Ce-Sn-W-O_x催化剂的配伍优化及脱硝影响因素

采用共混热解法制备系列Ce-Sn-W-Ox复合氧化物,用于NH3选择性催化还原NO。通过正交实验优化CeSn-W-Ox配方,采用环境扫描电镜(ESEM)、X-射线衍射仪(XRD)等表征分析催化剂的微观形貌和固相结构,确立Ce-Sn-WOx最佳配比及结构形貌。结果表明,以粒度为5~8 mm的堇青石瓷片担载分散Ce-Sn-W-Ox,进行NH3-SCR脱除NO,当Ce/Sn/W元素摩尔比为1∶0.8∶0.6时,Ce Sn0.8W0.6Ox/堇青石NH3-SCR脱除NO效果最好。当空速为7 200 h-1,催化剂在252~426℃内脱除NO效率均大于94%。重点考察了反应空速(GHSV)、水蒸气(H2O)、SO2等对Ce Sn0.8W0.6Ox/堇青石NH3-SCR脱除NO活性的影响。研究表明,空速低于10 000 h-1时,催化剂脱硝活性受空速影响小;单独通入5%H2O对催化剂脱硝活性基本没有影响;单独通入429 mg/m3SO2导致催化剂活性略有降低;同时通入429 mg/m3SO2和5%H2O,催化剂脱硝活性下降至85.33%,除去SO2和H2O后,催化剂活性又能明显回升。     

胶束强化超滤去除水中双酚A

采用截留分子量(MWCO)为5000 Dalton、1000 Dalton的聚砜超滤膜,MWCO为1 kDa的再生纤维素超滤膜;采用十二烷基苯磺酸钠(SDBS)、曲拉通100(TritonX-100)、吐温80(Tween-80)、烷基多苷(APG)为表面活性剂,用胶团强化超滤工艺去除水中双酚A。研究了不同材质和截留分子量的超滤膜、表面活性剂浓度、膜操作压力、溶液pH和溶液中电解质等因素对该工艺的影响。结果表明,SDBS对双酚A有较好的去除效果,去除率在80%以上。在H+和Na+存在的条件下,双酚A的截留率增加,透过液中SDBS浓度降低。SDBS与非离子表面活性剂的复配可以提高双酚A截留率,降低透过液中SDBS的浓度,复配效果优劣顺序为Tween-80TritonX-100APG。     

Influence of soil and hydrocarbon properties on the solvent extraction of high-concentration weathered petroleum from contaminated soils

Petroleum ether was used to extract petroleum hydrocarbons from soils collected from six oil fields with different history of exploratory and contamination. It was capable of fast removing 76–94 % of the total petroleum hydrocarbons including 25 alkanes (C₁₁–C₃₅) and 16 US EPA priority polycyclic aromatic hydrocarbons from soils at room temperature. The partial least squares analysis indicated that the solvent extraction efficiencies were positively correlated with soil organic matter, cation exchange capacity, moisture, pH, and sand content of soils, while negative effects were observed in the properties reflecting the molecular size (e.g., molecular weight and number of carbon atoms) and hydrophobicity (e.g., water solubility, octanol–water partition coefficient, soil organic carbon partition coefficient) of hydrocarbons. The high concentration of weathered crude oil at the order of 10⁵ mg kg^?1 in this study was demonstrated adverse for solvent extraction by providing an obvious nonaqueous phase liquid phase for hydrocarbon sinking and increasing the sequestration of soluble hydrocarbons in the insoluble oil fractions during weathering. A full picture of the mass distribution and transport mechanism of petroleum contaminants in soils will ultimately require a variety of studies to gain insights into the dynamic interactions between environmental indicator hydrocarbons and their host oil matrix.     

循环流化床锅炉燃煤技术热电厂生命周期评价

运用生命周期评价方法,应用Gabi5.0软件对采用循环流化床锅炉燃煤技术的热电企业进行资源耗竭和环境影响分析,计算各生产单元生命周期清单的全球变暖潜值、酸化效应潜值、富营养化潜值、非生物资源耗竭潜值、人体毒性潜值以及光化学烟雾和臭氧生成潜值等主要环境影响类型,对燃煤发电过程进行生命周期评价。结果表明,全球变暖和非生物资源耗竭为发电运行过程中主要的环境影响因素,分别占53%和15.05%;锅炉燃烧阶段的环境影响最重,占整个生命周期影响值的77.12%,并且除生物耗竭潜值外的其他5项指标均为发电运行阶段各个单元中最高。采用SNCR脱硝技术减少燃烧过程中NOx的排放量,并对该技术方案进行生命周期评价,比较方案实施前后的环境影响。     

扬州市城区地表水底泥重金属污染现状与风险评价

对扬州市城区地表水底泥进行等距离布点采样.分析cd、Cu、Pb、Zn 4种重金属的含量,并应用潜在生态危害指数法对重金属潜在生态风险进行了评价.结果表明:4种重金属的潜在生态风险由高到低的顺序为Cd>Pb>Cu>Zn,其中Cd的潜在生态风险程度已达很强;扬州市城区地表水底泥重金属潜在生态风险程度为强.各条河流底泥重金属潜在生态风险程度由强到弱顺序为古运河>二道河>宝带河>小秦淮河>新城河>水院池塘(对照);从空间上看,扬州市城区东部的地表水底泥重金属潜在生态风险程度高于西部,北部高于南部.     

数字矿山巷道三维管理的研究与设计

数字矿山是近年来的一个研究热点,而井下三维巷道的可视化是该研究领域的关键问题之一.详细阐述了如何利用C++和OpenGL技术来进行三维巷道建模与显示,并结合实例进行了分析,有效解决了井下三维巷道的设计与现实问题.     

7种农药对管氏肿腿蜂的毒性及初级风险评价

为评估农药对寄生类自然天敌昆虫的安全性,选择管氏肿腿蜂(Scleroderma guani Xiao et Wu)作为受试生物,采用管测药膜法测定了3种杀虫剂、2种除草剂、2种杀菌剂对其致死效应,并根据田间推荐剂量计算暴露量,采用风险商值HQ对杀虫剂进行风险评估。结果显示,与空白对照比较,3种杀虫剂均具明显毒性作用,其中丁硫克百威、吡虫啉和呋虫胺对管氏肿腿蜂的24 h半致死量(24 h-LR50)分别为5.11、2.92和0.06 g a.i.·ha-1,农田内风险商值分别为60.23、16.64和3 105。除草剂和杀菌剂在3倍最大田间推荐剂量作用下,24 h管氏肿腿蜂死亡率均小于50%。上述结果表明,在田间推荐用量下,3种杀虫剂对管氏肿腿蜂的初级风险评价为存在高风险,建议进一步开展高级阶段风险评估或者采取合理的风险管理措施来降低风险;除草剂和杀菌剂对管氏肿腿蜂的风险可接受。     

Identification of priority pharmaceuticals in the water environment of China

In recent years, increasing attention has been paid to the trace-level contamination of pharmaceuticals in the water environment all over the world. Considering a large number of pharmaceuticals used, it is crucial to establish a priority list of pharmaceuticals that should be monitored and/or treated first. In the present study, we developed a ranking system based on the pharmaceutical consumption, removal performance in the wastewater treatment plants (WWTPs) and potential ecological effects, and applied to the situation of China. 39 pharmaceuticals, which had available consumption data and also been reported previously in the WWTPs of China, were selected as candidate pharmaceuticals. Among them, seventeen pharmaceuticals were considered as priority pharmaceuticals, out of which, erythromycin, diclofenac acid and ibuprofen, had the high priority. Compared with other literatures, we found that some pharmaceuticals given concerns to globally should also be included in the priority list in China; while some pharmaceuticals, not mentioned in other literatures, such as cefalexin, ketoconazole, should be also given prior consideration in China. Among all the therapeutic classes, antibiotics, which were grossly abused in China, contributed the most to the priority pharmaceuticals. However, priority antibiotics accounted for only 32% of candidate antibiotics, while 71% and 100% of the candidate anti-inflammatory and antilipidemic respectively were identified as the priority pharmaceuticals, indicating that antibiotics might be overanxiously considered in the previous studies on their behaviors in the WWTPs of China.     

木屑处置漏油事故的室内模拟

用锯木屑作为吸附材料,0#柴油为吸附对象进行室内模拟实验,研究了木屑对纯油、水中浮油的吸附以及吸油后的木屑在水中的漂浮性能;并以木屑粒径、木屑投加量、振荡频率、油膜厚度为研究指标,设计了5因素4水平的正交实验,考察了各因素对0#柴油的吸附量、去除率以及木屑漂浮率的影响并对优化条件进行了讨论。结果表明,在实验研究范围内,木屑对水中柴油的吸附速度极快,1min即可达到饱和,饱和吸附量为8．08g／g;木屑在水中漂浮性能良好,静态时经72h漂浮,漂浮率维持在92％左右;振荡频率为150r／min时,72h内漂浮率维持在68％以上;最佳吸油条件组合为吸附剂粒径10～20目,振荡频率120r／min,木屑投加量0．7g,油膜厚度1．65mm。     

A bibliometric analysis of solid waste research during the period 1993–2008

This study is a bibliometric analysis of solid waste research to evaluate the current trends, using the literature in the Science Citation Index (SCI) database from 1993 to 2008. Analyzed aspects included document type, language, and publication output as well as distribution of journals, subject category, countries, institutes, title-words, author keywords, and ‘Keywords Plus’. An evaluating indicator, h-index, was applied to characterize the solid waste publications. The trend of publication outputs during 1993–2008 coincided with a power and an exponential model. Based on the exponential model during 2001–2008, the number of articles on solid waste in 2013 is predicted to be twice that in 2008. The most common subject category is environmental science and the most productive journal is Waste Management. The USA with most publications and China with the highest growth rate were compared. Finally, author keywords, words in title, and ‘Keywords Plus’ were analyzed to provide research emphasis. The results showed that mainstream research was centered on the following methods: recycling, landfilling, composting and waste-to-energy. Heavy metals, fly ash and sewage sludge were considered recent research hotspots.