基于ASP.NET的安全信息管理系统

安全信息管理系统主要包括对安全信息数据的收集、存储、加工处理、传递和利用等功能.本文主要阐述了B/S结构的特点,以及一种全新的Web开发技术ASP.NET在安全信息管理系统中的应用.这使在Web上对安全信息数据进行增、删、改、查操作成为可能,对防止事故发生,减少由事故造成的损失,提高企业的安全管理水平等具有重要的现实意义.     

水产品中甲氰菊酯残留的ELISA快速检测

为快速检测水产品中甲氰菊酯的残留,应用水溶性碳化二亚胺(EDC)法将甲氰菊酸与牛血清白蛋白(BSA)和卵清蛋白(OVA)偶联,合成了甲氰菊酯的人工免疫抗原和包被抗原.免疫抗原经紫外扫描和聚丙烯酰胺电泳验证构建成功,用此抗原免疫试验兔子,获得了甲氰菊酯的多克隆抗体.经检测,抗体对甲氰菊酯具有较好的特异性和灵敏性.在此基础上建立了水产品中甲氰菊酯残留的间接ELISA检测法.理想的甲氰菊酯-OVA包被抗原质量浓度为1.6 mg/L,酶标二抗(羊抗兔IgG-HRP)的稀释度为1∶1000,多抗的稀释度为1∶3 200,最适检测范围为20～200 μg/kg,在实际样品检测时的最低检出限为20 μg/kg,接近或达到气相色谱法的测定水平,但检测速度大大提高,可在3 h内完成近百个样品的分析,适合甲氰菊酯的快速检测.     

土壤中多环芳烃的SPMD辅助解吸行为研究

为了开发一种表征土壤中憎水性有机污染物解吸及生物有效性的新方法,建立了半透膜被动采样装置（SPMD）研究土壤中有机污染物解吸行为的方法,利用SPMD分析了多环芳烃菲、芘和苯并［a］芘在3种不同性质土壤中的辅助解吸行为.结果表明,SPMD是一种很好地表征土壤中憎水性有机污染物解吸及生物有效性的手段. SPMD辅助解吸多环芳烃的效率与土壤有机质及多环芳烃性质有关.随着土壤有机质含量的降低,土壤中菲和芘的SPMD解吸率逐渐升高,对于10 mg/kg染毒水平,当土壤有机质含量由18.68%降低到0.3%时,2种化合物的解吸率分别由56.45%和48.28%上升到接近100%;但是对于苯并［a］芘,粘土表现出明显的滞留能力,在有机质含量（0.3%）很低、粘土含量（39.05%）较高的3号土壤中,苯并［a］芘的解吸率仅有66.97%.不同多环芳烃SPMD辅助解吸率差别很大,随着土壤有机质含量的降低,以及污染物浓度的提高,菲和芘的解吸差异逐渐缩小,而苯并［a］芘与上述2种多环芳烃的差异很大,主要是由于苯并［a］芘具有高度亲脂性,并且分子较大,造成其容易滞留在粘土的微孔及有机质的致密结构中.     

辽河口湿地沉积物硝化细菌及硝化作用研究

2009年6月和8月,采用现场培养和实验室模拟培养相结合的方法对辽河口湿地表层沉积物硝化细菌数量、硝化速率及影响因素进行了研究.结果表明,辽河口湿地表层沉积物氨氧化细菌(ammonia-oxidizing bacteria,AOB)数量6月在0.54×104～5.69×104个.g-1之间,平均值为(2.21±2.32)×104个.g-1,8月在1.90×104～7.90×104个.g-1之间,平均值为(3.61±2.87)×104个.g-1;沉积物潜在硝化速率6月在9.72～16.45 mmol.(m2.h)-1之间,平均值为(12.54±3.14)mmol.(m2.h)-1,8月在14.66～24.62 mmol.(m2.h)-1之间,平均值为(18.71±4.21)mmol.(m2.h)-1;净硝化作用速率6月(S1站)为0.41 mmol.(m2.h)-1,8月在0.20～0.53 mmol.(m2.h)-1之间,平均值为(0.35±0.16)mmol.(m2.h)-1.潜在硝化速率显著高于净硝化速率,AOB数量、净硝化作用速率和潜在硝化作用速率均表现为8月高于6月,芦苇根际效应对硝化作用有促进作用.通过SPSS 13.0软件统计分析,表明影响辽河口湿地表层沉积物硝化作用的主要环境因子有上覆水NH 4+-N浓度和沉积物pH、有机质、总氮(TN)、总磷(TP)、NH 4+-N含量以及AOB数量(p0.05),其中上覆水NH 4+-N浓度和沉积物总磷(TP)、NH 4+-N含量对硝化作用影响较大,是辽河口湿地硝化作用影响的关键因素.根据研究结果估算辽河口湿地沉积物硝化作用每天可以将1.14×105kg的NH 4+-N转化为NO 3--N,对河口湿地氮的循环具有重要意义.     

连续流膜生物反应器中好氧颗粒污泥的形成及机制探讨

为了探讨好氧颗粒污泥在连续流膜生物反应器(MBR)中的形成过程和机制,采用连续流试验的方法,研究了好氧颗粒污泥形成过程中膜反应器内污染物的去除效果和好氧颗粒污泥特性的变化,并对连续流MBR中好氧颗粒污泥的形成机制进行了探讨.结果显示,连续流MBR中好氧颗粒污泥的形成增强了MBR的运行稳定性和抗冲击能力.废水中微生物抑制...     

Kinetics of enzymatic unhairing by protease in leather industry

In leather industry, unhairing is a heavy pollution operation. The conventional lime-sulfide process produces a large amount of sulfide which is toxic to health and difficult to dispose. Moreover, conventional lime-sulfide process leads to the destruction of the hair causing increased COD, BOD and TDS loads in the effluent. As an alternative method, enzymatic unhairing is a promising clean technology. The main utilized enzyme preparations are proteases.There are many reports about enzymatic unhairing, most of which are qualitative. The kinetics of enzymatic unhairing by protease was discussed in this article. It will provide useful information to enzymatic unhairing. In our research, by analysis of the concentrations of released total protein in enzyme bath during protease unhairing, the good linearity between released total protein and square root of time (min^1/2) was obtained at the initial stage. The good linearity suggests that enzymatic unhairing by protease is a diffusion-controlled process at the initial stage. The analysis of kinetics of released saccharides also confirms the same conclusion. On the other hand, the same characteristics between the kinetics of released saccharides and that of released total protein further confirms that it is the hydrolysis of core protein by protease that leads to the degradation of proteoglycans and the release of protein and saccharides. However, in our tests, the kinetics of released collagen indicates that the injury to skin took place in 3-6 h. Therefore, it’s necessary to control the time of protease unhairing within an appropriate limit.     

Mobilities and leachabilities of heavy metals in sludge with humus soil

Chemical forms of Zn, Ni, Cu, and Pb in municipal sewage sludge were investigated by adding humus soil to sludge and by performing sequential extraction procedures. In the final sludge mixtures, Zn and Ni were mainly found in Fe/Mn oxide-bound (F3) and organic matter/sulfide-bound (F4) forms. For Zn, exchangeable (F1), carbonate-bound (F2), and F3 forms were transformed to F4 and residual forms (F5). For Ni, F1 and F2 forms were transformed to F1, F2, and F3 forms. Both Cu and Pb were strongly associated with the stable forms F4 and F5. For Cu, F2 and F3 forms were major contributors, while for Pb, F3 and F4 forms were major contributors to F5. Humus soil dosage and pH conditions in the sludge were strongly correlated with the forms of heavy metals. Five forms were used to evaluate metal mobilities in the initial and final sludge mixtures. The mobilities of the four heavy metals studied decreased after 28 days. The metal mobilities in the final sludge mixtures were ranked in the following order: Ni > Zn > Cu = Pb. Leaching tests showed that the mobilities of Zn and Ni in lower pH conditions (pH 4) were higher than those in higher pH conditions (pH 8).     

一株产生物表面活性剂菌株的筛选

从被长期受石油污染的特定环境中取样,经富集培养和平板法筛选得到9株乳化性能较好的菌株.采用排油圈法对这9株菌进行表成活性测定,其中菌株SF-6表面活性最强,通过形态观察和部分生理生化试验初步鉴定该菌株为铜绿假单胞菌(Pseudomonas Aeruginosa),其所产生物表面活性物质初步鉴定为鼠李糖脂.     

福建省能源消费碳排放和低碳能源发展研究

能源消费导致的碳排放对全球气候变化带来严峻挑战.区域经济迅速发展,不但对区域能源安全提出挑战,也对碳减排提出新的课题.文章总结了改革开放以来福建省能源消费的特点和趋势,计算由能源消费引起的碳排放量.研究表明,虽然碳强度有显著下降,但是碳排放总量增长比较明显,特别是从2000年开始,增长幅度加大.利用Kaya恒等式对碳排...     

基于生态系统的水环境压力分区指标体系构建

为了科学合理的完成水环境压力分区,构建水环境压力分区指标体系是其关键和基础.鉴于水环境压力涉及因素的系统性.相互联系性,从生态系统的角度考虑选取水环境压力分区指标十分必要;由于水环境压力涉及方面的相互联系性,其表征指标之间往往存在信息量的重叠,为了避免信息的重复表达,减少不必要的工作量,同时避免冗余指标带来的干扰,需对...