粉末活性炭对膜过滤性能的影响

向一体式膜生物反应器中投加粉末活性炭(PAC),可以显著提高膜的过滤性能,有效缓解膜的污染.研究结果表明:投加PAC的吸附作用减少了由于胞外聚合物(EPS)而引起的膜污染;膜表面PAC颗粒的存在减小了浓差极化层的厚度和水力边界层的厚度,提高了过滤物质的传递速率;膜表面形成的PAC层还可过滤微生物和胶体颗粒,减少了它们到达膜表面的数量.     

遵义市PM2.5中水溶性离子的污染特征及来源解析

为探究遵义市PM_2.5中水溶性离子的污染特征及来源,于2018年6月~2019年5月采集了遵义市两个采样点共120个PM_2.5样品,并利用离子色谱法对样品中8种水溶性离子进行了分析。结果表明：采样期间,遵义市PM_2.5平均值为47.6±19.3 μg/m³,呈现冬春高、夏秋低的季节变化特征;8种水溶性离子平均质量浓度顺序为SO₄^2- > NO₃^- > NH₄⁺ > Ca²⁺ > K⁺ > Cl^- > Na⁺ > Mg²⁺,平均值为13.74 μg/m³,水溶性离子质量浓度的季节变化与PM_2.5变化趋势相似;SO₄^2-、NO₃^-、NH₄⁺（SNA）是PM_2.5中主要水溶性离子,占比为83.8%,说明遵义市大气PM_2.5二次污染较严重;相关性分析表明,PM_2.5中NH₄⁺主要以（NH₄）₂SO₄、NH₄HSO₄的形式存在,部分以NH₄NO₃的形式存在;[NO₃^-]/[SO₄^2-]小于1,表明固定源为主要污染源;主成分分析结果表明,PM_2.5中水溶性离子主要来源于燃煤、交通混合源、土壤、建筑扬尘及农业源。     

黄河干流宁蒙段溶解性有机物组分特征及其与金属离子的相关性

溶解性有机物(dissolved organic matter,DOM)是天然水体的重要组成部分,由于化学极性及所含的官能团不同,其在水体中的化学行为也不同.本研究以黄河干流宁蒙段为研究对象,于2015年4月采集了下河沿至头道拐沿程7个断面的水样,采用XAD系列树脂将DOM分为疏水性酸(hydrophobic acid,HOA)、疏水性碱(hydrophobic base,HOB)、弱疏水性酸(weak hydrophobic acid,WHOA)和亲水性物质(hydrophilic matter,HYI)这4个组分,探讨了DOM组分含量、荧光峰值及其与Pb、Zn、Cu、Cr、As这5种金属离子之间的相关性.结果表明,黄河宁蒙段DOM总量由下河沿至头道拐沿程逐渐增加.各断面DOM腐殖化程度较低,以亲水性的蛋白质类小分子物质(HYI)为主,疏水性酸(HOA)次之,这与黄河沿岸排污导致内源作用增强有关.三维荧光光谱中类腐殖质和类蛋白质荧光峰型显著,且类腐殖质峰沿程逐渐增强,进一步证实了内源污水输入的影响.SPSS相关性分析结果表明,DOM与5种金属离子呈现出不同程度的相关性,其中与Cu离子显著相关;4种组分中HYI与Cu离子的相关性最强,说明二者在迁移转化过程中存在显著相互作用.进一步研究发现,芳香蛋白类物质荧光峰强度随Cu离子浓度的升高而降低,这可能是Cu与亲水性组分中的芳香类蛋白质发生络合产生荧光淬灭效应,从而导致荧光强度降低.     

Performance and mechanism of Cr(VI) removal by zero-valent iron loaded onto expanded graphite

Zero-valent iron (ZVI) was loaded on expanded graphite (EG) to produce a composite material (EG-ZVI) for efficient removal of hexavalent chromium (Cr(VI)). EG and EG-ZVI were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and Brunauer–Emmett–Teller (BET) analysis. EG-ZVI had a high specific surface area and contained sub-micron sized particles of zero-valent iron. Batch experiments were employed to evaluate the Cr(VI) removal performance. The results showed that the Cr(VI) removal rate was 98.80% for EG-ZVI, which was higher than that for both EG (10.00%) and ZVI (29.80%). Furthermore, the removal rate of Cr(VI) by EG-ZVI showed little dependence on solution pH within a pH range of 1–9. Even at pH 11, a Cr(VI) removal rate of 62.44% was obtained after reaction for 1 hr. EG-ZVI could enhance the removal of Cr(VI) via chemical reduction and physical adsorption, respectively. X-ray photoelectron spectroscopy (XPS) was used to analyze the mechanisms of Cr(VI) removal, which indicated that the ZVI loaded on the surface was oxidized, and the removed Cr(VI) was immobilized via the formation of Cr(III) hydroxide and Cr(III)–Fe(III) hydroxide/oxyhydroxide on the surface of EG-ZVI.     

Aluminum formate (AF): Synthesis, characterization and application in dye wastewater treatment

Aluminum formate (AF), a degradable and non-corrosive coagulant, was synthesized from aluminum hydroxide and formic acid. Polyamidine (PA), as a coagulation aid, was combined with AF for dye wastewater treatment. AF was characterized by XPS, FT-IR, viscosity, zeta potential, mass spectrum and XRD, and the flocculation properties of the dual-coagulation system were characterized by FT-IR and SEM. The results showed that COOH, Al₂O₃-Al and O₂-Al bonds were formed in the AF synthesis process, and AF had a higher molecular weight and higher charge neutralization ability than PAC. The hydrolysates of AF were determined to contain Al₁₃ Al₁₁ and Al₂, and the components of AF were confirmed to comprise a mixture including aluminum formate (C₃H₃AlO₆) and its hydrate. When the color removal efficiency reached 100% in jar tests, the optimized dosage of AF/PA was 18.91/0.71 mg/L, while the optimized dosage of PAC/PA was 21.19/0.91 mg/L. According to the variance analysis, the interaction between AF/PA and PAC/PA were insignificant in macroscopic view. FT-IR spectrum indicated AF captured pollutant by means of CCO bond, PAC captured pollutant by δ CH, CC and δ CH. Overall, although the coagulation mechanism of AF was different from that of PAC, AF/PA showed better coagulation efficiency than PAC/PA in dye wastewater treatment.     

施用生物炭对土壤Cd形态转化及烤烟吸收Cd的影响

采用盆栽试验模拟Cd污染土壤,研究施用烟秆炭(0、10、20 g·kg~(-1))对土壤pH、有机质含量、土壤Cd形态分布及烤烟Cd含量和Cd累积量的影响.结果表明:随着生育期的延长,土壤pH和有机质含量均呈现升高的趋势.在同一Cd污染水平下,土壤pH和有机质含量均随生物炭施用量的增加而升高.随生物炭施用量的增加,土壤有效态Cd和可交换态Cd含量显著降低,土壤碳酸盐结合态Cd、铁锰氧化物结合态Cd、有机结合态Cd和残渣态Cd含量升高.移栽后30 d,处理G2T2和G2T1的土壤有效态Cd含量的降幅分别达到45.59%和24.56%.外源添加Cd的土壤中,土壤pH和有机质含量均与土壤有效态Cd和可交换态Cd含量呈显著负相关关系(p0.01),与土壤碳酸盐结合态Cd、铁锰氧化物结合态Cd和有机结合态Cd含量呈显著正相关关系(p0.01).在Cd污染土壤上,施用生物炭能明显降低烟株各部位Cd含量,烟株各部位干物质积累量随生物炭施用量的增加显著升高,烟株各部位Cd累积量和总Cd累积量随生物炭施用量的增加呈降低的趋势.由此说明,在Cd污染的土壤上施用生物炭能够使土壤中可被植物吸收利用的有效态Cd转化为潜在的无效态Cd,从而达到修复土壤并减轻作物受Cd毒害的目的.     

典型可溶有机质与磺胺二甲嘧啶的络合作用研究

以藻源有机质(AOM)和腐殖酸(HA)作为典型生物大分子可溶有机质(DOM)和腐殖化DOM,采用荧光猝灭滴定和光谱分析考察磺胺二甲嘧啶(SMZ)与DOM的络合作用.三维荧光光谱结合平行因子分析显示AOM荧光组分主要由类酪氨酸和类色氨酸物质组成,而类富里酸和类腐殖酸物质是HA荧光组分的主要构成.4种荧光组分可与SMZ发生不同程度的静态猝灭,且猝灭过程中DOM分子构象改变.同步荧光光谱结合二维相关图谱进一步发现类酪氨酸优先于类色氨酸组分与SMZ发生络合作用.Ryan-Weber非线性模拟拟合表明AOM中各荧光组分与SMZ的络合稳定常数(logK)大小为:类富里酸(3.33)类酪氨酸(3.12)类色氨酸(2.15)类腐殖酸(1.57);而HA中大小为:类富里酸(3.06)类腐殖酸(2.02).总体上生物大分子DOM对SMZ的亲和力高于腐殖化DOM.DOM与SMZ的相互作用可改变水环境中抗生素的形态和归趋,影响其生物有效性和生态毒性.     

基于时空指示克里格的PM2.5不确定性分布

以山东省2014年PM_2.5浓度监测数据为对象,利用时空指示克里格理论和方法,实现对PM_2.5时空分布的不确定性分析.结果表明,山东省境内PM_2.5的空间自相关范围大于100km,时间自相关范围为3d左右.此外,山东省境内各空间位置全年空气质量以大于0.8的概率达到空气质量"优"级别的时空占比为7%,以大于0.8的概率达到轻度污染级别的时空占比为34%,以大于0.8的概率超过严重污染级别的时空占比为1%;东部沿海地域空气质量达到轻度污染的概率明显高于中西部,夏季空气质量也明显优于其它季节.     

全球增温1.5℃和2.0℃对淮河中上游径流影响预估

论文应用第5次耦合模式比较计划(Coupled Model Intercomparison Project Phase 5,CMIP5)中5个全球气候模式(Global Climate Models,GCMs)和3种典型浓度路径(Representative Concentration Pathways,RCPs)在全球增温1.5℃和2.0℃下的预估结果,分析了淮河中上游地区未来的气候变化特征。进一步基于SWAT(Soil and Water Assessment Tool)水文模型定量预估了气候变化对该区域径流量的影响,并量化了预估结果的不确定性。结果表明:SWAT模型在淮河中上游对月径流量具有较好的模拟能力。在全球增温1.5℃和2.0℃下,淮河中上游年平均气温分别较基准期(1986—2005年)增加1.1℃和1.7℃;年降水量较基准期分别相应增加4%和7%;基于SWAT模型预估的年径流量较基准期分别增加5%和8%。未来气候变化不会改变月径流分布特征,年内径流仍集中在盛夏和初秋(6—9月)。预估的月丰水流量明显增加,尤其当全球增温达到2.0℃后,出现洪涝的风险明显增大。未来降水量和径流量预估都存在较大的不确定性,不确定性主要来源于GCMs,在全球增温2.0℃下预估的不确定性更大。     

Ag/Cu3(BTC)2复合催化剂的制备及其NH3-SCR催化性能

采用紫外还原的方法成功制备出Cu₃（BTC）₂（均苯三甲酸合铜）负载贵金属Ag纳米颗粒的Ag/Cu₃（BTC）₂复合催化剂,并用于氨法脱硝反应.应用X射线衍射（XRD）、透射电子显微镜（TEM）、BET测试等手段对催化剂的物理化学性能进行了表征.结果发现Ag纳米颗粒以球状结构高度均匀分散在Cu₃（BTC）₂骨架结构的表面.负载Ag纳米颗粒和Cu-MOF的协同作用,提高了Ag/Cu₃（BTC）₂催化剂的脱硝效率,负载量为15wt%的催化剂表现出最优脱硝效率,在220～260℃达到100%的NO转化率.同时,利用in-situ FTIR技术对NH₃-SCR的反应机理进行了探究.