Ionic liquids as lubricants or lubrication additives: An ecotoxicity and biodegradability assessment

This paper reports on the (eco)toxicity and biodegradability of ionic liquids considered for application as lubricants or lubrication additives. Ammonium- and pyrrolidinium-based cations combined with methylsulphate, methylsulphonate and/or (CF₃SO₂)₂N⁻ anions were investigated in tests to determine their aquatic toxicity using water fleas Daphnia magna, green algae Selenastrum capricornutum and marine bacteria (Vibrio fischeri). Additional test systems with an isolated enzyme (acetylcholinesterase) and isolated leukaemia cells from rats (IPC-81) were used to assess the biological activity of the ionic liquids. These compounds generally exhibit low acute toxicity and biological activity. Their biodegradability was screened according to OECD test procedures 301 B and 301 F. For choline and methoxy-choline ionic liquids ready biodegradability was observed within 5 or 10 d, respectively. Some of the compounds selected have a considerable potential to contribute to the development of more sustainable products and processes.     

Endpoint ‘floating leaves’ of <Emphasis Type="Italic">Potamogeton natans</Emphasis>: A new method to evaluate the development of macrophytes in pond mesocosms

Goal, Scope and Background One of the advantages of long-term mesocosm experiments as compared to short-term standard toxicity tests in the laboratory is the potential for detecting secondary effects due to the interaction of species and recovery with biomass of macrophytes being an important endpoint. However, generating biomass data by harvesting is often laborious, time-consuming, costly and restricted to the end of the experiment. Moreover, valuable information may get lost, in particular in single application studies, since maximal primary effects and secondary effects or recovery occur per se at different times. Potamogeton natans was used as an example in order to test whether number and area of floating leaves can be reliably measured and be used as intermediate and final endpoints in mesocosm effect studies. Methods Digital photos, which were taken of the water surface in the course of an indoor pond mesocosm study on herbicide effects, were subjected to image analysis. The results were compared to wet weight and ash-free dry weight of Potamogeton at the end of the herbicide study. Results and Discussion Both number and area of floating leaves indicated the same herbicide effects as wet weight and ash-free dry weight of Potamogeton. Error introduced by the different work steps is small and can be further minimised by a number of method improvements. Recommendations and Perspectives In indoor mesocosm studies, errors due to the perspective adjustment may be circumvented by taking the photos perpendicular to the water surface. Correction for lens aberration, identical light conditions and the use of fluorescence images are considered promising. Field applications are proposed.     

Anaerobic inhibition and biodegradation of antibiotics in ISO test schemes

Municipal sewage is the main exposure route for antibiotics that are used in human medical care. Antibiotics that adsorb to the primary sludge and/or sur-plus activated sludge will enter the anaerobic digesters of municipal sewage treatment plants. Here anaerobic biodegradation or inhibition of anaerobic bacteria resulting in a disturbance of the process might occur. ISO standards 13641 (2003) and 11734 (1999) were used for assessing the anaerobic inhibition of 16 and the anaerobic biodegradability of 9 antibiotics respectively. Digestion sludge from a municipal sewage treatment plant (1g/l d.s.) was used as inoculum in both tests. In ISO 13641 (2003) most antibiotics showed only moderate inhibition effects after a 7 day incubation period, with EC50 values between 24 mg/l and more than 1000 mg/l (equal to mg/g d.s.). In contrast, metronidazol was decisively toxic to anaerobic bacteria with an EC50 of 0.7 mg/l. In the anaerobic degradation tests according to ISO standard 11734 (1995), only benzylpenicillin showed certain ultimate biodegradation after 60 days and most antibiotics inhibited the digesting sludge in the respective parallel tested inhibition controls. Thus the inhibition of anaerobic bacteria by antibiotics observed in the degradation tests was higher than expected from the results of the inhibition tests. The possible explanations are that distinct substrates are used (yeast extract versus sodium benzoate), that the digestion sludge loses activity during the washing steps performed for the degradation tests and that the exposure time in the degradation tests was 8 times longer than in the inhibition test.     

Policy relevance of three integrated assessment tools—A comparison with specific reference to agricultural policies

The Common Agricultural Policy (CAP), a system of market support instruments, direct income transfers, and rural development measures, has been put through an ongoing reform process in recent decades. This paper introduces three policy impact assessment tools (SIAT, SEAMLESS-IF, MEA-Scope tool) and analyses how these tools have responded to a number of challenges for integrated assessment modelling as reported in the international literature. Significant progress has been made with regard to modelling linkages whereas other challenges, particularly those related to issues of scale and uncertainty management, require further efforts. It is also analysed which CAP instruments are represented and what kinds of effects can be analysed at different scales. Market instruments and direct payments are comparatively well represented, while the ability to model rural development measures is mostly beyond the scope of these tools. Because each tool has found a different solution for coping with the common challenges of integrated assessment modelling, the choice of one of the tools for a particular application depends strongly on the policy questions being asked. The SIAT provides the big picture via its ability to represent broad changes in policy instruments with EU-wide cross-sector impacts. The most comprehensive analysis of agricultural policy instruments can be obtained with SEAMLESS-IF. The MEA-Scope tool complements the other two approaches with detailed regional profiles.     

Energy budgets reveal equal benefits of varied migration strategies in northern gannets

We investigated migration and wintering of adult northern gannets (Morus bassanus) breeding in east Scotland, North Sea, by deploying geolocation loggers over three winters. The wintering ranges of these birds varied from the North Sea to the Atlantic off West Africa. Flight time was taken as a proxy for migration and foraging effort. Gannets wintering off Africa had higher total flight times during migration than birds wintering further north. Total flight times in different wintering regions were generally low. Birds off West Africa consistently spent < 25 % of daylight hours in flight, but birds further north showed more variable values that may reflect more variable weather or food availability. Winter sea surface temperatures ranged from 9 °C (North Sea) to 16 °C (West Africa). Thermostatic costs in winter as estimated by measuring thermal conductance in carcasses in still air and water were 28 % higher in North Sea than off West Africa. This effect is aggravated by higher thermostatic costs caused by stronger wind chills in the North Sea compared to the conditions off West Africa. Birds wintering close to the UK arrived at the colony on average 12 days earlier than birds wintering off West Africa. We conclude that the net cost-benefit analysis may be similar for all wintering areas investigated.     

Territorial User Rights for Fisheries as Ancillary Instruments for Marine Coastal Conservation in Chile

Territorial user rights for fisheries have been advocated as a way to achieve sustainable resource management. However, few researchers have empirically assessed their potential as ancillary marine conservation instruments by comparing them to no‐take marine protected areas. In kelp (Lessonia trabeculata) forests of central Chile, we compared species richness, density, and biomass of macroinvertebrates and reef fishes among territorial‐user‐right areas with low‐level and high‐level enforcement, no‐take marine protected areas, and open‐access areas in 42 100‐m subtidal transects. We also assessed structural complexity of the kelp forest and substratum composition. Multivariate randomized permutation tests indicated macroinvertebrate and reef fish communities associated with the different access regimes differed significantly. Substratum composition and structural complexity of kelp forest did not differ among access regimes. Univariate analyses showed species richness, biomass, and density of macroinvertebrates and reef fishes were greater in highly enforced territorial‐user‐right areas and no‐take marine protected areas than in open‐access areas. Densities of macroinvertebrates and reef fishes of economic importance were not significantly different between highly enforced territorial‐user‐right and no‐take marine protected areas. Densities of economically important macroinvertebrates in areas with low‐level enforcement were significantly lower than those in areas with high‐level enforcement and no‐take marine protected areas but were significantly higher than in areas with open access. Territorial‐user‐right areas could be important ancillary conservation instruments if they are well enforced. Derechos de Usuario Territoriales para Pesquerías como Instrumentos Accesorios para la Conservación Marina Costera en Chile     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

Trace Element Patterns and Seasonal Variability of Dust Precipitation in a Low Polluted City – The Example of Karlsruhe/Germany

Urban areas of different land uses can be distinguished by their specific patterns of atmospheric dust and trace element precipitation. Dusts emitted from industrial areas with fossil fuel processing, for instance, are enriched in V, Ni and Co. Cluster analysis groups sampling sites based on their specific element patterns. The resulting groups correspond to the surrounding land use: Urban sampling sites were identified showing similar patterns of dust and trace element precipitation as a reference site; dusts of other urban sites were influenced by diffuse pollution (caused by non-point and dispersed pollution sources), or by specific industrial emissions. Cluster analysis was also used to characterize the chemical dust composition. Three clusters of typical element associations were distinguished. These clusters represent the dust matrix, diffuse urban pollution and pollution due to fossil fuel processing. Dust precipitation and chemical dust composition show seasonal variations. Dust precipitation and concentrations of trace elements in the precipitated dust are negatively correlated during the annual courses. The highest concentrations of trace elements occur during winter, whereas the highest precipitations of dust were found during summer. This finding stresses that both, precipitation and concentration have to be addressed for the environmental assessment of urban dusts.     

The zebrafish embryo model in environmental risk assessment—applications beyond acute toxicity testing

BACKGROUND, AIM, AND SCOPE: The use of fish embryos is not regulated by current legislations on animal welfare and is therefore considered as a refinement, if not replacement of animal experiments. Fish embryos represent an attractive model for environmental risk assessment of chemicals since they offer the possibility to perform small-scale, high-throughput analyses. MAIN FEATURES: Beyond their application for determining the acute toxicity, fish embryos are also excellent models for studies aimed at the understanding of toxic mechanisms and the indication of possible adverse and long-term effects. Therefore, we have reviewed the scientific literature in order to indicate alternative applications of the fish embryo model with focus on embryos of the zebrafish. RESULTS AND DISCUSSIONS: The analysis of the mode of action is important for the risk assessment of environmental chemicals and can assist in indicating adverse and long-term effects. Toxicogenomics present a promising approach to unravel the potential mechanisms. Therefore, we present examples of the use of zebrafish embryos to study the effect of chemicals on gene and protein patterns, and the potential implications of differential expression for toxicity. The possible application of other methods, such as kinase arrays or metabolomic profiling, is also highlighted. Furthermore, we show examples of toxicokinetic studies (bioconcentration, ABC transporters) and discuss limitations that might be caused by the potential barrier function of the chorion. Finally, we demonstrate that biomarkers of endocrine disruption, immune modulation, genotoxicity or chronic toxicity could be used as indicators or predictors of sub-acute and long-term effects. CONCLUSIONS: The zebrafish embryo represents a model with an impressive range of possible applications in environmental sciences. Particularly, the adaptation of molecular, system-wide approaches from biomedical research is likely to extend its use in ecotoxicology. RECOMMENDATIONS AND PERSPECTIVES: Challenges for future research are (1) the identification of further suitable molecular markers as indicators of the mode of action, (2) the establishment of strong links between (molecular) effects in short-term assays in embryos and long-term (toxic) effects on individuals, (3) the definition of limitations of the model and (4) the development of tests that can be used for regulatory purposes.