放射性核素在海水、底质及海洋生物间的转移--Ⅰ.核素进入海水后的初始状态

作者在建立的人工小生境中,研究了具有生态学意义的~(137)Cs、~(134)Cs、~(65)Zn、~(60)Co、~(59)Fe、~(54)Mn等核素在海水、底质及海洋生物间的转移规律.本文是该项研究的第一部分,研究悬浮物、底质对核素的富集和吸附,考察了核素进入海水后的初始状态.     

抚顺市空气可吸入颗粒物特征的研究

于2002年1～7月份在抚顺市区四个点位采集了环境空气中的可吸入颗粒物样品，经分析后获得了可吸入颗粒物组分的时间分布和空间分布特征，即采暖期PM10样品中有机碳（OC）、元素碳（EC）的绝对含量和相对含量均高于非采暖期，工业区PM10样品中的Fe、Zn、Pb的绝对含量和相对含量均明显高于其它点位，反映了其工业区的特点。     

饮用水反硝化脱氮方法研究

为去除饮用水中的硝酸盐氮(NO3ˉ-N)，采用上流式厌氧污泥床(UASB)反应器和固定化微生物进行异养反硝化；自制固定化反硝化菌涂层电极和生物电化学脱氮装置，并用于自养反硝化。试验结果表明。若以甲醇为碳源。当碳氮比(C／N)≥1．o时，室温下经UASB处理4h，NO3ˉ-N去除率为97．7％；若以乙酸为碳源。当C／N≥1．0时，30C下经固定化微生物处理6h，N03ˉ-N去除率为98．6％；在无外加碳源的条件下处理东湖现场水样，30C下经60h后。N03ˉ-N去除率达93．5％。生物电化学脱氮装置可迅速建立自养反硝化菌所需的厌氧环境，水样在室温下经72h处理，脱氮率达96．3％。     

染料生物吸附影响因素与解吸条件研究

用筛选出的一株丝状真菌(GX2)对活性、酸性、碱性和直接染料进行吸附及解吸的试验结果表明，该菌株对活性、酸性和直接染料有较高的吸附率，但碱性染料难被吸附；在多种有机溶剂中，丙酮是较好的解吸剂，碱性介质有利于染料的解吸；对菌体进行破碎及在解吸过程中加以搅拌有利于解吸过程的进行。     

宁波台地倾斜在皎口地震活动中的前兆反应特征

通过对宁波台地倾斜近几年来观测资料的分析，发现其在皎口几组地震事件前有不同程度的异常反应。在分量图上，震前出现了短临期前兆异常反应特征，并且有异常时间越长，幅度越大，地震震级就越高的特点。此外还对异常出现的成因作了探讨     

熔融-水热法合成粉煤灰沸石及其吸附性能研究

以粉煤灰为原料,研究了在熔融温度分别为 300 ℃、 400 ℃、 500 ℃,熔融时间分别为 1 h、 2 h、 3 h,水热温度分别为 45 ℃、 65 ℃、 85 ℃,水热时间分别为 6 h、 8 h、 10 h,对合成粉煤灰沸石( FZ)吸附性能的影响.结果表明熔融温度为 300 ℃,熔融保温时间为 1 h,水热温度为 65 ℃,水热保温时间为 6 h,产物中有类沸石生成.熔融-水热合成 FZ对 Cd2+吸附率为 99.82%,吸附量为 0.199 64 mg/g,略高于活性炭(吸附率 99.69%)优于天然沸石(吸附率 97.94%).     

道路交通安全和谐管理新模式

针对我国交通安全管理现状及存在问题,提出交通安全和谐管理理念,建立了交通安全和则、谐则体系及和谐互耦的基本管理架构,讨论了交通安全和谐的运作机制及相应的系统。在政策立法、控制手段、管理手段等方面,建立交通安全管理的和则、谐则体系及其耦合机制,通过双规则耦合互动,实现人、车、路与环境之间的和谐统一,以期提高交通安全管理的水平和运输系统的效能,达到使人、车、路三者和谐发展。     

企业安全文化建设研究

安全文化是对安全理论的重要发展,安全文化建设是和谐社会建设的重要内容,是解决安全管理的重要措施.加强安全文化建设能增强安全意识,提高防灾能力,改善生产、生活环境.要有针对性、创造性和实效性地开展安全文化建设.     

Reaction kinetics of waste sulfuric acid using H2O2 catalytic oxidation

The process of recovering waste sulfuric acids using H₂O₂ catalytic oxidation is studied in this paper. Activated carbon was used as catalyst. Main operating parameters, such as temperature, feed rate of H₂O₂, and catalyst dosage, have effects on the removal of impurities from waste sulfuric acids. The reaction kinetics of H₂O₂ catalytic oxidation on impurities are discussed. At a temperature of 90°C, H₂O₂ feeding rate of 50 g (kg waste acid)^?1 per hour, and catalyst dosage of 0.2 wt% (waste acid weight), the removal efficiencies of COD and chrominance were both more than 99%, the recovery ratio of sulfuric acid was more than 95%, and the utilization ratio of H₂O₂ was 88.57%.

Implications: Waste sulfuric acid is a big environmental problem in China. The amount of waste sulfuric acid is huge every year. Many small and medium-sized businesses produced lots of waste acids, but they don’t have an appropriate method to treat and recover them. H₂O₂ catalytic oxidation has been used to treat and recover waste sulfuric acid and activated carbon is the catalyst here. Main parameters, such as temperature, feed rate of H₂O₂, and catalyst dosage, have been investigated. The reaction kinetics are discussed. This method can be economical and feasible for most small and medium-sized businesses.     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.