Effect of Recycling on Material Properties of Glass-filled Polyethylene Terephthalate

Recycled plastics are considered low performance materials because their properties are expected to decrease drastically with recycling. The objective of this study was to characterize a 15 wt.% glass filled polyethylene terephthalate (rPET-15GF) using six recycle generations and four recycle ratios. Mechanical properties such as tensile strength, elastic modulus, and percent elongation to failure of the PET composite were determined for various recycle generations and recycle ratios. Results show that the mechanical properties of rPET-15GF decrease slightly per recycle generation. In contrast, thermal properties of rPET-15GF were not at all affected by the recycling process. This data demonstrates that recycled glass filled PET can be used effectively to fabricate components without significantly affecting their mechanical performance.     

Monitored natural attenuation forum: The case for abiotic MNA

The environmental fate and transport of chlorinated volatile organic compounds (VOCs) is controlled by the physical and chemical properties of the compound and the nature of the subsurface media through which the compound is migrating. Several processes (advection, dispersion, diffusion, biodegradation, and abiotic degradation, to name a few) result in a reduction in concentration and/or mass of contaminants in groundwater. Of these processes, biodegradation is often considered the dominant destructive attenuation mechanism for chlorinated VOCs. However, chlorinated VOCs can also degrade through abiotic processes and, in some cases, may be the primary or only destructive process occurring. © 2007 Wiley Periodicals, Inc.     

Emotional intelligence and individual performance: evidence of direct and moderated effects

We examined the direct and moderated effects of an ability‐based measure of emotional intelligence (MSCEIT© V2.0) on individual performance in a sample of business undergraduates. Controlling for general mental ability and personality, emotional intelligence explained unique incremental variance in performance ratings on only one of two measures of interpersonal effectiveness (public speaking effectiveness). However, the interaction of emotional intelligence with conscientiousness explained unique incremental variance both in public speaking and group behavior effectiveness, as well as academic performance (cumulative GPA). We conclude that the effects of emotional intelligence on performance are more indirect than direct in nature. Individuals must not only have emotional intelligence, but also must be motivated to use it. Copyright © 2006 John Wiley & Sons, Ltd.     

Water Network Synthesis Using Mutation-Enhanced Particle Swarm Optimization

Different techniques for the synthesis of industrial water reuse/recycle networks have been developed in recent process integration research. These tools range from graphical pinch analysis approaches to mathematical programming models. The latter have the advantage of being flexible enough to incorporate various water network constraints, but in many cases these are often non-linear, thus making the identification of global optima difficult. Recent work has demonstrated the effectiveness of metaheuristic algorithms such as particle swarm optimization (PSO), for finding good solutions these problems. This work describes the use of a modified PSO for solving mixed integer non-linear programming (MINLP) models for water network synthesis. By incorporating a mutation operator for the binary variables in the model, the algorithm is able to escape sub-optimal network topologies and proceed towards better solutions than can be found with ordinary PSO. Two case studies involving water recycle/reuse are used to demonstrate the new design methodology.     

COMPARATIVE EVALUATION OF THREE URBAN RUNOFF MODELS1

ABSTRACT: Three urban runoff models, namely, the Road Research Laboratory Model (RRLM), the Storm Water Management Model (SWMM) and the University of Cincinnati Urban Runoff Model (UCURM), were examined by comparing the model simulated hydrographs with the hydrographs measured on several instrumented urban watersheds. This comparison was done for the hydrograph peak points as well as for the entire hydrographs using such statistical measures as the correlation coefficient, the special correlation coefficient and the integral square error. The results of the study indicated that, when applying the three selected non-calibrated models on small urban catchments, the SWM model performed marginally better than the RRL model and both these models were more accurate than the UCUR model. On larger watersheds, the comparisons between the SWM model and the other two models would be likely even more favourable for the SWM model, because it has the most advanced flow routing scheme among the studied models.     

Sample intake position and loading rates from nonpoint source pollution

Paired water samples were simultaneously activated from two different vertical positions within the approach section of a flow-control structure to determine the effect of sample intake position on nonpoint runoff parameter concentrations and subsequent event loads. Suspended solids (SS), total phosphorus (TP) and organic plus exchangeable nitrogen [(Or+Ex)-N] were consistently higher throughout each runoff event when sampled from the floor of the approach section as opposed to those samples taken at midstage. Dissolved molybdate reactive phosphorus (DMRP) and ammonium (NH₄-N) concentrations did not appear to be significantly affected by the vertical difference in intake position. However, the nitrate plus nitrite nitrogen [(NO₃+NO₂)-N] concentrations were much higher when sampled from the midstage position.Although the concentration differences between the two methods were not appreciable, when evaluated in terms of event loads, discrepancies were evident for all parameters. Midstage sampling produced event loads for SS, TP, (Or + Ex)–N, DMRP, NH₄-N, and (NO₃+NO₂)-N that were 44,39,35,80,71, and 181%, respectively, of floor sampling loads. Differences in loads between the two methods are attributed to the midstage position, sampling less of the bed load. The correct position will depend on the objective; however, such differences should be recognized during the design phase of the monitoring program.This work was supported by the Soil Science Department, College of Agriculture and Life Sciences, University of Wisconsin-Madison, and by the U.S. Environmental Protection Agency, Region V., Chicago, Illinois (Grant No. G005139-01).     

WATER MULTIPLIERS - REGIONAL IMPACT ANALYSIS1

A significant research problem is the assessment of impacts associated with growth and/or decline in a regional economy. A relevant method for analyzing such problems is the Leontief input/output model. Associated with these models are economic multipliers measuring total changes in sales, income, and employment. In this paper, the author contends resource multipliers are equally relevant. The specific form of these multipliers are defined. Water multipliers for a two-county region in central Nevada are presented and their uses described.     

EFFICIENCY PROBLEMS FROM USER FEES IN MUNICIPAL WASTEWATER TREATMENT1

ABSTRACT: The Environmental Protection Agency administers a construction grant program to encourage abatement of wastewater pollution by sharing with municipalities the costs of wastewater treatment facilities. The enabling legislation (P.L. 92–500) specifies that EPA's cost share will be 75% of construction costs. It further requires municipalities to collect user fees from industrial users of the facilities to repay that part of the federal grant allocable to the treatment of industrial wastewater. The municipality must return half of the user fees collected to the U.S. Treasury; the municipality is allowed to retain the remaining half. Retention by municipalities of these user fees lowers their effective cost shares and results in the following consequences: (1) a bias for municipalities to select certain kinds of abatement techniques regardless of whether or not they are the least-cost techniques from the national perspective; (2) a bias for municipalities to select larger-than-optimal scales of abatement facilities; (3) a hidden federal subsidy to industry; and (4) grants that favor industrial communities. This article examines the legislative and regulatory requirements for user charges, derives the algebraic expressions for calculating the real federal, municipal, and industrial cost shares with user fees; computes municipal cost shares for selected values of the determinant factors; evaluates efficiency and other consequences of current user fee arrangements; and concludes that the efficiency distortions brought about by the impacts of user fees on cost sharing could be eliminated by requiring that all user fees collected from industry against the federal cost share be returned to the U.S. Treasury.