Falls from height during the floor slab formwork of buildings: Current situation in Spain

Problem

One of the phases with the highest risk of falls from a height in the construction of a building is during the floor slab formwork stage. This paper analyzes this particular risk, as well as the most frequently used fall-protection systems.

Method

A survey was carried out to define the current situation in Spain with regard to falls from a height during floor slab formwork and the fall-protection systems used to prevent such a risk.

Results

The results of the survey clarified the current situation in Spain with regard to this risk, and made it clear that there is considerable risk of falling from a height during the floor slab formwork stage.

Discussion

All the safety systems analyzed presented a series of weak points that should be studied in detail before they can be used on building sites.

Impact on industry

The risk of falling associated with floor slab formwork and the most frequently used protection systems are analyzed. As no research had been carried out to date on this type of risk, we consider the research presented in this article to be a pioneer in the field.     

[Case Study] CityCenter and Cosmopolitan Construction Projects, Las Vegas, Nevada: Lessons learned from the use of multiple sources and mixed methods in a safety needs assessment

Problem

The present study describes a response to eight tragic deaths over an eighteen month times span on a fast track construction project on the largest commercial development project in U.S. history.

Methods

Four versions of a survey were distributed to workers, foremen, superintendents, and senior management. In addition to standard Likert-scale safety climate scale items, an open-ended item was included at the end of the survey.

Results

Safety climate perceptions differed by job level. Specifically, management perceived a more positive safety climate as compared to workers. Content analysis of the open-ended item was used to identify important safety and health concerns which might have been overlooked with the qualitative portion of the survey.

Discussion

The surveys were conducted to understand workforce issues of concern with the aim of improving site safety conditions. Such efforts can require minimal investment of resources and time and result in critical feedback for developing interventions affecting organizational structure, management processes, and communication.

Summary

The most important lesson learned was that gauging differences in perception about site safety can provide critical feedback at all levels of a construction organization.

Impact on the Industry

Implementation of multi-level organizational perception surveys can identify major safety issues of concern. Feedback, if acted upon, can potentially result in fewer injuries and fatal events.     

An analysis of injury claims from low-seam coal mines

Introduction

The restricted workspace present in low-seam coal mines forces workers to adopt awkward working postures (kneeling and stooping), which place high physical demands on the knee and lower back.

Method

This article provides an analysis of injury claims for eight mining companies operating low-seam coal mines during calendar years 1996-2008. All cost data were normalized using data on the cost of medical care (MPI) as provided by the U.S. Bureau of Labor Statistics.

Results

Results of the analysis indicate that the knee was the body part that led in terms of claim cost ($4.2 million), followed by injuries to the lower back ($2.7 million). While the average cost per injury for these body parts was $13,100 and $14,400, respectively (close to the average cost of an injury overall), the high frequency of these injuries resulted in their pre-eminence in terms of cost. Analysis of data from individual mining companies suggest that knee and lower back injuries were a consistent problem across companies, as these injuries were each among the top five most costly part of body for seven out of eight companies studied.

Application/Impact

Results of this investigation suggest that efforts to reduce the frequency of knee and low back injuries in low-seam mines have the potential to create substantial cost savings.     

Pediatrician attitudes, knowledge, and practice behavior regarding teen driving safety

Problem

Each year about 4,000 teens ages 16-19 die on U.S. roads. Injury prevention counseling is recommended as a valuable and cost-effective part of routine health supervision. This study describes pediatrician knowledge and practice regarding teen driving safety.

Methods

A 31-item self-administered survey was mailed to pediatricians.

Results

160 of 392 pediatricians (41%) completed the survey. During a health supervision visit 93% of pediatricians reported discussing seat belt use, 89% impaired driving, 54% teen licensing laws, and 16% parent teen contract. Half reported having a teen in their practice killed in a crash.

Conclusions

A majority surveyed report discussing and counseling teens on first wave teen driver safety issues (seat belts, alcohol use), but most do not discuss graduated driver licensing laws or related issues. Impact on Industry: Broadly adopted, this inexpensive counseling approach, could lead to reductions in teen motorvehicle crash injuries.     

Fall arrest characteristics of a scissor lift

Problem

Census of Fatal Occupational Injuries (CFOI) data indicate 306 aerial lift fatalities between 1992-2003. Seventy-eight of these fatalities specifically involved scissor lifts. Members of standards committees have requested that NIOSH conduct research to determine the effects of safety-control practices related to using fall-protection systems for scissor lifts.

Method

This research examined the structural and dynamic stability of a scissor lift subjected to fall arrest forces. This was accomplished by conducting drop tests from a scissor lift. Anchorage locations evaluated included manufacturer-supplied anchorage points on the scissor lift platform as well as mid-rail and top-rail locations.

Results

Preliminary drop tests determined that a 2400 lb maximum arrest force (MAF) could be generated by dropping 169 lb through a fall height of 36” using Nystron® rope as a lanyard. The scissor lift maintained structural and dynamic stability for all drop tests when fully extended and on an incline.

Discussion

Anchoring a fall arrest system to either the mid-rail or top-rail is not a recommended practice by the scissor lift manufacturer. Anchor points are provided on the platform floor of the scissor lift for this purpose. However, our results demonstrate that the mid-rail and top-rail absorb substantial energy from an arrested fall and may have potential as appropriate anchorage points.

Impact to Industry

Employers and workers should consider implementing fall arrest systems when using scissor lifts as part of their overall risk mitigation plan for fall injury prevention.     

The conspicuity of first-responder safety garments

Introduction

This study compared the conspicuity of three types of first-responder safety garments (NFPA 1971-2007 turnout gear coats, and ANSI/ISEA 107 and 207 safety vests).

Method

Participants drove instrumented vehicles on a closed track during both daytime and nighttime, indicating when they could first detect pedestrians in a simulated emergency response scene. Pedestrians wore one of the safety garments and stood on either side of the emergency scene, facing or perpendicular to oncoming traffic, and either stationary or walking in place.

Results

All three garment standards provided equal levels of conspicuity, in that the distances at which the pedestrians were detected were equivalent. Time of day was a significant factor, with longer mean detection distances being observed in daytime. Pedestrian orientation was significant, with mean detection distances being longest when facing traffic. Pedestrian motion did not result in significant differences in detection distance.

Discussion

The results suggest that all three garment types studied are equivalent in making first responders conspicuous as pedestrians when working an emergency response scene in close proximity to traffic.

Impact on Industry

Whether an NFPA or ANSI/ISEA compliant is worn, first responders are equally likely to be detected by passing motorists, and as such these garments should be considered to be equivalent.     

A traffic safety evaluation of California's traffic violator school citation dismissal policy

Introduction

This study evaluated California's traffic violator school (TVS) citation dismissal policy.

Method

This study identified and compared two large samples of drivers either completing a TVS (N = 210,015) or convicted of a traffic citation (N = 168,563).

Results

Prior to adjudication, the TVS group had characteristics (e.g., lower prior conviction rate and smaller proportion of males) that were predictive of a lower subsequent crash risk. However, the TVS group exhibited significantly more crashes than did the convicted group in the subsequent one-year period. The difference (4.83%) increased to 10% after adjusting for the more favorable characteristics of the TVS group. The TVS group also had a higher adjusted subsequent crash rate at each prior driver record entry level, reflecting a loss in the general and specific deterrence of the non-conviction masked status of TVS dismissed citations. It was reported that the TVS dismissal policy results in approximately 12,300 additional crashes annually with economic costs of approximately $398,000,000.

Conclusions

The avoidance of licensing actions resulting from the dismissal policy assists in explaining why the driving public is exposed to an increased crash risk. A number of recommendations are offered to reduce the negative traffic safety impact of the TVS citation dismissal policy.     

The role of production and teamwork practices in construction safety: A cognitive model and an empirical case study

Problem

In construction, the challenge for researchers and practitioners is to develop work systems (production processes and teams) that can achieve high productivity and high safety at the same time. However, construction accident causation models ignore the role of work practices and teamwork. This study investigates the mechanisms by which production and teamwork practices affect the likelihood of accidents.

Method

The paper synthesizes a new model for construction safety based on the cognitive perspective (Fuller's Task-Demand-Capability Interface model, 2005) and then presents an exploratory case study. The case study investigates and compares the work practices of two residential framing crews: a 'High Reliability Crew' (HRC)—that is, a crew with exceptional productivity and safety over several years, and an average performing crew from the same company.

Results

The model explains how the production and teamwork practices generate the work situations that workers face (the task demands) and affect the workers ability to cope (capabilities). The case study indicates that the work practices of the HRC directly influence the task demands and match them with the applied capabilities. These practices were guided by the 'principle' of avoiding errors and rework and included work planning and preparation, work distribution, managing the production pressures, and quality and behavior monitoring.

Summary

The Task Demand-Capability model links construction research to a cognitive model of accident causation and provides a new way to conceptualize safety as an emergent property of the production practices and teamwork processes. The empirical evidence indicates that the crews' work practices and team processes strongly affect the task demands, the applied capabilities, and the match between demands and capabilities.

Impact on Industry

The proposed model and the exploratory case study will guide further discovery of work practices and teamwork processes that can increase both productivity and safety in construction operations. Such understanding will enable training of construction foremen and crews in these practices to systematically develop high reliability crews.     

Does the built environment affect when American teens become drivers? Evidence from the 2001 National Household Travel Survey

Problem

Motor vehicle crashes are the most common cause of death for American adolescents. However, the impact of where teens live on when they begin driving has not been studied.

Method

Data from the 2001 National Household Travel Survey were used to estimate the effect of residential density on the driver status of teens aged 16 to 19 years after matching on demographic characteristics.

Results

Controlling for demographic characteristics, 16 and 17 year old teens in high density neighborhoods had driver rates 15 percentage points below teens living in less dense areas (p < 0.001). The effect for 18 and 19 year olds was a 9 percentage point decrease (p < 0.001).

Summary

These results suggest teens living in less dense and more sprawling communities initiate driving at a younger age than comparable teens in compact areas, placing them at increased risk for crash related injuries. Impact on Industry: The role of environmental factors, such as neighborhood walkability and provision of transit, should be considered in young driver programs.