Calibration of two passive air sampler configurations for monitoring concentrations of hexabromocyclododecanes in indoor air

While polyurethane foam (PUF) disk passive air samplers are employed increasingly to monitor persistent organic pollutants in indoor air, they essentially sample only the vapour phase. As a previous investigation of the vapour : particle phase partitioning of hexabromocyclododecanes HBCDs in (outdoor) air reported them to be present largely in the particulate phase, we monitored three offices using active air samplers. In each, approximately 65% of HBCDs were present in the vapour phase, suggesting PUF disk passive samplers are suitable for monitoring HBCDs in indoor air. Concentrations in the three offices (239-359 pg Sigma HBCD m(-3)) exceed substantially those reported in outdoor air from the United States (2.1-11 pg Sigma HBCD m(-3)), but are in line with outdoor air from Stockholm. The relative abundance of the three principal diastereomers in office air was closer to that found in technical HBCD formulations (i.e. predominantly gamma-HBCD) than in most US outdoor air samples. Time integrated air concentrations of alpha-, beta-, and gamma-HBCD were obtained for an office using a low volume sampler operated over a 50 d period alongside PUF disk samplers. This calibration exercise yielded the following passive air sampling rates for both a fully- and part-sheltered PUF disk sampler design: for alpha-, beta-, and gamma-HBCD, 0.87, 0.89, and 0.91 m3 d(-1) respectively (fully-sheltered) and 1.38, 1.54, and 1.55 m3 d(-1) respectively (part-sheltered). Deployment of the part-sheltered configuration yielded concentrations approximately 35% lower than those obtained using a high volume sampler, consistent with PUF disk samplers measuring primarily the vapour phase.     

Destruction of Bacteria and Toxic Organic Chemicals by a Corona Discharge

A detailed analysis of international trends in air pollution control and waste management markets forecasts considerable growth and expansion due to increased economic activity, more stringent regulations requiring pollution control, and the increased amounts of solid waste being generated worldwide.     

Concentrations of polybrominated diphenyl ethers in blood serum from New Zealand

Polybrominated diphenyl ethers (PBDEs) were measured in samples of human blood serum taken from 23 donors in Wellington, New Zealand. Concentrations expressed as the sum of congeners 47, 99, 100, 153, 154, and 183 (SigmaPBDE) were - at an average of 7.17 ng SigmaPBDE g (lipid)(-1) - within the range reported for human tissues in Europe, but lower than in Australia and North America. The most likely source of this contamination is considered to be the release of PBDEs from imported consumer goods. The congener pattern observed is in line with that reported for human tissues outside North America, but shows a lower contribution of PBDE 47 to SigmaPBDE than observed in North Americans. No significant (p>0.1) differences between concentrations in males and females were detected, and no relationship between donor age and SigmaPBDE concentration was observed. One donor displayed concentrations that were significantly elevated (i.e. > average +2 standard deviations) above those in others in this study.     

Trends of brominated diphenyl ethers in fresh and archived Great Lakes fish (1979-2005)

While few environmental measurements of brominated diphenyl ethers (BDEs) were completed prior to the mid-1990s, analysis of appropriately archived samples might enable the determination of contaminant trends back to the introduction of these chemicals. In this paper, we first investigate the stability of BDEs in archived frozen and extracted fish samples, and then characterize trends of these chemicals in rainbow smelt (Osmerus mordax) and lake trout (Salvelinus namaycush) in each of the Great Lakes between 1979 and 2005. We focus on the four most common congeners (BDE-47, 100, 99 and 153) and use a change-point analysis to detect shifts in trends. Analyses of archived fish samples yielded precise BDE concentration measurements with only small losses (0.8% per year in frozen fish tissues, 2.2% per year in refrigerated extracts). Trends in fish from all Great Lakes showed large increases in BDE concentrations that started in the early to mid-1980s with fairly consistent doubling times (generally 2-4 years except in Lake Erie smelt where levels increased very slowly), though concentrations and trends show differences by congener, fish species and lake. The most recent data show that accumulation rates are slowing, and concentrations of penta- and hexa-congeners in trout from Lakes Ontario and Michigan and smelt from Lake Ontario started to decrease in the mid-1990s. Trends in smelt and trout are evolving somewhat differently, and trout concentrations in the five lakes are now ranked as Michigan>Superior=Ontario>Huron=Erie, and smelt concentrations as Michigan>Ontario>Huron>Superior>Erie. The analysis of properly archived samples permits the reconstruction of historical trends, congener distributions, biomagnification and other information that can aid the understanding and management of these contaminants.     

A review of studies performed to assess metal uptake by earthworms

Earthworms perform a number of essential functions in soil; the impacts of metals on earthworms are often investigated. In this review we consider the range of earthworm species, types of soil and forms of metal for which metal uptake and accumulation have been studied, the design of these experiments and the quantitative relationships that have been derived to predict earthworm metal body burden. We conclude that there is a need for more studies on earthworm species other than Eisenia fetida in order to apply the large existing database on this earthworm to other, soil dwelling species. To aid comparisons between studies agreement is needed on standard protocols that define exposure and depuration periods and the parameters, such as soil solution composition, soil chemical and physical properties to be measured. It is recommended that more field or terrestrial model ecosystem studies using real contaminated soil rather than metal-amended artificial soils are performed.     

ASSESSING GROUND WATER POLLUTION POTENTIAL FROM NITROGEN FERTILIZER USING A GEOGRAPHIC INFORMATION SYSTEM1

ABSTRACT: A geographic information system (GRASS 3.1) was used to correlate the availability of nitrogen fertilizer with the susceptibility of ground water to pollution in Texas to identify potential ground water quality problems. An agricultural pollution susceptibility map, produced by the Texas Water Commission using the DRASTIC methodology, was combined with information on cropped areas, recommended nitrogen fertilizer application rates, and aquifer outcrops. A Nitrogen Fertilizer Pollution Potential Index was generated, identifying 24 percent of Texas within the high pollution potential category An analysis of the susceptibility of major aquifer outcrops to potential pollution from nitrogen fertilizer indicated that 34 percent of the outcrop areas fall in the high pollution potential range. It is proposed that correlating the availability of a pollutant with an assessment of the susceptibility of ground water to pollution yields a more accurate screening tool for identifying potential pollution problems than considering susceptibility alone.     

Optimized acid rain abatement strategies using ecological goals

This article addresses the use of critical loads in optimized emission abatement strategies. Critical loads represent the maximum tolerable deposition possible without adverse impacts, a limit that is highly spatially variable. As deposition targets, critical loads cannot be satisfied at all receptors in Europe. Consequently, there is a need for alternative criteria that still relate to ecological indicators, yet that are feasible, consistent, and equitable. Two criteria are suggested: the relative critical load coverage and the relative deposition reduction. Deposition goals based on these criteria will guarantee that a specified fraction of ecosystems will attain target loads and thus will be protected from adverse environmental impacts. In areas that cannot achieve target loads with the best available control measures, deposition can be reduced to a specified fraction of the unabated level. Examples are presented that demonstrate their derivation and application of the two criteria. The criteria have been implemented in the European-scale Regional Acidification Information and Simulation (RAINS) model. Results obtained indicate that optimized emission strategies based on critical loads may be similar to emission strategies based on deposition reductions at certain levels of the two criteria. This suggests that it may not be necessary to utilize critical loads to formulate deposition targets. A second example shows the effect of excluding countries from European cost minimization. A country's participation can save costs with moderate deposition targets; however, significant costs can be imposed with low (stringent) deposition targets. These preliminary results have significant implications for multilateral negotiations.     

Automated Algorithms for Heuristic Base‐Flow Separation1

Abstract: The subjective nature of graphical base‐flow separation combined with the many applications of base‐flow time series derived from continuous streamflow data, motivates the development and application of automated algorithms for heuristic base‐flow separation. Base‐flow time series derived from gauged streamflow support diverse applications in engineering hydrology, catchment analysis, hydrogeologic investigations, regional low‐flow analysis, and recharge estimation. Whether based on graphical procedures for recession analysis or analytical expressions derived from fundamental equations of ground‐water flow, the variety of base‐flow separation algorithms belies the array of base‐flow definitions and interpretations that variously refer to dominant process, source, flow path, and characteristic response time. Algorithms that are invariant in their consistent – though heuristic – characterization of base‐flow response are particularly useful for interbasin comparisons of low‐flow characteristics and hydrologic regionalization. More adaptable algorithms provide application‐specific flexibility in allocating flow components like interflow to either quickflow or slowflow. Four widely used algorithms that produce consistent base‐flow time series using only gauged streamflow records are compared and contrasted with a complementary heuristic algorithm that incorporates hydrologic judgment explicitly, through manual parameterization. The utility of these inherently subjective algorithms is illustrated through a simple example of flow phase separation in a two‐component end‐member mixing model of dissolved chlorides in the Cuyahoga River.