Genotoxicity monitoring of freshwater environments using caged crayfish (Astacus leptodactylus)

Genotoxicity of freshwater pollution was assessed by measuring DNA damage in haemocytes of caged freshwater crayfish Astacus leptodactylus by the means of Comet assay and micronucleus test, integrated with the measurements of physiological (total protein concentration) and immunological (total haemocyte count) haemolymph parameters as biomarkers of undergone stress. Crayfish were collected at the reference site (River Mre?nica) and exposed in cages for 1 week at three polluted sites along the Sava River (Zagreb, Sisak, Krapje). The long term pollution status of these locations was confirmed by chemical analyses of sediments. Statistically significant increase in DNA damage measured by the Comet assay was observed at all three polluted sites comparing to the crayfish from reference site. In addition, native crayfish from the mildly polluted site (Krapje) cage-exposed on another polluted site (Zagreb) showed lower DNA damage than crayfish from the reference site exposed at the same location indicating adaptation and acclimatisation of crayfish to lower levels of pollution. Micronuclei induction showed similar gradient of DNA damage as Comet assay, but did not reach the statistical significance. Observed increase in total haemocyte count and total protein content in crayfish from polluted environments in the Sava River also confirmed stress caused by exposure to pollution. The results of this study have proved the applicability of caging exposure of freshwater crayfish A. leptodactylus in environmental genotoxicity monitoring using Comet assay and micronucleus test.     

Forest Naturalness: Criterion for Decision Support in Designation and Management of Protected Forest Areas

The article analyses the possibilities of developing an integrated indicator and a model of the assessment of forests naturalness using the data from the database of mountainous spruce forests situated in the Western Carpathians of Slovakia. The article presents two variants of such a model, one based on discriminant analysis, while the second one using an additive approach. The analysis of the data from mountainous spruce forests revealed significant indicators of forest naturalness degree: the arithmetic mean of the ratio between crown length and tree height, the deadwood volume, the coverage of grasses, the coverage of mosses and lichens, and the aggregation index. In addition, the coefficient of variation of tree diameters was included in the final model, since its presence in the model had a positive influence on the correctness of the classification of the forest naturalness degree. The correctness of the classification of the proposed discriminant model was 74.5%. For the additive model, the ranges of the values of the integrated indicator were defined for every degree of forest naturalness by taking into account the error ranges of the arithmetic mean values and the percentiles of the values in individual degrees of forest naturalness. The overall correctness of the classification with the additive model was 63.4%. In the second step, the scheme how to apply the classification model of the forest naturalness degree in the decision-making process of designating as a forest protected areas was proposed. In this scheme, the degree of forest naturalness is considered as a basic criterion for the determination of nature-conservation value of forest ecosystems. As further decision-making criteria we identified the possibility to restore, or the possibility to improve the naturalness of less natural forest ecosystems, which are designated as protected; the occurrence of the endangered species; and the occurrence of other natural values.     

Photosynthetic and biochemical characteristics of invasive species (<Emphasis Type="Italic">Ambrosia artemisiifolia L., Ambrosia trifida L.</Emphasis> and <Emphasis Type="Italic">Iva xanthifolia Nutt.</Emphasis>) depending on soil humidity and phenological phase

Environmental factors like temperature and soil humidity are recognized as influencing factors on photosynthetic response and organic productivity, distribution and biochemical characteristics of plants. Here we present measurements of gas exchange parameters, water-use efficiency (WUE) and nitrogen-use efficiency (NUE) of field-grown invasive species Ambrosia artemisiifolia L., Ambrosia trifida L. and Iva xanthifolia Nutt., in order to define their potentials as colonizers. Biogenic volatile organic compounds (BVOC) in leaves and flowers depending on soil humidity were also investigated.     

Effect of soil and sediment composition on acetochlor sorption and desorption

Background, aim, and scope  Herbicide fate and its transport in soils and sediments greatly depend upon sorption–desorption processes. Quantitative determination of herbicide sorption–desorption is therefore essential for both the understanding of transport and the sorption equilibrium in the soil/sediment–water system; and it is also an important parameter for predicting herbicide fate using mathematical simulation models. The total soil/sediment organic carbon content and its qualitative characteristics are the most important factors affecting sorption–desorption of herbicides in soil or sediment. Since the acetochlor is one of the most frequently used herbicides in Slovakia to control annual grasses and certain annual broad-leaved weeds in maize and potatoes, and posses various negative health effects on human beings, our aim in this study was to investigate acetochlor sorption and desorption in various soil/sediment samples from Slovakia. The main soil/sediment characteristics governing acetochlor sorption–desorption were also identified. Materials and methods  The sorption–desorption of acetochlor, using the batch equilibration method, was studied on eight surface soils, one subsurface soil and five sediments collected from the Laborec River and three water reservoirs. Soils and sediments were characterized by commonly used methods for their total organic carbon content, distribution of humus components, pH, grain-size distribution, and smectite content, and for calcium carbonate content. The effect of soil/sediment characteristics on acetochlor sorption–desorption was examined by simple correlation analysis. Results  Sorption of acetochlor was expressed as the distribution coefficient (K _d). K _d values slightly decreased as the initial acetochlor concentration increased. These values indicated that acetochlor was moderately sorbed by soils and sediments. Highly significant correlations between the K _d values and the organic carbon content were observed at both initial concentrations. However, sorption of acetochlor was most closely correlated to the humic acid carbon, and less to the fulvic acid carbon. The total organic carbon content was found to also significantly influence acetochlor desorption. Discussion  Since the strong linear relationship between the K _d values of acetochlor and the organic carbon content was already released, the corresponding K _oc values were calculated. Considerable variation in the K _oc values suggested that other soil/sediment parameters besides the total soil organic carbon content could be involved in acetochlor sorption. This was revealed by a significant correlation between the K _oc values and the ratio of humic acid carbon to fulvic acid carbon (C_HA/C_FA). Conclusions  When comparing acetochlor sorption in a range of soils and sediments, different K _d values which are strongly correlated to the total organic carbon content were found. Concerning the humus fractions, the humic acid carbon content was strongly correlated to the K _d values, and it is therefore a better predictor of the acetochlor sorption than the total organic carbon content. Variation in the K _oc values was attributed to the differences in distribution of humus components between soils and sediments. Desorption of acetochlor was significantly influenced by total organic carbon content, with a greater organic carbon content reducing desorption. Recommendations and perspectives  This study examined the sorption–desorption processes of acetochlor in soils and sediments. The obtained sorption data are important for qualitative assessment of acetochlor mobility in natural solids, but further studies must be carried out to understand its environmental fate and transport more thoroughly. Although, the total organic carbon content, the humus fractions of the organic matter and the C_HA/C_FA ratio were sufficient predictors of the acetochlor sorption–desorption. Further investigations of the structural and chemical characteristics of humic substances derived from different origins are necessary to more preciously explain differences in acetochlor sorption in the soils and sediments observed in this study.     

Deposition rates on smooth surfaces and coagulation of aerosol particles inside a test chamber

Because aerosol particle deposition is an important factor in indoor air quality, many empirical and theoretical studies have attempted to understand the process. In this study, we estimated the deposition rate of aerosol particles on smooth aluminum surfaces inside a test chamber. We investigated the influence of turbulent intensity due to ventilation and fan operation. We also investigated two important processes in particle deposition: turbophoresis, which is significant for micron particles, and coagulation, which is relevant to ultrafine particles (UFP diameter <0.1 μm) at high particle concentrations. Our analysis included semi-empirical estimates of the deposition rates that were compared to available deposition models and verified with simulations of an aerosol dynamics model. In agreement with previous studies, this study found that induced turbulent intensity greatly enhanced deposition rates of fine particles (FP diameter <1 μm). The deposition rate of FP was proportional to the ventilation rate, and it increased monotonically with fan speed. With our setup, turbophoresis was very important for coarse particles larger than 5 μm. The coagulation of aerosol particles was insignificant when the particle concentration was less than 10⁴ cm^?3 during fan operation. The model simulation results verified that the aerosol dynamics module incorporated in our Multi-Compartment and Size-Resolved Indoor Aerosol Model (MC-SIAM) was valid. The behavior of aerosol particles inside our chamber was similar to that found in real-life conditions with the same ventilation rates (0.018–0.39 h^?1) and similar air mixing modes. Therefore, our findings provide insight into indoor particle behavior.     

Soil burdens of persistent organic pollutants - Their levels, fate and risk. Part I. Variation of concentration ranges according to different soil uses and locations

Detailed soil screening data from the Czech Republic as a typical Central European country are presented here. Determination of a wide selection of organic and inorganic pollutants as well as an assessment of specific soil parameters allowed us to study the soil contamination in relation to the land use and soil properties. While HCHs and HCB were found at highest levels in arable soils, the higher concentrations of PCDDs/Fs, PCBs, PAHs and DDTs were observed in high altitude forest soils. Concentrations of these compounds strongly correlated with the soil organic carbon content. Several possible reasons have been suggested for the observed higher concentrations in mountain forest soils but the impact of each of these influencing factors remains to be identified. An inventory of the soil contamination is needed as a first step in our effort to estimate an extent to which the secondary sources contribute to the enhanced atmospheric levels of POPs.     

Effects of selected metal oxide nanoparticles on Artemia salina larvae: evaluation of mortality and behavioural and biochemical responses

The aim was to investigate the toxicity of selected metal oxide nanoparticles (MO-NPs) on the brine shrimp Artemia salina, by evaluating mortality and behavioural and biochemical responses. Larvae were exposed to tin(IV) oxide (stannic oxide (SnO₂)), cerium(IV) oxide (CeO₂) and iron(II, III) oxide (Fe₃O₄) NPs for 48 h in seawater, with MO-NP suspensions from 0.01 to 1.0 mg/mL. Mortality and behavioural responses (swimming speed alteration) and enzymatic activities of cholinesterase, glutathione-S-transferase and catalase were evaluated. Although the MO-NPs did not induce any mortality of the larvae, they caused changes in behavioural and biochemical responses. Swimming speed significantly decreased in larvae exposed to CeO₂ NPs. Cholinesterase and glutathione-S-transferase activities were significantly inhibited in larvae exposed to SnO₂ NPs, whereas cholinesterase activity significantly increased after CeO₂ NP and Fe₃O₄ NP exposure. Catalase activity significantly increased in larvae exposed to Fe₃O₄ NPs. In conclusion, swimming alteration and cholinesterase activity represent valid endpoints for MO-NP exposure, while glutathione-S-transferase and catalase activities appear to be NP-specific.     

Cyanotoxin management and human health risk mitigation in recreational waters

The occurrence and severity of harmful cyanobacterial or blue-green algal blooms (HABs) have increased in recent decades, posing a serious threat of illness to humans. In some countries, water contaminated with cyanotoxins that is used for drinking or haemodialysis has posed a particularly serious risk. However, it is now recognized that recreational exposure to natural toxins by skin contact, accidental swallowing of water or inhalation can also cause a wide range of acute or chronic illnesses. In this review, we focus on the importance of cyanotoxin management in recreational waters. The symptoms related with HAB poisonings, the recommended safety concentrations limit for cyanobacteria and cyanotoxins in such waters, as well as early health hazard indicators of their presence and their monitoring are all discussed. We also present in this review an overview of the methods developed in recent decades for eliminating cyanobacteria and the toxic compounds that they produce.     

Monitoring of trace elements in honey from the Republic of Macedonia by atomic absorption spectrometry

Contents of Zn, Cu, Fe, Mn, Cd, Na, K, Ca and Mg in 123 honey samples from different regions of the Republic of Macedonia were determined by atomic absorption spectrometry. A microwave digestion system was applied for digestion of the samples. The mean content for the elements determined was found to be: 2.252, 0.696, 1.885, 1.752, 0.004, 29.52, 984.8, 40.11, 18.24 mg kg(-1) for Zn, Cu, Fe, Mn, Cd, Na, K, Ca and Mg, respectively. Based on a comparison of statistical parameters, the spatial distribution of particular elements in Macedonian honey and the results of factor analysis, two natural and one anthropogenic geochemical associations were identified. The natural geochemical associations (Mg, Mn, Ca, K and Fe, Zn, Ca, -K, -Na) are influenced mainly by lithology. The anthropogenic associations (Cd and -Cu) are mostly a result of metallurgical activities, namely lead production in the town of Veles.