Use of Maize (<Emphasis Type="Italic">Zea mays</Emphasis> L.) for phytomanagement of Cd-contaminated soils: a critical review

Maize (Zea mays L.) has been widely adopted for phytomanagement of cadmium (Cd)-contaminated soils due to its high biomass production and Cd accumulation capacity. This paper reviewed the toxic effects of Cd and its management by maize plants. Maize could tolerate a certain level of Cd in soil while higher Cd stress can decrease seed germination, mineral nutrition, photosynthesis and growth/yields. Toxicity response of maize to Cd varies with cultivar/varieties, growth medium and stress duration/extent. Exogenous application of organic and inorganic amendments has been used for enhancing Cd tolerance of maize. The selection of Cd-tolerant maize cultivar, crop rotation, soil type, and exogenous application of microbes is a representative agronomic practice to enhance Cd tolerance in maize. Proper selection of cultivar and agronomic practices combined with amendments might be successful for the remediation of Cd-contaminated soils with maize. However, there might be the risk of food chain contamination by maize grains obtained from the Cd-contaminated soils. Thus, maize cultivation could be an option for the management of low- and medium-grade Cd-contaminated soils if grain yield is required. On the other hand, maize can be grown on Cd-polluted soils only if biomass is required for energy production purposes. Long-term field trials are required, including risks and benefit analysis for various management strategies aiming Cd phytomanagement with maize.     

Determining soil quality in urban agricultural regions by soil enzyme-based index

Urban agricultural soils are highly variable, and careful selection of sensitive indicators is needed for the assessment of soil quality. This study is proposed to develop an index based on soil enzyme activities for assessing the quality of urban agricultural soils. Top soils were collected from urban agricultural areas of Korea, and soil chemical properties, texture, microbial fatty acids, and enzyme activities were determined. The soils belonged to five textural classes with the highest frequency of sandy loam. There was no clear correlation between the soil chemical properties and soil microbial properties. Principal component analysis (PCA) and factor analysis were applied to microbial groups for identification of microbial community variation in soils. Two soil groups, namely group 1 (G1) and group 2 (G2), based on microbial community abundance were examined by PCA, and those were more prominent in factor analysis. The G1 soils showed higher microbial community abundance than G2 soils. The canonical discriminant analysis was applied to the enzyme activities of sandy loam soil to develop an index, and the index validation was confirmed using the unused soils and published data. The high-quality soils in published literature assigned the high valued index. Microbial fatty acids and soil enzyme activities can be suitable indicators for soil quality evaluation of urban agricultural soils.

     

Assessment of Wastewater Reuse Effects on Nutrient Loads from Paddy Field Using Field-Scale Water Quality Model

CREAMS-PADDY, a modified version of the field-scale CREAMS model, simulates the hydrologic, sediment, and nutrient cycles in paddy fields. The CREAMS-PADDY model was applied to estimate the effects of using wastewater for irrigation on nutrient loads from paddy fields in Republic of Korea. The model was calibrated and validated using data from two rice paddy fields. The coefficient of determination between observed and simulated total nitrogen and total phosphorus were 0.92 and 0.57, respectively, for the calibration period and 0.84 and 0.73 for the validation period. Simulations showed that when using wastewater for irrigation, the total nitrogen loads increased by 210% and total phosphorus by 1,270% when compared with conventional water irrigation. The total nitrogen and total phosphorus concentration in the ponded water increased by 254 and 534%, respectively, when compared with conventional water irrigation. The effect of reducing N and P fertilizer application rates by 10, 30, and 50% on nutrient loads exiting a paddy field were also simulated using the validated CREAMS-PADDY model. These simulations indicated that total phosphorus loads from the paddy were reduced only slightly by reducing the fertilizer, while total nitrogen loads were reduced by as much as 8.8, 16.6, and 24.4% when N ferlitizer rates were reduced by 10, 30, and 50%, respectively. An erratum to this article can be found at     

MODELING DEVELOPED COASTAL WATERSHEDS WITH THE AGRICULTURAL NON-POINT SOURCE MODEL1

ABSTRACT: Many coastal states are facing increasing urban growth along their coast lines. The growth has caused urban non-point source nitrogen runoff to be a major contributor to coastal and estuarine enrichment. Water resource managers are responsible for evaluating the impacts from point and non-point sources in developed watersheds and developing strategies to manage future growth. Non-point source models provide an effective approach to these management challenges. The Agricultural Non-Point Source Model (AGNPS) permits the incorporation of important spatial information (soils, landuse, topography, hydrology) in simulating surface hydrology and nitrogen non-point source runoff. The AGNPS model was adapted for developed coastal watersheds by deriving urban coefficients that reflect urban landuse classes and the amount of impervious surface area. Popperdam Creek watershed was used for model parameter development and model calibration. Four additional watersheds were simulated to validate the model. The model predictions of the peak flow and total nitrogen concentrations were close to the field measurements for the five sub-basins simulated. Measured peak flow varied by 30 fold among the sub-basins. The average simulated peak flow was within 14 percent of the average measured peak flow. Measured total nitrogen loads varied over an order of magnitude among the sub-basins yet error between the measured and simulated loads for a given sub-basin averaged 5 percent. The AGNPS model provided better estimates of nitrogen loads than widely used regression methods. The spatial distribution of important watershed characteristics influenced the impacts of urban landuse and projecting future residential expansion on runoff, sediment and nitrogen yields. The AGNPS model provides a useful tool to incorporate these characteristics, evaluate their importance, and evaluate fieldscale to watershed-scale urban impacts.     

Modeling of road traffic noise and estimated human exposure in Fulton County, Georgia, USA

Environmental noise is a major source of public complaints. Noise in the community causes physical and socio-economic effects and has been shown to be related to adverse health impacts. Noise, however, has not been actively researched in the United States compared with the European Union countries in recent years. In this research, we aimed at modeling road traffic noise and analyzing human exposure in Fulton County, Georgia, United States. We modeled road traffic noise levels using the United States Department of Transportation Federal Highway Administration Traffic Noise Model implemented in SoundPLAN?. After analyzing noise levels with raster, vector and fa?ade maps, we estimated human exposure to high noise levels. Accurate digital elevation models and building heights were derived from Light Detection And Ranging survey datasets and building footprint boundaries. Traffic datasets were collected from the Georgia Department of Transportation and the Atlanta Regional Commission. Noise level simulation was performed with 62 computers in a distributed computing environment. Finally, the noise-exposed population was calculated using geographic information system techniques. Results show that 48% of the total county population [N=870,166 residents] is potentially exposed to 55 dB(A) or higher noise levels during daytime. About 9% of the population is potentially exposed to 67 dB(A) or higher noises. At nighttime, 32% of the population is expected to be exposed to noise levels higher than 50 dB(A). This research shows that large-scale traffic noise estimation is possible with the help of various organizations. We believe that this research is a significant stepping stone for analyzing community health associated with noise exposures in the United States.     

Distribution of perfluorochemicals between sera and milk from the same mothers and implications for prenatal and postnatal exposures

The levels of six perfluorocarboxylates (PFCAs), four perfloroalkylsulfonates (PFASs), and one sulfonamide were measured in paired samples of maternal serum, umbilical cord serum, and breast milk. The maternal and cord sera were strongly correlated with each other for all measured compounds (r > 0.5 and p < 0.01). Nevertheless, there was a significant difference in compound composition profile between the two sera matrices, with a more depletion of the longer chain compounds in cord serum. The transfer efficiency values from maternal to cord serum (TF_CS/MS) decreased by 70% with each increasing unit of -CF₂ chain within a PFCA group, and for perfluorooctanesulfonate (PFOS), by a half compared to perfluorooctanoate (PFOA). In contrast to the strong correlation in concentrations between the two sera matrices, the pattern of compounds in breast milk differed considerably with those in sera. Accordingly, compound- and matrix-specific transfer must be considered when assessing prenatal and postnatal exposure.     

Highly siliceous MCM-48 from rice husk ash for CO2 adsorption

Mesoporous MCM-48 silica was synthesized using a cationic-neutral surfactant mixture as the structure-directing template and rice husk ash (RHA) as the silica source. The MCM-48 samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), N₂ physisorption and SEM. X-ray diffraction pattern of the resulting MCM-48 revealed typical pattern of cubic Ia3d mesophase. BET results showed the MCM-48 to have a surface area of 1024 m²/g and FT-IR revealed a silanol functional group at about 3460 cm⁻¹. Breakthrough experiments in the presence of MCM-48 were also carried out to test the material's CO₂ adsorption capacity. The breakthrough time for CO₂ was found to decrease as the temperature increased from 298 K to 348 K. The steep slopes observed shows the CO₂ adsorption occurred very quickly, with only a minimal mass transfer effect and very fast kinetics. In addition, amine grafted MCM-48, APTS-MCM-48 (RHA), was prepared with the 3-aminopropyltriethoxysilane (APTS) to investigate the effect of amine functional group in CO₂ separation. An order of magnitude higher CO₂ adsorption capacity was obtained in the presence of APTS-MCM-48 (RHA) compared to that with MCM-48 (RHA). These results suggest that MCM-48 synthesized from rice husk ash could be usefully applied for CO₂ removal.     

South Korean managerial reactions to voicing discontent: The effects of employee attitude and employee communication styles

Using a scenario‐based experiment, this study examined how employee attitude and employee communication styles affected managers' reactions to employees' objections to a company policy. In the experiment, employee attitude (cynical versus trusting) and employee communication styles (aggressive versus diplomatic) were manipulated, and managers' reactions to voicing discontent were assessed through a questionnaire. Based on a sample of 185 middle managers working in various organizations in South Korea, the results showed that managers were more likely to engage in social undermining and were less likely to provide social support when cynical (rather than trusting) employees objected to a company policy. Also, attributed motives (i.e., personal attack and health concern) fully mediated the relationship between employee attitude and social support and social undermining. In addition, managers more likely attributed the objection to moral concerns when trusting (rather than cynical) employees communicated in an aggressive manner. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemical characteristics of long-range transport aerosol at background sites in Korea

In this study, background concentration sites of Deokjeok and Gosan, which were deemed suitable for monitoring the impact of long-range transported air pollutants, were selected. An investigation of the source types of pollutants, their locations, and relative quantitative contributions to the particulate concentrations at both sites using appropriate methodologies to make initial estimations was conducted. Episodic measurements of PM_2.5, PM₁₀, and size distribution, along with its ion and carbon components were performed from 2005 to 2007, and a comprehensive analysis of the results was conducted utilizing back trajectory analysis. As for frequency of wind direction, it was quite apparent that the two sites are heavily influenced by air masses originating from the eastern and northern regions of China. For PM_2.5 and PM₁₀, the mass concentrations from north and east China were higher than other cases, originating from the ocean. In the northerly-wind case, meteorological properties for Deokjeok and Gosan and the influence of carbon emissions from northwest Korea resulted in a changing of air mass properties during transport. As was the case with mass concentration, the highest contribution for ionic and carbon components of PM_2.5 and PM₁₀ for both sites appeared for the westerly wind case. A specially high relative contribution, greater than 1.4 times, was apparent in the secondary aerosol case because of a large influence of long-range transported pollutants from east China. Carbon components exhibited different behaviors for the northerly and westerly wind cases compared with secondary aerosol. The major reason for this discrepancy appears to be the carbon emissions from northwest Korea.