楔横轧模具的铣削加工及其机床设计

根据楔横轧模具孔型及其加工成形的特点,对楔横轧模具大面积大螺距楔形提出了一种简单高效的铣削加工方法,并设计制造了楔横轧轧辊模具孔型加工专用机床——SDM机床。新设计的SDM机床投资小,可以加工直径为φ620 mm～φ1000mm的轧辊模具,加工导程最大可达469 mm,加工周期短,成本低,且大大降低了工人劳动强度。     

多管旋风除尘器热态除尘效率的影响因素

根据对多管旋风除法器热态除尘效率大量测试实践，讨论了影响多管风除尘器除尘效率的制造质量，整体安装要求、运行管理及锅炉运行等因素，建议在应用推广中应予以重视。     

Risk assessment of Giardia from a full scale MBR sewage treatment plant caused by membrane integrity failure

Membrane bioreactors (MBR) are highly efficient at intercepting particles and microbes and have become an important technology for wastewater reclamation. However, many pathogens can accumulate in activated sludge due to the long residence time usually adopted in MBR, and thus may pose health risks when membrane integrity problems occur. This study presents data from a survey on the occurrence of water-borne Giardia pathogens in reclaimed water from a full-scale wastewater treatment plant with MBR experiencing membrane integrity failure, and assessed the associated risk for green space irrigation. Due to membrane integrity failure, the MBR effluent turbidity varied between 0.23 and 1.90 NTU over a period of eight months. Though this turbidity level still met reclaimed water quality standards (≤5 NTU), Giardia were detected at concentrations of 0.3 to 95 cysts/10 L, with a close correlation between effluent turbidity and Giardia concentration. All β-giardin gene sequences of Giardia in the WWTP influents were genotyped as Assemblages A and B, both of which are known to infect humans. An exponential dose-response model was applied to assess the risk of infection by Giardia. The risk in the MBR effluent with chlorination was 9.83 × 10^-3, higher than the acceptable annual risk of 1.0 × 10^-4. This study suggested that membrane integrity is very important for keeping a low pathogen level, and multiple barriers are needed to ensure the biological safety of MBR effluent.     

输水情景下白洋淀好氧反硝化菌群落对溶解性有机物的响应

溶解性有机物（DOM）是影响微生物群落演变的重要因素,而生态输水是白洋淀的一个重要特征,为了探究输水情境下DOM对好氧反硝化菌的影响,本文结合水体DOM的组分解析和好氧反硝化高通量测序技术,进行了水体好氧反硝化菌对DOM的响应研究.结果显示,白洋淀水体DOM的相对浓度存在显著差异,河口区要低于内部区;DOM呈现出较强自生源特征,河口区具有更高的分子量和更强的腐殖化;平行因子法解析出3种类蛋白组分和1种类腐殖质组分,类蛋白组分占比达到35.64%~96.38%,与荧光区域积分得到类蛋白占主体的结果相一致.与此同时,该时期水体好氧反硝化菌主要属于变形菌门（Protebacterice）,主要包括Cupriavidus、Aeromonas、Thauera、Shewanella和Pseudomonas,与随机森林筛选出的指示物种相一致;网络分析得到35个网络关键节点,主要隶属于Thauera、Cupriavidus以及Unclassified_bacteria;冗余分析（RDA）显示类腐殖质物质是影响水体整体好氧反硝化菌群落组成的因子,类蛋白物质是影响指示物种群落和关键节点群落结构分布的重要因素.综上可知,水体溶解性有机物中类蛋白组分可以作为筛选适于生态输水期水体特征的耐低温高效好氧反硝化菌的碳源选择.     

江苏陆地海岸线绿潮藻种类组成及分布特征

2012年12月—2013年5月对江苏启东蒿枝港至连云港西大堤长约730 km岸线内的69个岸滩堤坝站点进行了绿潮藻种类组成及数量分布调查.结果表明:绿潮藻出现的站点占总设置站点的26.09%,出现绿潮藻岸线长度约占整个江苏调查岸线长度的22.83%;岸滩上绿潮藻主要生长在沿岸石堤、养殖围坝和植被较浅相对稀疏的草滩上,绿潮藻种类组成主要有浒苔(Ulva prolifera)、曲浒苔(Ulva flexuosa)和缘管浒苔(Ulva linza).1—3月浒苔为主要优势种,4—5月曲浒苔为主要优势种,缘管浒苔在历次调查中其湿重生物量均很低.5月岸滩上固着绿潮藻量约36.7 t,不及海上飘来附着在岸滩上绿潮藻量的1/10,岸滩上固着绿潮藻中浒苔的量约为同期海上飘来浒苔湿重生物量的0.6%,岸滩堤坝不会是引起绿潮暴发的主要源头.     

市区餐饮娱乐业环境管理浅见

本文从实际出发对市辖区餐饮业这个突出的环境敏感问题，查摆了现象，分析了产生原因，结合现阶段市辖区餐饮业环境管理实际，提出了针对性整改的措施。     

Preparation of in-situ nitrogen-doped lignin-based porous carbon and its efficient adsorption of chloramphenicol in water

Porous carbon is an excellent absorbent for pollutants in water. Here, we report a breakthrough in performance of porous carbon based on lignin prepared using sodium lignosulfonate (SLS), potassium carbonate and melamine as precursor, activator and nitrogen source, respectively. A series of characterization tests confirmed that in-situ nitrogen doping greatly enhanced porous structure, resulting in a specific surface area of 2567.9 m² g^?1 and total pore volume of 1.499 cm³ g^?1, which is nearly twice that of non-nitrogen-doped porous carbon. Moreover, adsorption experiments revealed that at 303 K, the saturated adsorption capacity of chloramphenicol was as high as 713.7 mg g^?1, corresponding to an improvement of 33.7%. Further, the prepared porous carbon exhibited a strong anti-interference against metal ions and humic acid. The adsorption process was confirmed to be an endothermic reaction dominated by physical adsorption, indicating that an increase in temperature is conducive to adsorption. The results of this study show that nitrogen-doped lignin-based porous carbon prepared by in-situ doping is a promising material to significantly alleviate water pollution owing to its low cost, excellent pore structure and good adsorption properties.

     

气泡尺寸对清洗固体表面油脂及颗粒污染物的影响

为明确气泡清洗技术在罐底油泥清洗中的应用情况,考察了气泡尺寸差异对固体表面清洗效果的影响。搭建了玻璃表面油污气泡清洗可视化实验装置,并设计了气泡发生器。该发生器可通过调节气液比产生多种尺寸分布的气泡。实验中产生的气泡直径分布于80~1 200 μm。研究了气泡尺寸、清洗时间、距离和角度等参数对清洗效果的影响,结果表明,在液体流量为2.5 L·min⁻¹条件下,清洗去除率随气泡尺寸的增大而提高,气泡的平均直径为800 μm时的清洗效果最好,能够将去除率从用水清洗的4.5%提高到68.3%,且当基底与水流方向为45°时的清洗去除率高于垂直或平行放置。上述结果说明,气泡撞击和破裂产生的水射流和涡流冲刷作用是主要的清洗机制。本研究结果可为高效处理油泥污染问题提供理论和实践参考,为罐底油泥清洗开拓新的解决路径。     

Manganese-modified biochar for highly efficient sorption of cadmium

Environmental Science and Pollution Research - In this study, corn stalk was modified by manganese (Mn) before (MBC1) and after (MBC2) pyrolysis at different temperatures (400~600 °C)...     

曝气-絮凝处理垃圾渗滤液研究

通过现场处理 ,对垃圾渗滤液的曝气 -絮凝处理进行了研究。结果表明该方法对渗滤液的色度、COD、总磷去除率达 80 %以上 ,对氨氮去除率达 60 %以上。在此基础上提出了最优综合控制指标