Genotoxicity assessment of acute exposure of chlorpyrifos to freshwater fish Channa punctatus (Bloch) using micronucleus assay and alkaline single-cell gel electrophoresis

Chlorpyrifos (O,O-diethyl O-3,5,6-trichloro-2-pyridylphosphorothioate) is one of the organophosphate pesticides widely used in agricultural practices throughout world and irreversible inhibitor of cholinesterase in all animal species. Limited efforts have been made to study acute genotoxic effects of chlorpyrifos (CPF) in different tissues of fish using genotoxic biomarkers. Therefore, the present investigation was aimed to study the induction of DNA damage by CPF in freshwater teleost fish Channapunctatus using micronucleus assay (MN assay) and alkaline single-cell gel electrophoresis (comet assay). The value of LC(50) - 96 h of CPF was determined as 811.98 microgl(-1) for C. punctatus, in a semi-static system and on the basis of LC(50) value three acute concentrations viz., 203, 406 and 609 microgl(-1) were determined. The fishes were exposed to the different concentrations of CPF for 96 h and samplings were done at regular intervals for assessment of the MN frequencies and DNA damage. In general, significant effects (P<0.01) from both concentrations and time of exposure were observed in exposed fishes. It was found that the micronucleus induction was highest on 96 h at all concentrations in the peripheral blood. Similar trend was observed for the DNA damage measured in terms of the percentage of tail DNA in the lymphocyte and gill cells. This study explored the combined use of micronucleus assay and comet assay for in vivo laboratory studies using fresh water fish for screening the genotoxic potential of xenobiotics.     

Combustion characteristics of Malaysian municipal solid waste and predictions of air flow in a rotary kiln incinerator

Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable for treating MSW.     

The Role of Wind in Modeling of Oil Pollution Transport and Diffusion in the Persian Gulf

The Persian Gulf ecosystem is facing a variety of stresses as a result of being located within the richest oil province in the world, which hosts more than 67 % of the world oil reserve. In this paper, the distribution of oil pollution on the surface layer of the Persian Gulf is predicted for the different months after the release, based on the Coupled Hydrodynamical Ecological model for Regional Shelf seas (COHERENS). An Eulerian model for the Persian Gulf is set up using the Cartesian coordinate in the horizontal direction, and the sigma coordinate in the vertical direction. Based on this model, our analysis and simulation results indicate that the winds lead to diffusion of the contaminant concentration in the direction of the Arabian coast from the initial position of the spill. The results of this study can be used to provide appropriate solutions for preventing oil from spreading further in the region.     

Assessment of tap water quality and corrosion scales from the selected distribution systems in northern Pakistan

Corrosion deposits formed within drinking water distribution systems deteriorate drinking water quality and resultantly cause public health consequences. In the present study, an attempt was made to investigate the concurrent conditions of corrosion scales and the drinking water quality in selected water supply schemes (WSS) in districts Chitral, Peshawar, and Abbottabad, northern Pakistan. Characterization analyses of the corrosion by-products revealed the presence of α-FeOOH, γ-FeOOH, Fe₃O₄, and SiO₂ as major constituents with different proportions. The constituents of all the representative XRD peaks of Peshawar WSS were found insignificant as compared to other WSS, and the reason could be the variation of source water quality. Well-crystallized particles in SEM images indicated the formation of dense oxide layer on corrosion by-products. A wider asymmetric vibration peak of SiO₂ appeared only in Chitral and Abbottabad WSS, which demonstrated higher siltation in the water source. One-way ANOVA analysis showed significant variations in pH, turbidity, TDS, K, Mg, PO₄, Cl, and SO₄ values, which revealed that these parameters differently contributed to the source water quality. Findings from this study suggested the implementation of proper corrosion prevention measures and the establishment of international collaboration for best corrosion practices, expertise, and developing standards.     

Assessment of trace metal concentrations in muscle tissue of certain commercially available fish species from Kayseri,Turkey

Regular consumption of fish has been widely recommended by health authorities. However, it is known that some species accumulate high levels of contaminants including heavy metals (e.g., Hg, Cd, Pb, and As). In this study, Cu, Pb, Co, Ni, Cr, Mn, Cd, and Fe were determined in the muscle tissue of 11 commercially available fish species (Sparus auratus, Dicentrarchus labrax, Mullus barbatus, Belone belone, Psetta maxima, Epinephelus aeneus, Salmothymus, Soleidae, Pomatomus saltatrix, Engraulis encrasicolus, and Sarda sarda) supplied from retailers in Kayseri, Turkey. Determinations were carried out by flame atomic absorption spectrometry after the wet digestion method. The average metal concentrations of the 11 species were determined in the range of 0.54–1.79, 0.82–1.40, 2.38–4.54, 1.23–3.67, 5.01–5.97, 0.77–3.59, 0.48–1.06, and 5.05–122.8 μg/g wet weight for Cu, Pb, Co, Ni, Cr, Mn, Cd, and Fe, respectively. The permissible tolerable daily intake (PTDI) and calculated daily intake (CDI) values were compared, and the calculated daily intake values of the samples were found to be below the established values. Correlations between the metal contents in samples were investigated by performing correlation tests with SPSS 13.0 for windows.     

Monitoring of cotton dust and health risk assessment in small-scale weaving industry

The present study describes the estimation of particulate matter (cotton dust) with different sizes, i.e., PM(1.0), PM(2.5), PM(4.0), and PM(10.0 μm) in small-scale weaving industry (power looms) situated in district Hafizabad, Punjab, Pakistan, and the assessment of health problems of workers associated with these pollutants. A significant difference was found in PM(1.0), PM(2.5), PM(4.0), and PM(10.0) with reference to nine different sampling stations with p values <0.05. Multiple comparisons of particulate matter with respect to size, i.e. PM(1.0), PM(2.5), PM(4.0), and PM(10.0), depict that PM(1.0) differs significantly from PM(2.5), PM(4.0), and PM(10.0), with p values <0.05 and that PM(2.5) differs significantly from PM(1.0) and PM(10.0), with p values <0.05, whereas PM(2.5) differs non-significantly from PM(4.0), with a p value >0.05 in defined sampling stations on an average basis. Majority of the workers were facing several diseases due to interaction with particulate matter (cotton dust) during working hours. Flue, cough, eye, and skin infections were the most common diseases among workers caused by particulate matter (cotton dust).     

Effects of pesticides used in agriculture on the development of precocious puberty

The present study aims to evaluate the effects of pesticides on premature breast development. Forty-five girls (group 1) with premature breast development living in the Menderes region, where greenhouse cultivation is the main income, 16 girls (group 2) living in Izmir city with early puberty, and 33 girls (group 3) who had no signs of puberty were included in the study. Endosulphan 1, endosulphan 2, endosulphan sulphate, methoxychlor, vinclozolin, 4,4-dichlorodiphenyldichlorethylene (DDE), 4,-dichlorodiphenyltrichloroethane (DDT), and 2,4-DDT were evaluated in the serum and adipose tissues of the groups by using a gas chromatography-mass spectrometry method. With the exception of 4,4'-DDE, the pesticides studied were undetectable in the serum and adipose tissue samples. The levels of basal luteinizing hormone (LH), stimulated LH, follicle-stimulating hormone, and the long axis of the uterus and both ovaries were significantly different in the girls who had premature thelarche and detectable 4,4'-DDE levels compared to the girls who had premature thelarche and undetectable 4,4'-DDE levels in serum and adipose tissues. The presence and levels of pesticides in serum and adipose tissues were not related to precocious puberty (PP). The mechanisms that lead to PP may also result in obesity, and obesity may be the underlying cause for PP in this group.     

Numerical Modeling of a Potential Geological CO 2 Sequestration Site at Minden (Germany)

We study opportunities for CO₂ sequestration in geological formations of the state North Rhine Westphalia in Germany. Simulations are performed for evaluating a potential site within the Bunter sandstone formation near the town of Minden in a depth?of around 3,000 m using the numerical simulator TOUGHREACT. Our focus is on three CO₂ storage mechanisms: (1) hydrodynamic trapping, (2) dissolution trapping, and (3) mineral trapping. The results show that due to buoyancy the injected CO₂ phase initially migrates towards the top of the reservoir and is hydrodynamically trapped beneath the confining layer of the cap rock. Then, the CO₂ spreads laterally and dissolves partially in the formation water. The dissolution of CO₂ results in an increase of the density of the brine causing a downward migration until it settles after 10,000 years at the bottom of the reservoir. The simulations indicate that after 10,000 years, 15% (17 Mt) from a total of 114 Mt injected CO₂ are trapped hydrodynamically, 20% (23 Mt) are trapped by dissolution, and 65% (74 Mt) are fixed in newly formed carbonates such as dawsonite, ankerite, and siderite. Within our study pressure increases near the injection well by a factor of 1.1 which is lower than the upper limit usually accepted in gas storage operations. The mineral reactions cause a net decrease of porosity and in turn a decrease of permeability down to 9% of the initial value in parts of the reservoir.     

Development of Dissolved Oxygen Model for a Highly Variable Flow River: A Case Study of Ravi River in Pakistan

A framework for dissolved oxygen (DO) modeling of the Ravi River has been developed based on a combination of laboratory measurements and field and monitoring data. Both the classical Streeter-Phelps (CSP) and the modified Streeter-Phelps (MSP) models are used for DO simulations. The MSP model considers the carbonaceous biochemical oxygen demand (CBOD) and nitrogenous biochemical oxygen demand (NBOD) separately, whereas the CSP model is evaluated considering only the CBOD and NBOD is incorporated in the overall BOD utilization rate. CBOD, NBOD and BOD rates have been determined through long-term BOD analysis of five main wastewater outfalls and two surface drains discharging into the Ravi River over a 98 km stretch. Analysis by Thomas Method manifests strong coefficient of determination “R²” between 0.72 and 0.98 for all the three types of BOD rates. Sensitivity analyses have also been carried out to find out a suitable reaeration rate formula for highly variable flows in the Ravi River. The CSP model results based on classical approach of considering only CBOD show significant difference between the model predictions and field measurements suggesting that NBOD needs to be incorporated for the model development. The dissolved oxygen values calculated using the MSP model and the CSP model based on overall BOD rate are in close agreement with field measurements and are thus suitable to model DO levels in the Ravi River.