印刷线路板废弃物的热解与动力学实验研究

分别应用管式炉反应器和热重分析手段对印刷线路板废弃物的热解行为和热解动力学进行了实验研究。在管式炉中，研究不同的热解温度：700～950℃，对产物分布和气体成分分布的影响。实验结果表明：PCB热解气体的主要成分是H2和CO2，气体的热值较低，仅为2．09～5．41MJ/m^3，PCB不适合以气体产物为目标的能源利用方式。应用Friedman方法对PCB的热解动力学进行了研究，求得PCB的热解动力学参数分别是：表观活化能190．92kJ/mol，反应级数5．97，指前因子lnA47．14min^-1。     

Effect of formaldehyde on biofilm activity and morphology in an ultracompact biofilm reactor for carbonaceous wastewater treatment.

The effects of formaldehyde on biofilm morphology and biomass activity were investigated in an ultracompact biofilm reactor (UCBR) for carbonaceous wastewater treatment. The wastewater contained a fixed amount of glucose (with a chemical oxygen demand concentration of 600 mg/L) and an increasing concentration of formaldehyde (ranging from 21.4 to 271.1 mg/L). An influent formaldehyde concentration higher than 75 mg/L could facilitate filamentous growth (on biofilm) control and lead to a higher biofilm density, which is desirable as it enhanced the UCBR performance stability. However, at an influent formaldehyde concentration higher than 214.4 mg/L, biomass production was inhibited and deteriorations of biofilm morphology and biomass activity were observed. This study showed that it was desirable to maintain an influent formaldehyde concentration lower than 202.2 mg/L, as this concentration could achieve a good biofilm morphology while not inhibiting its microbial activity.     

锶—89在珍珠岩中吸附的研究

研究了不同粒径的珍珠岩对＾８９Ｓｒ的吸附。结果表明，珍珠岩对＾８９Ｓｒ具有较强的吸附能力，饱和吸附率大于９５％；通过振荡能加速珍珠岩对＾８９Ｓｒ的吸附；珍珠岩对＾８９Ｓｒ的吸附率与时间关系由多项指数描述；不同粒径的珍珠岩对＾８９Ｓｒ的吸附率没有明显差异。     

Sorption of arsenate and arsenite anions by iron(III)-poly(hydroxamic acid) complex

Iron(III)-poly(hydroxamic acid) resin complex has been studied for its sorption abilities with respect to arsenate and arsenite anions from an aqueous solution. The complex was found effective in removing the arsenate anion in the pH range of 2.0 to 5.5. The maximum sorption capacity was found to be 1.15 mmol/g. The sorption selectivity showed that arsenate sorption was not affected by chloride, nitrate and sulphate. The resin was tested and found effective for removal of arsenic ions from industrial wastewater samples.     

Levels of PCDDs and PCDFs in Korean river sediments and their detection by biomarkers

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are a group of toxic halogenated aryl hydrocarbons inducing various physiological disorders against biological organisms. Here, we investigated their levels in sediment samples taken from 12 different rivers in Korea. The levels of PCDD/PCDFs in sediment samples were expressed as concentrations and international TEQ values. Among 17 PCDD/PCDFs selected as target compounds in this study, the 1,2,3,4,7,8-HxCDD and OCDD were found in all river sediments with significant variation in various congener profiles of PCDD/PCDFs in sediments. PCDD/PCDFs could be monitored by sensitive biomarkers using insect immune system. Out of 12 river sediment samples, the biomarkers reported four spots (up, middle, and down Singil sites and Ansan) as putative contamination areas. When comparing both chemical and biological monitoring results, two methods agreed three spots of Singil as contamination areas (above 10ppt levels) as well as six river sediment samples as relatively less-contaminated areas, but differed in the results in Ansan and Miho, probably due to relative non-specificity of biomarkers. Despite some disparity between bio- and chemical monitoring results, the biomarkers can be recommended as a device warning the contamination of dioxins in the environment because of a fast and inexpensive detection method.     

粉末活性炭对膜过滤性能的影响

向一体式膜生物反应器中投加粉末活性炭(PAC),可以显著提高膜的过滤性能,有效缓解膜的污染.研究结果表明:投加PAC的吸附作用减少了由于胞外聚合物(EPS)而引起的膜污染;膜表面PAC颗粒的存在减小了浓差极化层的厚度和水力边界层的厚度,提高了过滤物质的传递速率;膜表面形成的PAC层还可过滤微生物和胶体颗粒,减少了它们到达膜表面的数量.     

遵义市PM2.5中水溶性离子的污染特征及来源解析

为探究遵义市PM_2.5中水溶性离子的污染特征及来源,于2018年6月~2019年5月采集了遵义市两个采样点共120个PM_2.5样品,并利用离子色谱法对样品中8种水溶性离子进行了分析。结果表明：采样期间,遵义市PM_2.5平均值为47.6±19.3 μg/m³,呈现冬春高、夏秋低的季节变化特征;8种水溶性离子平均质量浓度顺序为SO₄^2- > NO₃^- > NH₄⁺ > Ca²⁺ > K⁺ > Cl^- > Na⁺ > Mg²⁺,平均值为13.74 μg/m³,水溶性离子质量浓度的季节变化与PM_2.5变化趋势相似;SO₄^2-、NO₃^-、NH₄⁺（SNA）是PM_2.5中主要水溶性离子,占比为83.8%,说明遵义市大气PM_2.5二次污染较严重;相关性分析表明,PM_2.5中NH₄⁺主要以（NH₄）₂SO₄、NH₄HSO₄的形式存在,部分以NH₄NO₃的形式存在;[NO₃^-]/[SO₄^2-]小于1,表明固定源为主要污染源;主成分分析结果表明,PM_2.5中水溶性离子主要来源于燃煤、交通混合源、土壤、建筑扬尘及农业源。     

黄河干流宁蒙段溶解性有机物组分特征及其与金属离子的相关性

溶解性有机物(dissolved organic matter,DOM)是天然水体的重要组成部分,由于化学极性及所含的官能团不同,其在水体中的化学行为也不同.本研究以黄河干流宁蒙段为研究对象,于2015年4月采集了下河沿至头道拐沿程7个断面的水样,采用XAD系列树脂将DOM分为疏水性酸(hydrophobic acid,HOA)、疏水性碱(hydrophobic base,HOB)、弱疏水性酸(weak hydrophobic acid,WHOA)和亲水性物质(hydrophilic matter,HYI)这4个组分,探讨了DOM组分含量、荧光峰值及其与Pb、Zn、Cu、Cr、As这5种金属离子之间的相关性.结果表明,黄河宁蒙段DOM总量由下河沿至头道拐沿程逐渐增加.各断面DOM腐殖化程度较低,以亲水性的蛋白质类小分子物质(HYI)为主,疏水性酸(HOA)次之,这与黄河沿岸排污导致内源作用增强有关.三维荧光光谱中类腐殖质和类蛋白质荧光峰型显著,且类腐殖质峰沿程逐渐增强,进一步证实了内源污水输入的影响.SPSS相关性分析结果表明,DOM与5种金属离子呈现出不同程度的相关性,其中与Cu离子显著相关;4种组分中HYI与Cu离子的相关性最强,说明二者在迁移转化过程中存在显著相互作用.进一步研究发现,芳香蛋白类物质荧光峰强度随Cu离子浓度的升高而降低,这可能是Cu与亲水性组分中的芳香类蛋白质发生络合产生荧光淬灭效应,从而导致荧光强度降低.     

Performance and mechanism of Cr(VI) removal by zero-valent iron loaded onto expanded graphite

Zero-valent iron (ZVI) was loaded on expanded graphite (EG) to produce a composite material (EG-ZVI) for efficient removal of hexavalent chromium (Cr(VI)). EG and EG-ZVI were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and Brunauer–Emmett–Teller (BET) analysis. EG-ZVI had a high specific surface area and contained sub-micron sized particles of zero-valent iron. Batch experiments were employed to evaluate the Cr(VI) removal performance. The results showed that the Cr(VI) removal rate was 98.80% for EG-ZVI, which was higher than that for both EG (10.00%) and ZVI (29.80%). Furthermore, the removal rate of Cr(VI) by EG-ZVI showed little dependence on solution pH within a pH range of 1–9. Even at pH 11, a Cr(VI) removal rate of 62.44% was obtained after reaction for 1 hr. EG-ZVI could enhance the removal of Cr(VI) via chemical reduction and physical adsorption, respectively. X-ray photoelectron spectroscopy (XPS) was used to analyze the mechanisms of Cr(VI) removal, which indicated that the ZVI loaded on the surface was oxidized, and the removed Cr(VI) was immobilized via the formation of Cr(III) hydroxide and Cr(III)–Fe(III) hydroxide/oxyhydroxide on the surface of EG-ZVI.     

Aluminum formate (AF): Synthesis, characterization and application in dye wastewater treatment

Aluminum formate (AF), a degradable and non-corrosive coagulant, was synthesized from aluminum hydroxide and formic acid. Polyamidine (PA), as a coagulation aid, was combined with AF for dye wastewater treatment. AF was characterized by XPS, FT-IR, viscosity, zeta potential, mass spectrum and XRD, and the flocculation properties of the dual-coagulation system were characterized by FT-IR and SEM. The results showed that COOH, Al₂O₃-Al and O₂-Al bonds were formed in the AF synthesis process, and AF had a higher molecular weight and higher charge neutralization ability than PAC. The hydrolysates of AF were determined to contain Al₁₃ Al₁₁ and Al₂, and the components of AF were confirmed to comprise a mixture including aluminum formate (C₃H₃AlO₆) and its hydrate. When the color removal efficiency reached 100% in jar tests, the optimized dosage of AF/PA was 18.91/0.71 mg/L, while the optimized dosage of PAC/PA was 21.19/0.91 mg/L. According to the variance analysis, the interaction between AF/PA and PAC/PA were insignificant in macroscopic view. FT-IR spectrum indicated AF captured pollutant by means of CCO bond, PAC captured pollutant by δ CH, CC and δ CH. Overall, although the coagulation mechanism of AF was different from that of PAC, AF/PA showed better coagulation efficiency than PAC/PA in dye wastewater treatment.