铅锌尾矿废弃地的化学性质研究

凡口铅锌尾矿废弃地的不同区位及不同深度的尾矿中铅锌含量存在着较大的差异 ,总锌为 70 3～ 19657mg/ kg、总铅 10 4 13～ 94 988mg/ kg。正常尾矿中 ,有效态锌含量达到 151.6～ 84 1.7mg/ kg,有效态铅含量很低 ( 0 .75～ 2 .50 mg/ kg) ,有机质、总氮、有效磷及速效钾等营养物质缺乏。当尾矿酸化后 ,p H降低 ,有效态 Pb、Zn含量升高 ,有效锌达到 175.8～ 2 82 8.0 mg/ kg,有效铅含量最高为 10 0 .0 mg/kg,而有机质、总氮和有效磷为零 ,使尾矿更加贫瘠。在尾矿库的边缘区位和尾矿表面的覆盖土壤区位 ,基质中营养物质含量增加 ,但是营养状况的改善又引起了有效态的 Pb、Zn含量升高。     

基于MODIS数据的安徽省植被水分利用效率时空变化及影响因素

水分利用效率是衡量生态系统碳水循环耦合程度的重要指标。基于MODIS数据、土地覆盖类型数据和气象数据,估算安徽省植被水分利用效率(WUE）,采用趋势分析法和相关分析法对安徽省2000~2014年植被WUE的时空格局、变化趋势及影响因素进行研究。研究表明:（1）不同植被类型的WUE年均值差异明显,常绿阔叶林和常绿针叶林的WUE均值较高,分别达到1.66和1.69 gC?mm-1?m-2,而耕地的年均WUE最低,各植被类型的年均WUE按照“常绿针叶林>常绿阔叶林>灌木>草地>落叶阔叶林>针阔混交林>耕地”的顺序递减。植被年均WUE具有较强的空间分异性规律,整体上呈现南北高中间低的趋势,植被WUE的高值区主要分布在大别山区和皖南山区,分布范围与常绿针叶林、常绿阔叶林的分布范围基本一致。（2）安徽省2000~2014年植被WUE年内变化呈现出“增加-减小-增加-减小”的M状“双峰型”趋势,具有明显的季节差异,呈现出春季＞秋季＞夏季＞冬季的特征,各季节植被WUE的均值分别占植被WUE的32.58%、24.91%、29.27%、13.24%。（3）安徽省植被WUE动态变化受到降水影响显著的区域占比3.88%;气温显著影响的区域占比2.19%;降水显著影响的地区主要分布在林地范围内,温度显著影响的地区则位于耕地范围内,降水和气温综合显著影响所占面积最小,为0.11%;而植被WUE受气温和降水影响均不显著占比为93.82%;整体上,安徽省大部分地区的植被WUE变化主要受非气候因素影响。     

基于尾涡强度的无人机与民机纵向安全间隔评估研究

为了解决无人机频频入侵机场净空,与民航客机发生危险接近的问题,以碰撞风险为量化指标,对无人机与民机需要保持的纵向安全间隔进行评估研究。分析民机尾涡流场对无人机运行的影响,利用Crow近场涡强度消散理论,得到实际尾迹影响区改进Reich碰撞模板,据此建立CNS/GPS性能环境下的纵向间隔评估模型,通过Matlab进行间隔值求解。研究结果表明:模型可以较为准确地反映民机起飞初始爬升阶段无人机尾随运行时导航性能和尾涡迹对所需最小间隔值的影响,并得到给定安全目标水平的计算结果。     

聚苯乙烯/CdS/TiO_2双壳层核壳纳米颗粒可见光催化降解甲基橙

采用溶胶-凝胶法,在聚苯乙烯(PS)/CdS核壳纳米颗粒表面包覆致密TiO_2层,制备出具有双壳层结构的PS/CdS/TiO_2纳米复合颗粒,考察了制备条件对材料结构的影响,并利用甲基橙溶液对其光催化性能进行了评价。SEM、TEM、XRD和FTIR分析结果表明,制得的微球单分散性良好,壳层包覆完整,厚度均匀。PS/CdS/TiO_2制备的适宜反应时间为12~18 h,适宜反应pH为7~9。PS/CdS/TiO_2较PS/CdS具有更为优异的可见光催化性能。     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

Stable isotope on the evaluation of water quality in the presence of WWTPs in rivers

Environmental Science and Pollution Research - We investigated the distribution of nitrogen compounds in Han River as well as two tributaries of Tancheon and Jungrangcheon. Particularly, we...     

Simultaneous determination of estrogenic odorant alkylphenols,chlorophenols, and their derivatives in water using online headspace solid phase microextraction coupled with gas chromatography-mass spectrometry

A simple online headspace solid-phase microextraction (HS-SPME) coupled with the gas chromatography-mass spectrometry (GC-MS) method was developed for simultaneous determination of trace amounts of nine estrogenic odorant alkylphenols and chlorophenols and their derivatives in water samples. The extraction conditions of HS-SPME were optimized including fiber selection, extraction temperature, extraction time, and salt concentration. Results showed that divinylbenzene/Carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber was the most appropriate one among the three selected commercial fibers, and the optimal extraction temperature, time, and salt concentration were 70 °C, 30 min, and 0.25 g/mL, respectively. The developed method was validated and showed good linearity (R ²?>?0.989), low limit of detection (LOD, 0.002–0.5 μg/L), and excellent recoveries (76–126 %) with low relative standard deviation (RSD, 0.7–12.9 %). The developed method was finally applied to two surface water samples and some of these target compounds were detected. All these detected compounds were below their odor thresholds, except for 2,4,6-TCAS and 2,4,6-TBAS wherein their concentrations were near their odor thresholds. However, in the two surface water samples, these detected compounds contributed to a certain amount of estrogenicity, which seemed to suggest that more attention should be paid to the issue of estrogenicity rather than to the odor problem.