Variation in certain characters and properties of scotch pine needles in geographic cultures

Morphophysiological and anatomical characters of needles that are used for characterizing infraspecific taxa have been studied in Scotch pine geographic cultures established in the forest-steppe zone of Siberia. Variation in these characters has been revealed, which reflects the polymorphic structure of the species and the effect of natural selection on the composition of populations in new natural-cimatic conditions.     

Uptake of deuterium by dead leaves exposed to deuterated water vapor in a greenhouse at daytime and nighttime

Dead leaves were exposed to deuterated water vapor (D(2)O) as a substitute of tritiated water (HTO) in a greenhouse at daytime and nighttime to examine uptake and release of tritium by dead leaves because they cover a wide area of the forest floor and are therefore a major target material to be exposed when HTO is atmospherically derived to the forest. The dead cedar needles showed faster uptake and faster release rates during and after the exposure than the fresh ones, and the equilibrium concentration of the dead cedar needles was about two times higher than the fresh ones, indicating a quick response and a high buffering potential of dead leaves. The relation between uptake of D(2)O and number of stoma was examined for dead deciduous leaves; the species with larger number of stoma accumulated more D(2)O at the daytime and nighttime exposures. However, drying of the dead leaves suppressed D(2)O uptake greatly at daytime, suggesting stomata's opening and closing controls the D(2)O uptake of dead leaves.     

Recent developments in the application of risk analysis to waste technologies

The European waste sector is undergoing a period of unprecedented change driven by business consolidation, new legislation and heightened public and government scrutiny. One feature is the transition of the sector towards a process industry with increased pre-treatment of wastes prior to the disposal of residues and the co-location of technologies at single sites, often also for resource recovery and residuals management. Waste technologies such as in-vessel composting, the thermal treatment of clinical waste, the stabilisation of hazardous wastes, biomass gasification, sludge combustion and the use of wastes as fuel, present operators and regulators with new challenges as to their safe and environmentally responsible operation. A second feature of recent change is an increased regulatory emphasis on public and ecosystem health and the need for assessments of risk to and from waste installations. Public confidence in waste management, secured in part through enforcement of the planning and permitting regimes and sound operational performance, is central to establishing the infrastructure of new waste technologies. Well-informed risk management plays a critical role. We discuss recent developments in risk analysis within the sector and the future needs of risk analysis that are required to respond to the new waste and resource management agenda.     

Local air quality management as a risk management process: assessing, managing and remediating the risk of exceeding an air quality objective in Great Britain

Air quality is managed in Great Britain via an effects-based, risk management process designed to provide a dynamic solution to public health issues associated with elevated concentrations of seven specified air pollutants. This paper is concerned with an examination and evaluation of the process of Local Air Quality Management (LAQM) in Great Britain from the late 1980s to date as a risk management process. The statutory basis of LAQM process is provided by the Environment Act 1995. The Act provides a framework in which national and local actions are required to identify and remediate areas of poor air quality. Within this framework, the implementation of the process at national and local levels is considered, leading to an identification and assessment of risks in the formulation and implementation of air quality management policy and practice. Local Authorities began the process of Review and Assessment in 1999 and the first round of the process concluded in 2001. Following this, some 129 Local Authorities declared one or more Air Quality Management Areas (AQMAs). The Review and Assessment elements of the framework were subjected to an evaluation in 2001 and the essential elements of it were confirmed as fit for purpose. The evaluation led to a confirmation of the process of LAQM but also a simplification based on the experience of Round 1. Now, a two step process is required comprising of an Updating and Screening Assessment and, where a risk of exceeding an Air Quality Objective (AQO) is identified, a Detailed Assessment follows. The Government has identified a time scale for Review and Assessment through to 2010 and also introduced the requirement of a regular Progress Report in order that a Local Authority is able to address routine matters of air quality management. The risks inherent in epidemiological or scientific uncertainty are factored into the LAQM process at an early stage of the process and, by identifying the risks and subjecting them to regular review, the process provides a 'level playing field' across spatial and temporal scales. Whilst the process of LAQM described in this paper has been developed for Great Britain, the generic elements of the process are applicable to other countries challenged by air pollution problems which require both national and local action to resolve them.     

Biogeochemical signatures in the lichen Hypogymnia physodes in the mid Urals

Multi-element content and uranium (U) isotopes were investigated in the lichen Hypogymnia physodes (native and transplants) sampled across a 60-km transect, centred on Karabash smelter town, from Turgoyak Lake (SW) to Kyshtym (NE) to investigate the origin of U. Kyshtym was the site of a major nuclear accident in 1957. (234)U/(238)U activity ratios in native thalli sampled during July 2001 were within the natural isotopic ratio in minerals. Uranium/thorium (U/Th) ratios were higher in native thalli towards the NE (average 0.73) than those in the SW (average 0.57). Element signatures in native thalli and transplants suggest U was derived from fossil fuel combustion from Karabash and sources lying further to the east. Systematic and significant U enrichment indicative of a nuclear fuel cycle source was not detected in any sample. Element signatures in epiphytic lichen transplants and native thalli provide a powerful method to evaluate U deposition.     

Anthropogenic radionuclides in sediment in the Japan Sea: distribution and transport processes of particulate radionuclides

Distributions of anthropogenic radionuclides ((90)Sr, (137)Cs and (239+240)Pu) in seabed sediment in the Japan Sea were collected during the period 1998-2002. Concentration of (90)Sr, (137)Cs and (239+240)Pu in seabed sediment was 0.07-1.6 Bq kg(-1), 0.4-9.1 Bq kg(-1) and 0.002-1.9 Bq kg(-1), respectively. In the northern basin of the sea (Japan Basin), (239+240)Pu/(137)Cs ratios in seabed sediment were higher and their variation was smaller compared to that in the southeastern regions of the sea. The higher (239+240)Pu/(137)Cs ratios throughout the Japan Basin were considered to reflect production of Pu-enriched particles in the surface layer and substantial sinking of particulate materials in this region. In the southern regions of the Japan Sea (<38 degrees N), both inventories and (239+240)Pu/(137)Cs ratios in sediment were larger than those in the other regions. In the southern Japan Sea, observations suggested that supply of particulate radionuclides by the Tsushima Warm Current mainly enhanced accumulation of the radionuclides in this region.     

Heavy metal deposition in the Italian “triangle of death” determined with the moss Scorpiurum circinatum

In this study, a biomonitoring project using the moss Scorpiurum circinatum was carried out to evaluate the deposition and biological effects of heavy metals in the area of Acerra (Naples, S Italy), one of the vertices of the sadly called “Italian triangle of death” owing to the dramatic increase in tumours. The results clearly indicated that the study area is heavily polluted by heavy metals, a large proportion of which is likely present in the atmosphere in particulate form. The ultrastructural organization of exposed samples was essentially preserved, but cell membrane pits, cytoplasm vesicles and concentric multilamellar/multivesicular bodies, probably induced by pollution, were found, which may be involved in the tolerance mechanisms to metal pollution in this moss species. Although severe biological effects were not found at the ultrastructural level in the exposed moss, effects on humans, especially after long-term exposure, are to be expected.     

The stable isotope signature of methane emitted from plant material under UV irradiation

Recent experiments have shown that dry and fresh leaves, other plant matter, as well as several structural plant components, emit methane upon irradiation with UV light. Here we present the source isotope signatures of the methane emitted from a range of dry natural plant leaves and structural compounds. UV-induced methane from organic matter is strongly depleted in both ¹³C and D compared to the bulk biomass. The isotopic content of plant methoxyl groups, which have been identified as important precursors of aerobic methane formation in plants, falls roughly halfway between the bulk and CH₄ isotopic composition. C3 and C4/CAM plants show the well-established isotope difference in bulk ¹³C content. Our results show that they also emit CH₄ with different δ¹³C value. Furthermore, δ¹³C of methoxyl groups in the plant material, and ester methoxyl groups only, show a similar difference between C3 and C4/CAM plants. The correlation between the δ¹³C of emitted CH₄ and methoxyl groups implies that methoxyl groups are not the only source substrate of CH₄.Interestingly, δD values of the emitted CH₄ are also found to be different for C3 and C4 plants, although there is no significant difference in the bulk material. Bulk δD analyses may be compromised by a large reservoir of exchangeable hydrogen, but no significant δD difference is found either for the methoxyl groups, which do not contain exchangeable hydrogen. The δD difference in CH₄ between C3 and C4 plants indicates that at least two different reservoirs are involved in CH₄ emission. One of them is the OCH₃ group, the other one must be significantly depleted, and contribute more to the emissions of C3 plants compared to C4 plants. In qualitative agreement with this hypothesis, CH₄ emission rates are higher for C3 plants than for C4 plants.     

Solar driven nitrous acid formation on building material surfaces containing titanium dioxide: A concern for air quality in urban areas?

The photoenhanced uptake of nitrogen dioxide (NO₂) to the surface of commercially available self-cleaning window glass has been studied under controlled laboratory conditions. This material is one of an array of modern building products which incorporate titanium dioxide (TiO₂) nanoparticles and are finding increasing use in populated urban areas. Amongst the principal drivers for the use of these materials is that they are thought to facilitate the irreversible removal of pollutants such as NO₂ and organic molecules from the atmosphere and thus act to remediate air quality. While it appears that TiO₂ materials do indeed remove organic molecules from built environments, in this study we show that the photoenhanced uptake of NO₂ to one example material, self-cleaning window glass, is in fact accompanied by the substantial formation (50–70%) of gaseous nitrous acid (HONO). This finding has direct and serious implications for the use of these materials in urban areas. Not only is HONO a harmful respiratory irritant, it is also readily photolysed by solar radiation leading to the formation of hydroxyl radicals (OH) together with the re-release of NO_x as NO. The net effect of subsequent OH initiated chemistry can then be the further degradation of air quality through the formation of secondary pollutants such as ozone and VOC oxidation products. In summary, we suggest that a scientifically conceived technical strategy for air quality remediation based on this technology, while widely perceived as universally beneficial, could in fact have effects precisely opposite to those intended.