Investigating Jacaranda mimosifolia tree as biomonitor of atmospheric trace metals

Studies on the use of tree bark as biomonitors for environmental pollutants are still very scarce. We evaluated the reliability of using Jacaranda mimosifolia, a common tree in Tshwane City of South Africa, as a suitable biomonitor of atmospheric trace metals. Bark samples were collected from ten different locations during two sampling periods. The concentrations of the metals were determined by inductively coupled plasma mass spectrometry. The concentrations of the metals were 33.2–1,795 μg/g (Pb), 21.4–210 μg/g (Cu), 68.4–490 μg/g (Zn), 30.6–2,916 μg/g (Cr), 0.12–1.34 μg/g (Cd), and 6.04–68.0 μg/g (V), respectively. The differences obtained for the results from different sites were significant (p?< 0.05). A significant difference was also observed between the two sampling periods. The trace metals concentrations suggested that automobile emissions are a major source of these metals. The study also confirms the suitability of J. mimosifolia as a biomonitor of atmospheric deposition of these metals.     

An assessment of heavy metal contamination in surface sediment using statistical analysis

The distribution and accumulation of heavy metals in the sediments, especially those nearest of wastewater discharges of south of Spain, were investigated. Sediment samples from 14 locations were collected and characterised for metal content (e.g. Ni, Cu, Zn, Cr, Pb, Mn, Cd and Hg), organic carbon, total nitrogen, total phosphorous, n-hexane-extractable material, carbonates and grain size. Concentration data were processed using correlation analysis and factor analysis. The correlation analysis of concentrations data showed important positive correlations among organic carbon, total phosphorus, Cu, Zn, Cd and Hg, otherwise weak correlations among Mn, Cr, Ni and CO₃ ^2???, indicating that these metals have complicated geochemical behaviours. The use of statistical factor analysis also confirmed these results. Sediments pollution assessment was carried out using geoaccumulation and metal pollution indexes (MPI₈). The results revealed that sediments of Cádiz bay and Sancti Petri channel were uncontaminated with the studied metals.     

Monitoring and assessing variation of sewage quality and microbial functional groups in a trunk sewer line

In this study, the variation of sewage quality was investigated and the active fraction of different microbial functional groups in biofilm was quantified in a 5.6-km trunk sewer line. The sewage quality including suspended solids, biochemical oxygen demand, total chemical oxygen demand (COD), total nitrogen, total Kjeldahl nitrogen, ammonia nitrogen, nitrite nitrogen, and nitrate nitrogen were measured and compared with the values in literatures. The results indicated that since the wastewater treatment plant was not operated at its full capacity, the concentrations of different compounds were lower compared with the values in literatures. The values of heterotrophic growth rate constant lay between 5.6 and 8.6 day^???1. Its average value was 7.7 day^???1. The values of heterotrophic lysis rate constant lay between 0.2 and 0.4 day^???1. The active heterotrophic biomass in biofilm varied from 240 to 800 mg COD m^???2 and average value was 497 mg COD m^???2. The biofilm mass varied from 880 to 1,080 mg m^???2. The percentage of heterotroph to biofilm mass fall within the range of 24.0–90.9% and average value was 52.9%. In the oxygen uptake rate batch tests, the biomass, growth rate constant, and lysis rate constant of autotroph could not be determined because the fraction of autotroph in biofilm was relatively few. It revealed that the degradation of organic matters, nitrification, and denitrification occurred in the trunk sewer line. But the results indicate that the condition seem favorable for nitrification.     

Mullet and gudgeon liver histopathology and macroinvertebrate indexes and metrics upstream and downstream from a wastewater treatment plant (Febros River—Portugal)

The increased pollution in ecosystems reinforces the importance of both chemical monitoring and biological monitoring of streams and rivers, as an effective water quality-based approach to assess aquatic ecosystem health. In this study, gudgeon (Gobio gobio) and mullet (Mugil cephalus) liver histopathology (biomarker) and some macroinvertebrate community indexes and metrics (bioindicator) were used to evaluate the effect of the wastewater treatment plant (WWTP) of Febros (Avintes) in Febros River water quality and ecosystem health. Regarding macroinvertebrate communities, the Belgian Biotic Index (BBI) and Iberian Biological Monitoring Working Party (IBMWP) indexes suggested that Febros water was slightly polluted, even though the worst situation was found downstream the WWTP discharge. Concerning community metrics, upstream percent of individuals in five numerically dominant taxa (80%) was slightly more superior than the downstream (78%). The presence of intolerant or sensible individuals, determined by percent of Ephemeroptera, Plecoptera, and Trichoptera individuals and number of Ephemeroptera, Plecoptera, and Trichoptera families metrics, was higher upstream WWTP, reflecting a better water quality. The histopathology shows the presence of hepatic lesions in gudgeon and mullet. The statistical analysis of the lesion gradation showed that only necrosis was significantly higher in gudgeon captured downstream the WWTP, while differences were not observed for mullet. The multivariate analysis of data confirmed the existence of differences in hepatic lesions between gudgeon and mullet and between sampling sites. Regarding macroinvertebrate community, this analysis showed that the organic contamination reflected by the BBI and IBMWP indexes values was a determinant factor in the spatial distribution of macroinvertebrates. This work showed that the study of different biological organization levels can be used for a better assessment of ecosystem ecological integrity and can be used as a tool to reveal anthropogenic activity effects in macroinvertebrate diversity and in fish liver pathology from Febros River.     

Risk of boron and heavy metal pollution from agro-industrial wastes applied for plant nutrition

In this study, the effects of various agro-industrial wastes were investigated when applied to soil alone or in combination with chemical fertilizers, regarding the risks of boron and heavy metal pollution of soils and plants. Nine combinations of production residues from various agro-industries, urban wastes, and mineral fertilizers were applied to potatoes in a field experiment. The content of available boron in the soil differed significantly (p < 0.05) among the applications. Generally, B values were found to be slightly higher when soapstock, prina, and blood were used alone or in combination. Although total Co, Cd, and Pb contents of soils showed no significant differences between the applications, Cr content differed significantly (p < 0.05). No pollution risk was observed in soil in respect to total Co, Cd, Pb, and Cr contents. The amount of boron and heavy metals in leaves showed no significant differences among the applications. Cobalt, Cd, and Pb in leaves were at normal levels whereas Cr was slightly above normal but well under the critical level. Boron was low in tubers and varied significantly between applications such as Co and Cd. The Co content of tubers was high, Cd and Cr contents were below average, and Pb content was between the given values. Some significant correlations were found between soil characteristics and the boron and heavy metal content of soil, leaves, and tubers.     

The relative influence of nutrients and habitat on stream metabolism in agricultural streams

Stream metabolism was measured in 33 streams across a gradient of nutrient concentrations in four agricultural areas of the USA to determine the relative influence of nutrient concentrations and habitat on primary production (GPP) and respiration (CR-24). In conjunction with the stream metabolism estimates, water quality and algal biomass samples were collected, as was an assessment of habitat in the sampling reach. When data for all study areas were combined, there were no statistically significant relations between gross primary production or community respiration and any of the independent variables. However, significant regression models were developed for three study areas for GPP (r ² = 0.79–0.91) and CR-24 (r ² = 0.76–0.77). Various forms of nutrients (total phosphorus and area-weighted total nitrogen loading) were significant for predicting GPP in two study areas, with habitat variables important in seven significant models. Important physical variables included light availability, precipitation, basin area, and in-stream habitat cover. Both benthic and seston chlorophyll were not found to be important explanatory variables in any of the models; however, benthic ash-free dry weight was important in two models for GPP.     

Serial batch leaching procedure for characterization of coal fly ash

Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.     

Use of inert C&D materials for seawall foundation: quality control measures

The technical viability of using inert construction and demolition (C&D) materials for the construction of seawall and breakwater foundations has been established by laboratory testing of the materials, numerical analysis of foundation stability, and a pilot field-scale engineering performance evaluation. However, quality control measures are still required so that only suitable materials are used for seawall and breakwater foundation construction. The development of different quality control measures for different site conditions is presented in this paper. The rationale, practicality, and implementation of these quality control measures are also discussed.     

Reusing fly ash in glass fibre reinforced cement: a new generation of high-quality GRC composites

New composite materials based on an alkali-resistant glass-fibre reinforced cement (AR-GRC) system are being developed by using fly ash (FA) produced at coal thermoelectric power plants, and fluid catalytic cracking catalyst residue (FC3R) from the petrol industry as cement replacement materials. These wastes are reactive from the pozzolanic viewpoint, and modify the nature and the microstructure of the cement matrix when a part of the Portland cement is replaced in the formulation of GRC. Several microstructural and mechanical aspects are being studied for AR-GRC systems. The behaviour of composites exposed to ageing shows that the pozzolanic activity of the ground FA added in high amounts and its mixture with the FC3R increase the flexural strength and no evidences of strength decay are observed. Additionally, the fibres due to the high alkalinity of the cementing matrix can be deteriorated. Fibres in the control (only Portland cement) and FC3R containing composites were attacked, whereas composites with FA and their mixture with FC3R show that the fibres have not been attacked, due to the pozzolanic activity of replacing materials that reduce the calcium hydroxide content in the cementing matrix.     

Management of MSW in Spain and recovery of packaging steel scrap

Packaging steel is more advantageously recovered and recycled than other packaging material due to its magnetic properties. The steel used for packaging is of high quality, and post-consumer waste therefore produces high-grade ferrous scrap. Recycling is thus an important issue for reducing raw material consumption, including iron ore, coal and energy. Household refuse management consists of collection/disposal, transport, and processing and treatment - incineration and composting being the most widely used methods in Spain. Total Spanish MSW production exceeds 21 million tons per year, of which 28.1% and 6.2% are treated in compost and incineration plants, respectively. This paper presents a comprehensive study of incineration and compost plants in Spain, including a review of the different processes and technologies employed and the characteristics and quality of the recovered ferrous scrap. Of the total amount of packaging steel scrap recovered from MSW, 38% comes from compost plants and 14% from incineration plants. Ferrous scrap from incineration plants presents a high degree of chemical alteration as a consequence of the thermal process to which the MSW is subjected, particularly the conditions in which the slag is cooled, and accordingly its quality diminishes. Fragmentation and magnetic separation processes produce an enhancement of the scrap quality. Ferrous scrap from compost plants has a high tin content, which negatively affects its recycling. Cleaning and detinning processes are required prior to recycling.