The influence of sewage sludge properties on sludge-borne metal availability

With the advent of more stringent controls on wastewater treatment, sewage sludge production in Europe and many parts of the world is increasing. With this increase comes the problem of sludge disposal, and recycling to land arguably offers an economically and environmentally sustainable option. However, a major limitation of sewage sludge reuse is the potential release of heavy metals from the sludge and heavy metal accumulation to toxic levels in topsoils. The properties of the sludge play a crucial role in determining the initial release and subsequent availability of heavy metals in amended soils. Bioavailable forms of heavy metals in recently amended soils are most likely to be those that are bioavailable in the sewage sludge. In this paper, published research on the importance of sewage sludge characteristics on metal release and bioavailability will be reviewed and contrasted with original research. A selection of sludges from around Australia has been collected for this purpose. Through the use of incubation studies, isotope dilution techniques, ion-selective electrode measurements and ¹³C-NMR spectroscopy, the importance of a range of sludge properties on heavy metal behaviour in sludges and sludge-amended soils is addressed.     

Trace element speciation in selected smelter-contaminated soils in Anaconda and Deer Lodge Valley, Montana, USA

Long-term copper smelting in the Anaconda and Deer Lodge Valley area of Montana has resulted in an extensive area of trace element contamination. Aerial extent of contamination is generally established, but total analysis of soils does not correlate to relative degree of impact on vegetation growth. Three pedons (Beaverell, Cetrack and Judco) were analyzed by routine soil characterization methods, aqua regia microwave digestion, sequential chemical extraction, and X-ray diffraction analysis with the objective of providing a better understanding of chemical forms and potential reactivity of selected trace elements (Cd, Co, Cr, Cu, Hg, Mn, Ni, P, Pb). Surface horizons of soils are more acidic than subsoils, with pH for all horizons ranging from 4.0 to 8.7. Beaverell is the most contaminated in the upper 20 cm with the sum of total extractable (SUM_TE) trace elements by microwave digestion ranging from 1836 to 3605 mg kg⁻¹, largest H₂O-soluble (WS) and exchangeable (EX) fractions (e.g. 1.6 and 9.3%, respectively), and smallest residual (RES) fraction (e.g. 14.3%). Cetrack has greater SUM_TE elements than Judco, though a lower WS+EX fraction due to the effects of alkaline pH, carbonates and high P. Oxide (OX), organic matter/sulfide (OM/S), and RES fractions predominate over WS, EX, and specially-sorbed/carbonate-bound fractions (SS/CAR) for all horizons. Copper, Zn, Pb and Cd are elevated in surface over subsurface horizons in these latter fractions, indicating these elements were anthropogenic additions. X-ray data indicate that Pb, Cu, Cr and Cd partially exists as both OX and sulfide mineral forms.     

Vocal acrobatics in a Chinese frog, <Emphasis Type="Italic">Amolops tormotus</Emphasis>

Although amphibians are highly vocal, they generally emit only a limited number of acoustic communication signals. We report here the extraordinarily rich vocal repertoire of Amolops tormotus, a ranid species in China. These frogs produce countless vocalizations, some of which share features of birdsong or primate calls, e.g., ultrasonic frequency components, multiple upward and downward FM sweeps, and sudden onset and offset of selective harmonic components within a call note. Frame-by-frame video analysis of the frog's calling behavior suggests the presence of two pairs of vocal sacs that may contribute to the remarkable call-note complexity in this species. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00114-002-0335-x.     

Inventory of emissions from major air pollutant categories in Turkey

In this study, an inventory of air pollutant emission estimates from major air polluting sources in Turkey for period between 1985 and 2005 with 5-year intervals were estimated. Inventory covers anthropogenic sources of five major air pollutants of particulate matter, sulfur dioxide, carbon monoxide, nitrogen oxides and non-methane volatile organic compounds. Their break-down with respect to main activity sectors were shown and their distribution by the largest industrial source categories were worked out as annual estimates. This inventory and its analysis point to serious environmental implications of air pollutants and a need to develop a policy plan for reducing these emissions.     

Foreword

Mitigation and Adaptation Strategies for Global Change -     

Greenhouse Gas Inventory for Land Use Change and Forestry in Finland Based on International Guidelines

Mitigation and Adaptation Strategies for Global Change - Guidelines of the Intergovernmental Panel on Climate Change (IPCC) were used to assess a greenhouse gas inventory for land use change and...     

Utilisation of bubble resonance phenomena to improve gas–liquid contact

 In several branches of science and technology a gaseous phase is dispersed into a liquid in the form of bubbles, a gaseous component then dissolves into the liquid and subsequently undergoes chemical reaction. The overall process performance can be improved substantially when the area of gas–liquid contact is increased. By subjecting the liquid phase to low frequency vibrations, the bubbles are shown to suffer significant breakage, induced by resonance. When the vibration is properly tuned, the interfacial area is found to increase by a factor of 1.8–2.4, depending on the properties of the liquid. Resonance-induced bubble breakage phenomena have a great potential for improving the rates of chemical processes involving fast reactions, with minimal energy input. Received: 7 July 2000 / Accepted in revised form: 28 August 2000     

Groundwater pollution due to discharge of tannery effluents in Upper Palar basin, Tamilnadu, India: an assessment through mass transport modeling

The groundwater regime in Upper Palar basin, Tamilnadu has been highly contaminated in several locations due to discharge of effluents from a large number of tanneries. At some places total dissolved solids (TDS) concentration in groundwater was found as high as 8000 mg/l. Transmissivity and storativity of the regional aquifer were estimated at a few locations. The porosity and dispersivity values were not determined in the field. These parameters were assumed based on data available for similar geological formations elsewhere. The aquifer conceptualization thus arrived at formed the basis of a numerical groundwater flow model which was constructed using the finite difference method. The flow model was calibrated for steady state and then for transient condition for the period of 1984-92. The computed heads and calibrated parameters of the flow model were used to compute groundwater velocities. The migration of contaminants for a 20 year period was computed using the hydraulic heads and effective porosity value in a pathline model using FLOWPATH software. Mass transport model was constructed using Method of Characteristics (MOC) computer code in a separate model. The seepage rate of effluent is assumed at a rate of 30% of that discharged on the surface. The mass concentration of solute in the effluent reaching the water table was assumed as 40%, the same as in the surface effluent. The mass transport model was calibrated for a 20 year period. Prediction of contaminant migration from different clusters in the basin was analyzed. The prediction results indicated elevated TDS concentration of more than 4000 mg/l from most clusters. Also the area of the contaminated zone is likely to double in 20 years from contaminated zone of 1992.