The influence of time on lead toxicity and bioaccumulation determined by the OECD earthworm toxicity test

Internationally agreed standard protocols for assessing chemical toxicity of contaminants in soil to worms assume that the test soil does not need to equilibrate with the chemical to be tested prior to the addition of the test organisms and that the chemical will exert any toxic effect upon the test organism within 28 days. Three experiments were carried out to investigate these assumptions. The first experiment was a standard toxicity test where lead nitrate was added to a soil in solution to give a range of concentrations. The mortality of the worms and the concentration of lead in the survivors were determined. The LC50s for 14 and 28 days were 5311 and 5395 microgPb g(-1)soil respectively. The second experiment was a timed lead accumulation study with worms cultivated in soil containing either 3000 or 5000 microgPb g(-1)soil. The concentration of lead in the worms was determined at various sampling times. Uptake at both concentrations was linear with time. Worms in the 5000 microg g(-1) soil accumulated lead at a faster rate (3.16 microg Pb g(-1)tissue day(-1)) than those in the 3000 microg g(-1) soil (2.21 microg Pb g(-1)tissue day(-1)). The third experiment was a timed experiment with worms cultivated in soil containing 7000 microgPb g(-1)soil. Soil and lead nitrate solution were mixed and stored at 20 degrees C. Worms were added at various times over a 35-day period. The time to death increased from 23 h, when worms were added directly after the lead was added to the soil, to 67 h when worms were added after the soil had equilibrated with the lead for 35 days. In artificially Pb-amended soils the worms accumulate Pb over the duration of their exposure to the Pb. Thus time limited toxicity tests may be terminated before worm body load has reached a toxic level. This could result in under-estimates of the toxicity of Pb to worms. As the equilibration time of artificially amended Pb-bearing soils increases the bioavailability of Pb decreases. Thus addition of worms shortly after addition of Pb to soils may result in the over-estimate of Pb toxicity to worms. The current OECD acute worm toxicity test fails to take these two phenomena into account thereby reducing the environmental relevance of the contaminant toxicities it is used to calculate.     

Metal equilibration in laboratory-contaminated (spiked) sediments used for the development of whole-sediment toxicity tests

The equilibration and bioavailability of metals in laboratory-contaminated sediments have been investigated in order to provide better guidance on acceptable procedures for spiking sediments with metals for use in the development of whole-sediment toxicity tests. The equilibration rates of Cd, Cu, Ni and Zn spiked into three estuarine surface sediments with varying properties were investigated. Changes to sediment pH, redox potential, porewater and acid-soluble metals, acid-volatile sulfide and bacterial activity during equilibration, effects of temperature and disturbances following equilibration are reported. The addition of metals to sediments caused major decreases in pH and increases in redox potential as metals displaced iron(II) into the porewaters and added metals and iron (following oxidation) were hydrolyzed. The rates of equilibration of metals in porewaters varied considerably and were dependent on sediment and metal properties. For the oxic/sub-oxic sediments studied, metal-spikes of Cd, Cu, Ni and Zn appeared near equilibrium after 25-45, 10-15, 30-70 and 20-40 days, respectively. Acid-soluble metal concentrations decreased during the equilibration period indicating that the metals become more strongly associated with the sediments with time (less bioavailable). Bacterial activity was greatest in the sediment equilibrated at pH 7 and decreased following the addition of metals. During the equilibration period, bacterial activity increased in sediments equilibrated at pH 6, remained low in sediments at pH 8 and varied erratically in sediments at pH 7. Spiked sediments were shown to equilibrate more slowly at lower temperatures resulting in high porewater metal concentrations. Disturbances to equilibrated sediments because of sample manipulation caused significant iron(II) oxidation and losses of metals from porewaters. The importance of documenting spiking and equilibration procedures and carefully measuring and reporting sediment parameters is highlighted so that contaminant bioavailability and exposure pathways can be interpreted and organism sensitivity accurately determined. Recommendations are given for the preparation of metal-spiked sediments for toxicity testing purposes.     

Ecosystem network analysis indicators are generally robust to parameter uncertainty in a phosphorus model of Lake Sidney Lanier, USA

Understanding how data uncertainty influences ecosystem analysis is critical as we move toward ecosystem-based management. Here, we investigate how 18 Ecological Network Analysis (ENA) indicators that characterize ecosystem growth, development, and condition are affected by uncertainty in an ecosystem model of Lake Sidney Lanier (USA). We applied ENA to 122 plausible parameterizations of the ecosystem developed by Borrett and Osidele (2007, Ecological Modelling 200, 371-387), and then used the coefficient of variation (CV) to compare system indicator variability. We considered Total System Throughput (TST) as a measure of the underlying model uncertainty and tested three hypotheses. First, we hypothesized that non-ratio indicators whose calculation includes the TST would be at least as variable as TST if not more variable. Second, we postulated that indicators calculated as ratios, with TST in the numerator and denominator would tend to be less variable than TST because its influence will cancel. Last, we expected the Average Mutual Information (AMI) to be less variable than TST because it is a bounded function. Our work shows that the 18 indicators grouped into four categories. The first group has significantly larger CVs than the CV for TST. In this group, model uncertainty is amplified rendering these three indicators less useful. The second group of four indicators shows no significant difference in variability with respect to TST. Finally, there are two groups whose CV values are significantly lower than that for TST. The least variable group includes the ratio-based indicators and Average Mutual Information. Due to their low variability, we conclude that these indicators are the most robust to the parameter uncertainty and most useful for ecosystem assessment and comparative ecosystem analysis. In summary, this work suggests that we can be as certain, or more certain, in most of the selected ENA indicators as we are in the parameters of the model analyzed.     

Human dietary intake and excretion of dioxin-like compounds

Human dietary intake and excretion of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs)--collectively referred to as dioxin-like compounds (DLCs)--were investigated. Two groups of seven subjects were studied during 1999 and 2000: one aged 23.9 +/- 4.5 years, the other aged 49.4 +/- 5.2 years. For each subject, two week-long experiments were held. In one, omnivorous diets were administered, whilst in the other, a vegan diet was studied. While exposures via the omnivorous diets exceeded those via the vegan diet on a sigmaWHO-TEQ basis; for some subjects sigmaPCB exposures were comparable in both diets, implying that plant-based foods can make an appreciable contribution to exposure to sigmaPCB. For all subjects, the average dietary exposure during the omnivorous trial to PCDD/Fs and PCBs combined (expressed as WHO-TEQ) was--at 1.09 pg kg(-1) bw d(-1)--lower than recent UK "food-basket" estimates. For the same diet, the average sigmaPCB exposure for all subjects was--at 5.01 microg person(-1) d(-1)--higher than recent UK "food-basket" estimates, but consistent with recent estimates for other industrialised countries. Net absorption/excretion but not faecal excretion rates of DLCs were related to dietary intakes. Furthermore, excretion rates of the most persistent DLCs--i.e. PCB #s 138, 153, and 1,2,3,6,7,8-HxCDD--were statistically significantly greater for the older subjects. Combined, these data imply that excretion rate is dependent on body burden, and that the majority of DLCs in human faeces arise from endogenous excretion.     

Two-phase jet releases,droplet dispersion and rainout,II. Rainout experiments

This paper describes the results of the first experimental stage of Phase IV of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The objective of this stage of the JIP was to generate experimental rainout data for non-flashing water and xylene experiments. See the overview companion paper I for a wider overview of the problem, model implementation and associated model validation.A range of orifice sizes (2.5 and 5 mm) and stagnation pressures (4–16 barg) were applied. Measurements included flow rate, initial droplet size, plume concentrations/temperatures for a range of downstream locations, and distributed rainout.Instead of the Phase Doppler Anemometry method used for droplet size measurements earlier in the JIP, a photographic technique was applied in an attempt to include measurement of the larger (non-spherical) droplets. This enabled a more accurate evaluation of the initial droplet size distribution and a much clearer understanding of the droplet morphology. The results showed that the droplet behaviour in the jet is more complex than had been anticipated with the mass distribution dominated by a very small number of large non-spherical droplets. Consequently a large number of spray images were required to evaluate an accurate size distribution.Distributed rainout was measured by weighing the amount of rainout in trays positioned along the jet direction. The rainout results showed a good degree of repeatability and internal consistency. They indicated that an increasing proportion of the released material did not rainout for increasing pressure. Rainout distance also increased with increasing pressure. Evaporation of the liquid was confirmed by temperature measurements, which showed the effect of evaporative cooling.Xylene concentration measurements (up to 1%) were carried out using a direct reading photoionization detector calibrated for xylene (measuring vapour only). For a limited dataset, the accuracy of these measurements was estimated by means of comparison against an alternative more time-consuming concentration method (xylene absorption onto a charcoal filter; measuring both vapour and liquid). The concentration measurements displayed several consistent qualitative features. For example, at a given downstream distance, the peak concentration increases with increasing pressure and nozzle diameter and the vertical height at which the peak is achieved increases. The cross-stream profiles displayed a consistent tendency to increased concentration at the edge of the jet, and the reason for this has not been established.Finally recommendations are provided for potential future work.     

The Myth of Efficiency: Technology and Ethics in Industrial Food Production

In this paper, we explore how the application of technological tools has reshaped food production systems in ways that foster large-scale outbreaks of foodborne illness. Outbreaks of foodborne illness have received increasing attention in recent years, resulting in a growing awareness of the negative impacts associated with industrial food production. These trends indicate a need to examine systemic causes of outbreaks and how they are being addressed. In this paper, we analyze outbreaks linked to ground beef and salad greens. These case studies are informed by personal interviews, site visits, and an extensive review of government documents and peer-reviewed literature. To explore these cases, we draw from actor-network theory and political economy to analyze the relationships between technological tools, the design of industrial production systems, and the emergence and spread of pathogenic bacteria. We also examine if current responses to outbreaks represent reflexive change. Lastly, we use the myth of Prometheus to discuss ethical issues regarding the use of technology in food production. Our findings indicate that current tools and systems were designed with a narrow focus on economic efficiency, while overlooking relationships with pathogenic bacteria and negative social impacts. In addition, we find that current responses to outbreaks do not represent reflexive change and a continued reliance on technological fixes to systemic problems may result in greater problems in the future. We argue that much can be learned from the myth of Prometheus. In particular, justice and reverence need to play a more significant role in guiding production decisions.     

Polybrominated diphenyl ethers in domestic indoor dust from Canada, New Zealand, United Kingdom and United States

Because of the similarities in European and North American dietary exposure, it has been suggested that the order of magnitude higher body burdens in North Americans may be due to international variations in exposure via ingestion of indoor dust. Furthermore, ingestion of indoor dust has been suggested as a possible source of PBDEs in the blood serum of New Zealanders. Hence, polybrominated diphenyl ethers (PBDEs) were measured in domestic indoor dust from: Amarillo/Austin, Texas, US; Birmingham, UK; Toronto, Canada; and Wellington, New Zealand. Concentrations of BDE 209 in two UK samples were - at 520,000 and 100,000 ng g(-1) - the highest ever recorded in a domestic (or office) indoor dust sample. Median concentrations in ng g(-1) were: in Canada 620 and 560 for Sigmatri-hexa-BDEs and BDE 209 respectively; in New Zealand 96, BDE 209 not determined; in the UK 59 and 2,800; and in the US 1600 and 1300. With respect to BDE 209, concentrations were in the order: UK approximately US>Canada. For Sigmatri-hexa-BDEs, the order of concentrations was US approximately Canada>New Zealand approximately UK. Combined with principal component analysis of congener patterns, this suggests that, while North American dusts are contaminated by both Deca- and Penta-BDE commercial formulations, UK dusts are contaminated predominantly by Deca-BDE. The Octa-BDE formulation appears of minimal importance in accordance with available market demand figures. Despite the commercial formulations of PBDEs never having been manufactured in, nor imported into New Zealand, their presence in dusts from that country suggests international trade in PBDE-containing goods is an important pathway effecting their global distribution.     

Dispersal connectivity and reserve selection for marine conservation

Although larval dispersal is crucial for the persistence of most marine populations, dispersal connectivity between sites is rarely considered in designing marine protected area networks. In particular the role of structural characteristics (known as topology) for the network of larval dispersal routes in the conservation of metapopulations has not been addressed. To determine reserve site configurations that provide highest persistence values with respect to their connectivity characteristics, we model nine connectivity topological models derived from graph theory in a demographic metapopulation model. We identify reserve site configurations that provide the highest persistence values for each of the metapopulation connectivity models. Except for the minimally connected and fully connected populations, we observed two general ‘rules of thumb’ for optimising the mean life time for all topological models: firstly place the majority of reserves, so that they are neighbours of each other, on the sites where the number of connections between the populations is highest (hub), secondly when the reserves have occupied the majority of the vertices in the hub, then select another area of high connectivity and repeat. If there are no suitable hubs remaining then distribute the remaining reserves to isolated locations optimising contact with non-reserved sites.     

Penetration of polar brominated DBPs through the activated carbon columns during total organic bromine analysis

Total organic bromine (TOBr) is a collective parameter representing all the brominated organic disinfection byproducts (DBPs) in water samples. TOBr can be measured using the adsorption-pyrolysis method according to Standard Method 5320B. This method involves that brominated organic DBPs are separated from inorganic halides and concentrated from aqueous solution by adsorption onto the activated carbon (AC). Previous studies have reported that some commonly known brominated DBPs can partially penetrate through the AC during this adsorption step. In this work, the penetration of polar brominated DBPs through AC and ozone-modified AC was explored with two simulated drinking water samples and one chlorinated wastewater effluent sample. Polar brominated DBPs were selectively detected with a novel precursor ion scan method using electrospray ionization-triple quadrupole mass spectrometry. The results show that 3.4% and 10.4% of polar brominated DBPs (in terms of total ion intensity) in the chlorinated Suwannee River fulvic acid and humic acid samples, respectively, penetrated through the AC, and 19.6% of polar brominated DBPs in the chlorinated secondary wastewater effluent sample penetrated through the AC. The ozone-modification of AC minimized the penetration of polar brominated DBPs during the TOBr analysis.