Hexachlorocyclohexane (HCH) as new Stockholm Convention POPs��a global perspective on the management of Lindane and its waste isomers

Purpose

Hexachlorocyclohexane (HCH) isomers (??-, ??- and ??- (Lindane)) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention, and therefore, the legacy of HCH and Lindane production became a contemporary topic of global relevance. This article wants to briefly summarise the outcomes of the Stockholm Convention process and make an estimation of the amount of HCH waste generated and dumped in the former Lindane/HCH-producing countries.

Results

In a preliminary assessment, the countries and the respective amount of HCH residues stored and deposited from Lindane production are estimated. Between 4 and 7 million tonnes of wastes of toxic, persistent and bioaccumulative residues (largely consisting of alpha- (approx. 80%) and beta-HCH) are estimated to have been produced and discarded around the globe during 60 years of Lindane production. For approximately 1.9 million tonnes, information is available regarding deposition. Countries are: Austria, Brazil, China, Czech Republic, France, Germany, Hungary, India, Italy, Japan, Macedonia, Nigeria, Poland, Romania, Slovakia, South Africa, Spain, Switzerland, Turkey, The Netherlands, UK, USA, and former USSR. The paper highlights the environmental relevance of deposited HCH wastes and the related POPs?? contaminated sites and provides suggestions for further steps to address the challenge of the legacy of HCH/Lindane production.

Conclusion

It can be expected that most locations where HCH waste was discarded/stockpiled are not secured and that critical environmental impacts are resulting from leaching and volatilisation. As parties to the Stockholm Convention are legally required to take action to stop further POPs pollution, identification and evaluation of such sites are necessary.     

Contamination of nonylphenolic compounds in creek water, wastewater treatment plant effluents, and sediments from Lake Shihwa and vicinity, Korea: comparison with fecal pollution

Nonylphenolic compounds (NPs), coprostanol (COP), and cholestanol, major contaminants in industrial and domestic wastewaters, were analyzed in creek water, wastewater treatment plant (WWTP) effluent, and sediment samples from artificial Lake Shihwa and its vicinity, one of the most industrialized regions in Korea. We also determined mass discharge of NPs and COP, a fecal sterol, into the lake, to understand the linkage between discharge and sediment contamination. Total NP (the sum of nonylphenol, and nonylphenol mono- and di-ethoxylates) were 0.32-875 μg L⁻¹ in creeks, 0.61-87.0 μg L⁻¹ in WWTP effluents, and 29.3-230 μg g⁻¹ TOC in sediments. Concentrations of COP were 0.09-19.0 μg L⁻¹ in creeks, 0.11-44.0 μg L⁻¹ in WWTP effluents, and 2.51-438 μg g⁻¹ TOC in sediments. The spatial distributions of NPs in creeks and sediments from the inshore region were different from those of COP, suggesting that Lake Shihwa contamination patterns from industrial effluents differ from those from domestic effluents. The mass discharge from the combined outfall of the WWTPs, located in the offshore region, was 2.27 kg d⁻¹ for NPs and 1.00 kg d⁻¹ for COP, accounting for 91% and 95% of the total discharge into Lake Shihwa, respectively. The highest concentrations of NPs and COP in sediments were found in samples at sites near the submarine outfall of the WWTPs, indicating that the submarine outfall is an important point source of wastewater pollution in Lake Shihwa.     

The formation of bound residues of diazinon in four UK soils: implications for risk assessment

The behaviour of diazinon in the soil determines the likelihood of further pollution incidents, particularly leaching to water. The most significant processes in the control of the fate of diazinon in the soil are microbial degradation and the formation of bound residues. Soils from four sites in the UK were amended with diazinon and its ¹⁴C labelled analogue and incubated for 100 days. After 0, 10, 21, 50 and 100 days, the formation of bound residues was assessed by solvent extraction, and the microbial degradation of diazinon by mineralisation assay. In microbially active soils, diazinon is degraded rapidly, reducing the risk of future pollution incidents. However, where there was limited mineralisation there was also significantly lower formation of bound residues, which may lead to water pollution via leaching. The formation of bound residues was dependent on extraction type. Acetonitrile extraction identified bound residues in all soils, with the bound residue fraction increasing with increasing incubation time.     

Impact of carbon nanomaterials on the behaviour of 14C-phenanthrene and 14C-benzo-[a] pyrene in soil

The impact of fullerene soot (FS), single-walled (SWCNTs) and multi-walled (MWCNTs) carbon nanotubes on the behaviour of two ¹⁴C-PAHs in sterile soil was investigated. Different concentrations of carbon nanomaterials (0, 0.05, 0.1 and 0.5%) were added to soil, and ¹⁴C-phenanthrene and ¹⁴C-benzo[a]pyrene extractability assessed over 80 d through dichloromethane (DCM) and hydroxypropyl-β-cyclodextrin (HPCD) shake extractions. Total ¹⁴C-PAH activity in soils was determined by combustion, and mineralisation of ¹⁴C-phenanthrene was monitored over 14 d, using a catabolically active pseudomonad inoculum. No significant loss of ¹⁴C-PAH-associated activity from CNM-amended soils was observed over the ‘aging’ period. CNMs had a significant impact on HPCD-extractability of ¹⁴C-PAHS; extractability decreased with increasing CNM concentration. Additionally, ¹⁴C-phenanthrene mineralisation was inhibited by the presence of CNMs at concentrations of ≥0.05%. Differences in overall extents of ¹⁴C-mineralisation were also apparent between CNM types. It is suggested the addition of CNMs to soil can reduce PAH extractability and bioaccessibility, with PAH sorption to CNMs influenced by CNM type and concentration.     

Mass balances and life cycle inventory of home composting of organic waste

A comprehensive experimental setup with six single-family home composting units was monitored during 1 year. The composting units were fed with 2.6-3.5 kg organic household waste (OHW) per unit per week. All relevant consumptions and emissions of environmental relevance were addressed and a full life-cycle inventory (LCI) was established for the six home composting units. No water, electricity or fuel was used during composting, so the major environmental burdens were gaseous emissions to air and emissions via leachate. The loss of carbon (C) during composting was 63-77% in the six composting units. The carbon dioxide (CO(2)) and methane (CH(4)) emissions made up 51-95% and 0.3-3.9% respectively of the lost C. The total loss of nitrogen (N) during composting was 51-68% and the nitrous oxide (N(2)O) made up 2.8-6.3% of this loss. The NH(3) losses were very uncertain but small. The amount of leachate was 130 L Mg(-1) wet waste (ww) and the composition was similar to other leachate compositions from home composting (and centralised composting) reported in literature. The loss of heavy metals via leachate was negligible and the loss of C and N via leachate was very low (0.3-0.6% of the total loss of C and 1.3-3.0% of the total emitted N). Also the compost composition was within the typical ranges reported previously for home composting. The level of heavy metals in the compost produced was below all threshold values and the compost was thus suitable for use in private gardens.     

The influence of socioeconomic, environmental, and demographic factors on municipality-scale land-cover change in Mexico

Land-cover change is the result of complex multi-scale interactions between socioeconomic, demographic, and environmental factors. Demographic change, in particular, is thought to be a major driver of forest change. Most studies have evaluated these interactions at the regional or the national level, but few studies have evaluated these dynamics across multiple spatial scales within a country. In this study, we evaluated the effect of demographic, environmental, and socioeconomic variables on land-cover change between 2001 and 2010 for all Mexican municipalities (n?=?2,443) as well as by biome (n?=?4). We used a land-cover classification based on 250-m MODIS data to examine the change in cover classes (i.e., woody, mixed woody, and agriculture/herbaceous vegetation). We evaluated the trends of land-cover change and identified the major factors correlated with woody vegetation change in Mexico. At the national scale, the variation in woody vegetation was best explained by environmental variables, particularly precipitation; municipalities where woody cover increased tended to be in areas with low average annual precipitation (i.e., desert and dry forest biomes). Demographic variables did not contribute much to the model at the national scale. Elevation, temperature, and population density explained the change in woody cover when municipalities were grouped by biome (i.e., moist forest, dry forest, coniferous forest, and deserts). Land-cover change at the biome level showed two main trends: (1) the tropical moist biome lost woody vegetation to agriculture and herbaceous vegetation, and (2) the desert biome increased in woody vegetation within more open-canopy shrublands.     

Estrogenic and androgenic activities in total plasma measured with reporter-gene bioassays: relevant exposure measures for endocrine disruptors in epidemiologic studies?

Measurements of estrogenic and androgenic activities in total plasma with Chemically Activated LUciferase gene eXpression (CALUX?) bioassays could provide biologically relevant measures for exposure to endocrine disruptors in epidemiologic studies. The objective of this study was to explore the effects of a variety of sources of potential endocrine disruptors on estrogenic and androgenic activities in total plasma measured by CALUX?. Plasma samples and interview data on sources of potential endocrine disruptors were collected from 108 men with different exposures profiles. CALUX? measurements (BioDetection Services) involved human U2-OS cell lines controlled by the estrogen receptor alpha and the androgen receptor. Mean differences (beta) in 17β-estradiol equivalents (EEQs) and dihydrotestosterone equivalents (AEQs) between exposure groups were estimated using general linear models. Mean plasma AEQs and EEQs were 9.1×10(-1)ng/ml and 12.0pg/ml, respectively. Elevated AEQs were found in smokers (beta 1.9 (95%CI 0.1-3.6)×10(-1)ng/ml) and heavy drinkers (1.4 (0.2-3.1)×10(-1)ng/ml), and in men occupationally exposed to disinfectants (1.6 (0.3-3.5)×10(-1)ng/ml) or welding/soldering fumes (1.4 (-0.2-2.9)×10(-1)ng/ml). Occupational exposure to pesticides, disinfectants, and exhaust fumes seemed to be associated with increased plasma EEQs: 1.5 (-0.2-3.2)pg/ml, 2.1 (0.2-3.9)pg/ml, and 2.9 (0.6-5.2)pg/ml, respectively. Moderate to high plasma dioxin levels, measured in a subgroup by the dioxin-responsive CALUX?, were accompanied by a 20% increase in AEQs. This is the first study in which CALUX? was used to assess hormone activities in total plasma. Although the results are not yet readily interpretable, they indicate that these measurements can be valuable for epidemiologic studies on endocrine disruptors and give direction for further research.     

Effect of americium-241 on luminous bacteria. Role of peroxides

The effect of americium-241 (²⁴¹Am), an alpha-emitting radionuclide of high specific activity, on luminous bacteria Photobacterium phosphoreum was studied. Traces of ²⁴¹Am in nutrient media (0.16-6.67 kBq/L) suppressed the growth of bacteria, but enhanced luminescence intensity and quantum yield at room temperature. Lower temperature (4 °C) increased the time of bacterial luminescence and revealed a stage of bioluminescence inhibition after 150 h of bioluminescence registration start. The role of conditions of exposure the bacterial cells to the ²⁴¹Am is discussed. The effect of ²⁴¹Am on luminous bacteria was attributed to peroxide compounds generated in water solutions as secondary products of radioactive decay. Increase of peroxide concentration in ²⁴¹Am solutions was demonstrated; and the similarity of ²⁴¹Am and hydrogen peroxide effects on bacterial luminescence was revealed. The study provides a scientific basis for elaboration of bioluminescence-based assay to monitor radiotoxicity of alpha-emitting radionuclides in aquatic solutions.     

Water-soluble matter in PM2.5 in a coastal city over China: Chemical components, optical properties, and source analysis

Although marine and terrestrial emissions simultaneously affect the formation of atmospheric fine particles in coastal areas, knowledge on the optical properties and sources of water-soluble matter in these areas is still scarce. In this work, taking Qingdao, China as a typical coastal location, the chemical composition of PM_2.5 during winter 2019 was analyzed.Excitation-emission matrix fluorescence spectroscopy was combined with parallel factor analysis model to explain the component...     

Improvement of electrical resistivity tomography for leachate injection monitoring

Leachate recirculation is a key process in the scope of operating municipal waste landfills as bioreactors, which aims to increase the moisture content to optimize the biodegradation in landfills. Given that liquid flows exhibit a complex behaviour in very heterogeneous porous media, in situ monitoring methods are required. Surface time-lapse electrical resistivity tomography (ERT) is usually proposed. Using numerical modelling with typical 2D and 3D injection plume patterns and 2D and 3D inversion codes, we show that wrong changes of resistivity can be calculated at depth if standard parameters are used for time-lapse ERT inversion. Major artefacts typically exhibit significant increases of resistivity (more than +30%) which can be misinterpreted as gas migration within the waste. In order to eliminate these artefacts, we tested an advanced time-lapse ERT procedure that includes (i) two advanced inversion tools and (ii) two alternative array geometries. The first advanced tool uses invariant regions in the model. The second advanced tool uses an inversion with a “minimum length” constraint. The alternative arrays focus on (i) a pole–dipole array (2D case), and (ii) a star array (3D case). The results show that these two advanced inversion tools and the two alternative arrays remove almost completely the artefacts within +/?5% both for 2D and 3D situations. As a field application, time-lapse ERT is applied using the star array during a 3D leachate injection in a non-hazardous municipal waste landfill. To evaluate the robustness of the two advanced tools, a synthetic model including both true decrease and increase of resistivity is built. The advanced time-lapse ERT procedure eliminates unwanted artefacts, while keeping a satisfactory image of true resistivity variations. This study demonstrates that significant and robust improvements can be obtained for time-lapse ERT monitoring of leachate recirculation in waste landfills.