshan National Park in Southeast China. The results showed that the concentrations of As, Cd, Pb, Zn and Hg appeared different degrees of pollution compared with their corresponding background values. According to the pollution indices, Hg and Cd were recognized as significant pollutants presenting moderate to high ecological risk. Combining principal component analysis and positive matrix factorization model, the results showed that traffic, industrial, agricultural and natural sources were the potential origins of trace metal(loid)s in this area, with contribution rates of 39.93%, 25.92%, 10.53% and 23.62%, respectively. Non-carcinogenic risks were all negligible, while the carcinogenic risk of As was higher than the limit (1 $\times$ 10⁻⁶). Moreover, children were more susceptible to trace metal(loid)s by ingestion which appeared to be a more important exposure pathway than dermal contact and inhalation. The contribution rates of different sources to non-carcinogenic risks and carcinogenic risks were similar among children and adults, while traffic and industrial sources have a significant impact on health risks. This study will give more insights to control the environmental risks of trace metal(loid)s in national parks.     

Application of PCR and probe hybridization techniques in detection of airborne fungal spores in environmental samples

Specific PCR amplification and probe hybridization techniques were applied to examine the compositions of airborne fungi in samples from three different environments. The results from microscopic and CFU counting were compared to those of the molecular-based detections. The detection sensitivity for PCR amplifications was 9 to 73 spores and 1.3 to 19.3 CFUs per PCR reaction. The hybridization detection limit was 2 to 4 spores and 0.2 to 1.2 CFU. The hybridization method was more sensitive than PCR amplification and showed less variation among samples. Using specific PCR primers and probes we identified the presence of several fungal groups and species in the air samples. Specific detections through probe hybridization to PCR products amplified with universal or group-specific fungal primers have promising applications in the examination of air samples for environmental monitoring.     

短程硝化的实现、维持与过程控制的研究现状

短程生物脱氮技术目前倍受人们的关注,国内外学者对短程硝化提出了多种实现及维持的控制途径,但仍存在着一些问题。由于活性污泥法中DO,ORP,pH的变化规律从不同角度不同程度地反映了生物脱氮反应的进程,所以用它们作为控制参数就可以对生物脱氮反应进行过程控制。在分析中,通过对国内外短程硝化控制途径的研究现状与发展趋势的分析和总结,针对目前在实现短程硝化及维持短程硝化各种途径中存在的问题,提出了通过在线检测DO,pH,ORP来实现与维持短程硝化的新思路。     

Survey of heavy metal pollution and assessment of agricultural soil in Yangzhong district, Jiangsu Province, China

We investigated concentrations of Hg, Cd, Pb, Zn, Cu, As, Ni, and Cr in samples of soil, cereal, and vegetables from Yangzhong district, China. Compared to subsoils, the sampled topsoils are enriched in Hg, Cd, Cu, Pb, Zn, and As. High levels of Cd and Hg are observed in most agricultural soils. Concentrations of Cr and Ni show little spatial variation, and high Cu, Pb, and Zn contents correspond well to areas of urban development. High As contents are primarily recorded at the two ends of the sampled alluvion. The contents of Cd, Hg, and total organic carbon (TOC) increase gradually to maximum values in the upper parts of soil profiles, while Cr and Ni occur in low concentrations within sampled profiles. As, Pb, Cu, and Zn show patterns of slight enrichment within the surface layer. Compared to data obtained in 1990, Cd and Hg show increased concentrations in 2005; this is attributed to the long-term use of agrochemicals. Cr and Ni contents remained steady over this interval because they are derived from the weathering of parent material and subsequent pedogenesis. The measured As, Cu, Pb, and Zn contents show slight increases over time due to atmospheric deposition of material sourced from urban anthropogenic activity. Low concentrations of heavy metals are recorded in vegetables and cereals because the subalkaline environment of the soil limits their mobility. Although the heavy metal concentrations measured in this study do not pose a serious health risk, they do affect the quality of agricultural products.