Geolocation of free-ranging fish on the European continental shelf as determined from environmental variables II. Reconstruction of plaice ground tracks

Between December 1993 and February 1997, 302 electronic data storage tags (DSTs), programmed to record depth at 10-min intervals and temperature daily, were attached to mature female plaice, Pleuronectes platessa, and released in the southern North Sea. Fifty tags were returned, 38 of which functioned fully and recorded 2,955 days of data. Twenty-seven tags recorded data over the full period at liberty, and 34 geographical ground tracks were reconstructed. Reconstruction was performed using a two-dimensional tidal stream simulation model that translated vertical movement of fish, recorded by DSTs, into horizontal movement assuming an initial down-tide swimming speed of 0.6 body lengths s^–1. Geographical accuracy of reconstructed tracks was assessed based on closeness of fit between (1) reconstruction endpoint and reported recapture position; (2) reconstructed locations and corresponding locations based on tidal data recorded by DSTs using the tidal location method (TLM; location of areas with similar tidal range and time of high water); and (3) DST temperature records and corresponding averaged sea surface temperature data records for corresponding locations. The results demonstrate that the assumptions of the tidal stream simulation model were sufficient to reconstruct geographically accurate representations of the migrations of individual plaice, which have in turn provided new information on the extent, duration, and directionality of movement. Our study demonstrates how DSTs can provide fishery-independent data with direct management applications in behaviourally driven, individual-based predictive models of fish migration.Communicated by J.P. Thorpe, Port Erin     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, -thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².

The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, α-thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

The environmental fate of the primary degradation products of alkylphenol ethoxylate surfactants in recycled paper sludge.

Alkylphenol ethoxylates (APEOs) are a group of non-ionic surfactants that are degraded microbially into more lipophilic degradation products with estrogenic potential, including nonylphenol monoethoxylate (NP1EO), nonylphenol diethoxylate (NP2EO), octylphenol (4-tOP) and nonylphenol (4-NP). Nonylphenol ethoxylates are used in paper recycling plants for de-inking paper and have the potential to be released into the environment through spreading of wastewater treatment sludge for soil amendment. Three samples of recycled paper sludge were collected from farmers' fields and analyzed for concentrations of NP1EO, NP2EO, 4-NP and 4-tOP. Each sample differed in the amount of time elapsed since the sludge was placed on farmers' fields. Primary degradation products of APEOs were present at low micrograms/g concentrations in the sludge samples. Differences in the concentrations of these analytes in sludge samples indicated that APEO concentrations declined by 84% over a period of 14 weeks on farmers' fields. Changes in the chromatographic patterns of acetylated 4-NP indicated that there is a group of recalcitrant nonylphenol isomers that degrades more slowly than other isomers. These data indicate that microbial degradation may reduce the risk of environmental contamination by these compounds, but more work is required to assess the toxic potential of APEOs in sludges used for soil amendment.     

Detection of polychlorinated biphenyls employing chemical dechlorination followed by biphenyl whole cell sensing system

Polychlorinated biphenyls (PCBs) are a mixture of 209 individual chlorinated compounds commonly known as PCB congeners. These compounds are hydrophobic and are persistent in the environment. Their use was banned in the US a few decades ago because of harmful health effects. Therefore, detection of PCBs in environmental samples is increasingly important. To that end, we have developed a two-step simple and sensitive method for the detection of total PCBs. Specifically, our method involves dechlorination of PCBs to biphenyl followed by detection of biphenyl using a whole cell sensing system as the detection system. The whole cell sensing system consists of cells of the strain Pseudomonas pseudoalcaligenes KF707 harboring plasmid pSD7000. Plasmid pSD7000 contains the gene of lacZ, a reporter protein under the control of the bph operon. The detection is achieved through the emission of light afforded by the expression of reporter protein triggered by the presence of biphenyl. Due to the fact that this operon is activated only by few PCB congeners, a chemical dechlorination method was employed to convert all PCBs to biphenyl, and thus all the PCBs present in a given sample are able to be detected. The results showed that PCB congeners were rapidly (30?min) and efficiently (>98.5%) dechlorinated to biphenyl using a Mg/K₂PdCl₆ catalyst, and the biphenyl could be subsequently quantified using the whole cell sensing system. This hybrid analytical method that combines classical dechlorination with novel biosensing methods may find applications in the on-site monitoring of PCBs contamination levels.     

Temporal patterns of populations in a warming world: a modelling framework

In this paper, we present an approach for describing the environmentally induced temporal pattern of structured populations by partial integro-differential equations. Populations are structured according to size or stage. Growth, energy allocation and stage transitions are affected by environmental conditions of which temperature, photoperiod, water depth and food supply were taken into account. The resulting modelling framework was applied to describe, analyse and predict alterations in populations with continuous development, populations with distinct state structures and interacting populations. Our exemplary applications consider populations of freshwater Amphipoda, Isopoda and Odonata. The model was capable of simulating life cycle alterations in dependence on temperature in interaction with other environmental factors: (1) population dynamics, (2) seasonal regulation, (3) water depth-dependent dispersal, (4) intraguild predation and (5) consumer-resource dynamics.     

Evaluating repeated patient handling injuries following the implementation of a multi-factor ergonomic intervention program among health care workers

Objective

The objective of this study was to evaluate repeated patient handling injuries following a multi-factor ergonomic intervention program among health care workers.

Methods

This was a quasi-experimental study which had an intervention group and a non-randomized control group. Data were collected from six hospitals in Saskatchewan, Canada from September 1, 2001 to December 1, 2006.

Results

A total of 1,480 individuals who had a previous injury were eligible for the study. Medium and small size hospitals in the intervention group had significantly fewer repeated injuries than in the control group. Multivariate analysis showed that the intervention group had 38.1% lower odds of having repeated injury compared to the control group, after adjusting for hospital size.

Conclusions

The work-related repeated injury after a multi-factor intervention program was reduced. The synergistic relationships between components of multi-factor intervention and applicability of injury prevention programs to different settings need to be further explored.

Impact on Industry

Implementing a multi-factor program with the right equipment and training can lower the risk of injury among health care workers.