乡镇工业电镀行业主要污染物排放量的估算方法

电镀分有氰电镀与无氰电镀两类。乡镇工业电镀行业的环境污染最主要是氰污染和铬污染。本文针对乡镇电镀行业的特点,调查了湖南省沅江市、四川省新都县、湖北省黄陂县、汉川县以及江苏省部分县市乡镇电镀厂,将收集资料及实际监测资料进行回归分析,得出乡镇电镀行业的污染物发生量大小与原材料的消耗有关,可以用多元回归方程估算乡镇电镀行业主要污染物发生量。这一估算方法简单易行,实用可靠,操作方便。     

Heterogeneity in fetal akinesia deformation sequence (FADS): autopsy confirmation in three 20–21-week fetuses

Fetal akinesia deformation sequence (FADS) is a rare condition characterized by intrauterine growth retardation (IUGR), congenital limb contractures, pulmonary hypoplasia, hydramnios and craniofacial abnormalities. The present report comprises an autopsy study of three fetuses to illustrate the variable clinical manifestations and neuropathological findings. Fetus 1 had arthrogryposis and no movement on fetal ultrasound examination. Aborted at 21 weeks, the fetus showed micrognathia, bilateral joint contracture with pterygia at the elbow and axilla. Growth retardation and pulmonary hypoplasia were not major features. Neuropathologic examination revealed anterior horn cell loss and lateral corticospinal tract degeneration in spinal cord, with marked muscular atrophy. Fetus 2, 20 weeks' gestation, had fetal akinesia, nuchal thickening, left pleural effusion, and Dandy-Walker malformation on ultrasound examination. Autopsy showed low-set ears, ocular hypertelorism, cleft palate, flexion contractures with pterygia over axilla, elbow and groin, pulmonary hypoplasia, Dandy-Walker malformation, unremarkable spinal cord and skeletal muscle. Fetus 3, 21 weeks' gestation, was aborted for fetal akinesia, neck and limb webbing and severe arthrogryposis. At autopsy, similar facial abnormalities, contracture and pterygia in neck and multiple major joints were found. Borderline pulmonary hypoplasia and severe lumbar scoliosis were also present. The brain, spinal cord and muscle were unremarkable. In these three fetuses, the prenatal ultrasound and autopsy findings were characteristic of FADS. Neurogenic spinal muscular atrophy was the basis of fetal akinesia in Case 1. Dandy-Walker malformation was present in Case 2, but the pathogenetic mechanism of fetal akinesia was not clear as spinal cord and muscle histology appeared normal. The etiology of akinesia was undetermined in Case 3; no extrinsic or intrinsic cause was identified. Copyright © 2002 John Wiley & Sons, Ltd.     

磷酸盐工业中的放射性污染及其防治

磷矿石中含有一定量的天然放射性物质，在工业生产中，这些物质不仅会在产品、副产品和三废中富集，还会通过生产和使用中的不同环节扩散到周围环境中，对环境造成污染。云南必须对此综合研究，制订措施，使磷化工产业开发与保护并重，可持续发展。     

长江干支流输沙量减少趋势及其影响因素浅析

通过对长江干支流各主要水文控制站的多年径流量、输沙量、含沙量、中值粒径等水沙基本特征值的统计分析，表明在过去的近50年时间内，长江干支流的年径流量中心趋势不存在具有显著统计意义的变化，而输沙量、含沙量、中值粒径值均有明显的下降态势。以水库建设和水土保持为主的人类活动是长江干支流泥沙输移量减少趋势的重要影响因素，在20世纪90年代以前长江输沙量的减少主要是水库建设的影响，之后随着“长治”工程的展开则兼具了水库建设和水土保持的影响，未来水土保持工作对长江保水减沙的长期效益将更为显著。     

耕地资源非市场价值评价方法的研究进展与述评

论文系统梳理了国内外耕地资源非市场价值评价方法的研究进展,指明了今后该领域研究的努力方向。研究结果表明:国内评价耕地资源非市场价值的方法主要是CVM,研究方法单一,缺少同时运用其他非市场价值评价方法来对CVM的研究进行比较的案例,从而无法清晰辨识CVM的缺陷,并对其加以改进;而且,CVM方法本身存在一些不足,大多数CVM的应用尚停留在实施CVM实验并报告结果的初级阶段,对CVM的有效性与可靠性方面的相关研究不够。国外非市场价值评价方法表现出两个特点:一是研究方法不断拓展,Mixed Logit逐步得到应用;二是研究方法不断深化,对CVM的研究从调研内容与结果的报告,向检验结果的有效性、可靠性方向转变,进而转向CVM的经济学理论的探讨和研究;对CVM与预期不相符合的原因进行深入研究;对问卷的设计进行深入研究;并将非市场价值评价模型和方法与空间分析相结合。在此基础上,建议将CE模型引入中国的耕地资源非市场价值评价研究;加强耕地资源非市场价值的空间分异特征与分异规律,以及耕地资源非市场价值形成的空间分异机理和动态演变规律的研究;尝试调查问卷设计中的可视化研究。     

活性污泥对四环素的吸附性能研究

通过批量平衡法研究了四环素在活性污泥上的吸附行为.结果表明,污泥混合液浓度和四环素初始浓度对吸附平衡时间、污泥吸附量和污泥吸附率均有较大影响.伪二级反应动力学模型较伪一级反应动力学模型更符合本吸附实验.在10、25℃条件下,四环素在活性污泥上的吸附行为较符合Langmuir模型,最大吸附量分别是31.14、70.95 mg.g-1;在40℃下,符合Henry模型.应用D-R模型判定吸附类型,10℃(平均吸附能为9.13 kJ.mol-1)下,化学吸附占主导;40℃(平均吸附能为7.07 kJ.mol-1)下,物理吸附占主导.温度升高,污泥对四环素的吸附能力增大.离子交换是四环素在活性污泥上吸附的一种机制.四环素的初始浓度为5、10、20 mg.L-1,钠离子浓度由0 mol.L-1增加到0.1 mol.L-1时,吸附量分别下降15.32%、15.00%、20.12%.当pH在5～10之间时,pH为6的条件下污泥对四环素的吸附量最大.     

SnAgCu焊料中Sn元素在模拟土壤溶液中的浸出行为

研究了Sn-3.5Ag-0.75Cu无铅焊料及其与Cu基板的钎焊接头在模拟土壤的NaCl,NaCl-Na2SO4和NaCl-Na2SO4-Na2CO3溶液中Sn元素的浸出行为.结果表明:焊料在NaCl-Na2SO4-Na2CO3溶液中Sn的浸出相对严重;而接头在NaCl溶液中Sn的浸出量最多.在Sn浸出量多的焊料和接头表面形成厚而疏松的腐蚀产物,XRD分析表明其产物主要由SnO,SnO2和Sn4(OH)6Cl2组成.动电位极化测试分析表明接头中Cu基板与焊料合金之间的电偶腐蚀是焊料合金与接头在同种溶液中Sn元素浸出差异的主要原因.     

Novel Co-Mg-Al-Ti-O catalyst derived from hydrotalcite-like compound for NO storage/decomposition

Catalysts of Co_1.5Mg_1.5/Al_0.9Ti_0.1O and Co_1.5Mg_1.5/AlO were successfully prepared by calcinations of corresponding hydrotalcite-like compounds at 800℃ for 4 hr. The derived oxides were of spinel phase and a small quantity of Ti substitution did not change the crystal purity. Their catalytic performance for the NO storage/decomposition was investigated. Ti incorporation enhanced the NO decomposition activity while has an opposite effect on the storage capacity of catalyst. In situ FT-IR spectra of the catalysts showed that the final adsorption species on the catalysts was coordinated nitrates/nitrites. In addition, NO storage/decomposition mechanism has been discussed on the basis of these observations.     

Ammonia volatilization and availability of Cu, Zn induced by applications of urea with and without coating in soils

Ammonia volatilization and the distribution of Cu and Zn were investigated in two types of soil treated with coated and uncoated urea. The rate of ammonia volatilization in two weeks after fertilizing with coated urea was 8% in soil 1 (soil derived from river alluvial deposits in Dongting Lake Plain) and 5.15% in soil 2 (red soil derived from quaternary red clay), about half the rates observed when fertilizing with common urea, implying that the hydrolysis speed of the coated urea was lower than for common urea, and that the coated urea can increase nitrogen use efficacy. As for the availability of Cu and Zn, their concentrations decreased in the first week after fertilization, and then increased, which was contrary to the effect of treatment on soil pH. For example, when the pH was 7.99, there was 0.79 mg/kg exchangeable Cu and 0.85 mg/kg exchangeable Zn in the soil derived from river alluvial deposits in Dongting Lake Plain. However, the concentrations of exchangeable Cu and Zn were generally lower for the common urea treatments than those with the coated urea because the peak pH for the common urea treatment was greater. The concentrations of these elements correlated well with pH in the range 4-8 in second order polynomial fits.     

Aerosol structure and vertical distribution in a multi-source dust region

The vertical distribution of aerosols was directly observed under various atmospheric conditions in the free troposphere using surface micro-pulse lidar (MPL4) at the Zhangye Station (39.08°N, 100.27°E) in western China in the spring of 2008. The study shows that the aerosol distribution over Zhangye can be vertically classified into upper, middle and lower layers with altitudes of 4.5 to 9 km, 2.5 to 4.5 km, and less than 2.5 km, respectively. The aerosol in the upper layer originated from the external sources at higher altitude regions, from far desert regions upwind of Zhangye or transported from higher atmospheric layers by free convection, and the altitude of this aerosol layer decreased with time; the aerosols in the middle and lower layers originated from both external and local sources. The aerosol extinction coefficients in the upper and lower layers decreased with altitude, whereas the coefficient in the middle layer changed only slightly, which suggests that aerosol mixing occurs in the middle layer. The distribution of aerosols with altitude has three features: a single peak that forms under stable atmospheric conditions, an exponential decrease with altitude that occurs under unstable atmospheric conditions, and slight change in the mixed layer. Due to the impact of the top of the atmospheric boundary layer, the diurnal variation in the aerosol extinction coefficient has a single peak, which is higher in the afternoon and lower in the morning.