Mining and corruption

This study examines the links between mineral dependency and corruption. Specifically, it develops a cross-section econometric model that estimates the effects of per capita income, fuel exports, non-fuel exports, and average per unit value of mineral exports on corruption.     

提高转炉二次除尘效率的难题及对策

以某炼钢厂2×100 t转炉二次除尘系统为例,对其在长期的除尘实践中反映出来的问题进行了分析,并结合实际提出了解决对策,经实施并优化后取得了良好的效果.     

配电线路补偿的安全性探讨

文章通过对我国地区10kV及以下配电线路无功补偿的现状,并结合有关数据,对配电线路无功补偿的必要性、补偿位置选择进行了分析。提出提高中、低压配电网功率因数,能够稳定提高线路电路输送能力和供电质量,并且能够大大降低线路损耗,既具有明显的社会和经济效益,也具有现实意义。     

企业重大事故引发环境事件现状分析和应急工作建议

随着经济的稳定和飞速发展，我国的生产类型和能源模式没有根本改变，环境污染问题越发严重，突发环境事件的数量急剧增长，影响范围和危害程度都在加大，如何保障环境安全已经成为全社会的一个重要问题。本文从我国突发环境事件发生规律及特点入手，分析了我国在环境事件应急和环境安全管理现状和存在问题，提出了突发环境事件应急工作的要点和工作建议。     

Characteristic overpressure–impulse–distance curves for the detonation of explosives, pyrotechnics or unstable substances

A number of models have been proposed to calculate overpressure and impulse from accidental industrial explosions. When the blast is produced by explosives, pyrotechnics or unstable substances, the TNT equivalent model is widely used. From the curves given by this model, data are fitted to obtain equations showing the relationship between overpressure, impulse and distance. These equations, referred to here as characteristic curves, can be fitted by means of power equations, which depend on the TNT equivalent mass. Characteristic curves allow determination of overpressure and impulse at each distance.     

湘江流域洪水灾害综合风险评价

依据灾害系统理论,在综合考虑致灾因子、孕灾环境和承灾体的基础上,从致灾因子、孕灾环境的自然属性和承灾体的社会属性两方面出发,以县级行政单元为基本评价单元,进行了湘江流域洪水灾害的综合风险评价。在综合考虑降雨量、地形以及历史上洪水灾害发生频次等自然因素的条件下,利用地图代数分析得到了湘江流域洪水灾害危险性评价图;在综合考虑人口密度、耕地面积百分比、人均GDP和单位面积水库和塘坝容量等社会经济指标的基础上,利用模糊综合评判法得到了湘江流域洪水灾害脆弱性评价图。在此基础上采取“乘”模型的计算公式,即风险=危险性×脆弱性,将湘江流域洪水灾害风险划分为高风险、较高风险、中等风险、较低风险和低风险5个等级,并借助地理信息系统软件编制了湘江流域洪水灾害综合风险等级评价图。     

Sequential extraction of 226Ra in sediments from an estuary affected historically by anthropogenic inputs of natural radionuclides

Riverbed sediments from an estuary historically affected by wastes discharged by several phosphate fertiliser plants and enriched in uranium-series radionuclides were operationally speciated using a Tessier-based method. In each selective fraction the (226)Ra content was determined by alpha-particle spectrometry after radiochemical isolation and electrodeposition onto stainless steel planchets. These studies were performed in (226)Ra-polluted estuarine sediments collected one year after anthropogenic discharges had ceased in order to obtain useful information about the operational forms in which this radionuclide remains associated with the sediments at this time. The results obtained revealed that one year after (226)Ra inputs had stopped, the radionuclide was associated mostly with the more refractory forms. Consequently, it is possible to foresee little potential remobilisation of (226)Ra contamination from sediments to the aqueous phase in the future under normal environmental conditions.     

印染废水脱色技术与理论述评

文章介绍了印染废水典型脱色技术的现状和进展,并着重分析了各种脱色技术的脱色机制,突出了典型脱色技术中的理论因素,介绍并阐明了一些脱色理论新观点,如吸附剂改性增效原理、分子结构与絮凝效果的联系、小剂量氧化剂偶合絮凝、脱色菌的质粒对脱色率的影响等,并从工艺角度分析了各种脱色方法的应用.     

采用絮状锰悬浊液催化剂空气氧化处理含硫废水

探讨了一种快速降解含硫废水中硫化物的新方法。用可溶性二价锰盐在pH为10．5－12．0时曝气,制得絮状锰悬浊液催化剂。使用该催化剂可将废水中S^2-的氧化反应速率大为提高,反应时间大为缩短,S^2-去除率几近100％;同时还可大大降低废水的COD,因此可大大降低生化处理系统的负荷。处理S^2-质量浓度为50－2000mg/L含硫废水的最佳工艺条件：絮状锰悬浊液催化剂与废水的体积比为0．8－1．0,pH为10－12,曝气量为50L/h左右,反应温度为15－45℃。絮状锰悬浊液催化剂可循环使用。     

催化臭氧化降解磺基水杨酸的机理

通过对不同工艺参数的考察及催化剂活性组分变化的分析,探讨了VO₂/硅胶催化臭氧化降解磺基水杨酸的机理.结果表明,催化体系的本质是催化剂中的四价钒催化臭氧分解生成了活性更高的羟基自由基,所生成的五价钒对体系化学耗氧量(COD)的去除也有很大的贡献(近10%).循环使用试验表明,20min时,VO₂/硅胶催化剂在第1次和第10次的COD去除率分别为76%和70%,显示了较好的应用前景.